I replaced the screen on my late 2007 laptop, now it won't boot. It Bongs and the wheel turns and then it turns off. I have tried a tech tool pro 3 disk, no results tried the osX tiger disk no results but bong and wheel. any ideas?
I replaced the screen on my late 2007 laptop, now it won't boot. It Bongs and the wheel turns and then it turns off. I have tried a tech tool pro 3 disk, no results tried the osX tiger disk no results but bong and wheel. any ideas?
I have not tried disk warrior yet,but will. I had it stored until I could get screen, battery is dead, and to be honest I forgot which OS I have in it, If I can Get screen up maybe I can get my info.
sbckr
Hi there sbckr,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
-Griff W.
Similar Messages
-
i deleted photobooth by accident and i have tried to get it back with the setup disk, i got imovie and garageband back but not photobooth. Any ideas?
PhotoBooth is not on the iLife disk which has iMovie and Garage Band. PhotoBooth is integrated into OSX, so it's not going to be easy to get back. You'll need to get it from the recovery disk or partition. Which OSX are you using so we can point you in the right direction. NEVER delete any of the OSX programs.
-
When launching Illustrator on Mac OSX 10.9 I get an error that the program is no longer supported on PowerPC. I tried moving the plug-ins to a different folder as the Adobe site suggested but no luck. Any ideas how to get this launched again? Same issue for Photoshop and InDesign
You will need to uninstall, run the Cleaner tool and reinstall you adobe applications. Adobe apps don't take kindly to inplace updates of the OS on Macs.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?
There were no PowerBooks made in 2007. By then Apple had switched over to Intel and they were making MacBook instead.
If the MacBook is what you really want try http://en.wikipedia.org/wiki/MacBook
Allan -
i plugged in my iphone 5S and locked the screen 20 minutes later I tried to open the phone it will not turn on i treid reset and that wont work I have a black screen,
I tried just holding down the power key...NOTHINGDo a reset, hold down the home/sleep button together until you see the apple logo and then release.
-
I have a red "i" message - The backup disk image “/Volumes/_________’s Time Cap/Macintosh.sparsebundle” is already in use.
Any idea how to fix this?Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This simple reset will fix this issue 98% of the time. If you are in the unlucky 2% category, more help is here:
The Backup disk image ... sparsebundle ... is already in use. -
The small security lock use to be located at the bottom right of the screen. It is not there now when I go to secured sites. Where is it now?
The padlock has been replaced by the site identity button, for details on using it see https://support.mozilla.com/kb/Site+Identity+Button
-
When trying to download apps on my new iPad I keep getting prompted to update my security questions for my safety. When I choose this option it freezes and won't load the questions, however, when I hit not now it won't let me download. What do I do?
Reboot your iPad and then see if you can set the security questions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?
Try here:
iOS: Not responding or does not turn on -
My iphone 4 has died and says connect to itunes. itunes restore wont work, error message 2001, then 2006 appears.Tried all the troubleshooting help, but nothing works. Any ideas???
I solved my own problem. Hopefully this will help someone else.
I did a DFU restore, then started it up as a new phone on iTunes. Everything loaded properly, then from iTunes did a restore from backup, selected the one I wanted and it still took me to the same screen with 3 options of restore. I chose the start up as new phone from the actual phone and after all the syncing was completed, my phone is back in working order. -
My ipod 4 Generation wont start. I have tried the hold lock button and home button but it wont work. any ideas?
Try holding the buttons longer--at least a minute or until you see the Apple logo light up.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
My iPhone is not receiving mail but the following messages continue to flash over and over at the bottom of the screen: "Checking for messages, Updated just now, Checking for messages", etc. After a minute or so it will flash downloading 1 - 32 messages but nothing is received and then the "Checking for Messages," etc. starts back again. I turned the phone off for 30+ minutes and also tried to reset it, but the problem continues. Any ideas on how to solve the problem?
Double click the home button and swipe up the messages app to stop it, then open the app again. This pretty much completely stops the process and freshly opens it again, resolving problems at times. I have had this happen before as well on my iPad, I get a banner, check messages, and nothing new is there.
If that doesn't work, close the app like suggested above, but then restart the phone by holding down the home and lock button for 10-15 seconds until the apple logo appears. -
I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?
You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
Please help! I can power the device off but when i try to unlock the screen its like it cant feel my finger tracing over my unlock design, thus I cannot sign into itunes to download what i have before I possibly loose everything My warranty is expired and I dont know if there is any other solution before I dump a bunch of money into this devise. ThaNK YOU!
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
i completed a software update yesterday and whenever I try and launch iTunes now it crashes almost immediately. I have tried downloading an installing the latest version but to no avail - any ideas?
Have you tried temporarily turning off your firewall and antivirus software until the download has completed ?
Maybe you are looking for
-
Time Machine failing on Snow Leopard
Hi all For some weeks now Time Machine has been telling me that it is unable to back up because there isn't enough space on the allocated hard drive. I am on OSX 10.6.8 and am backing up to a 500GB internal hardrive, which I appreciate isn't large (
-
Session sharing in weblogic 7.0
Hi I am using weblogic 7.0 and want to know if we package 2 wars in one ear can we share session accross 2 wars. Say war 1 puts a variable in session and then from war 2 another variable tries to acce
-
HD (letterbox) will not appear on DVD when Quality is set to 16:9 or 4:3
Been around the block on this so far, not real solutions and it was suggested to post here. The footage is all ingested as CineForm codec, exported out as separate songs to MPEG2, then built in Encore, buttons etc. Minimal tweaks. MPEG2 because Dyn
-
Component "power dissipation" report using Multisim
Hello, I have a large design that has 66 resistors and 38 transistors. As a sanity check, I'd like to be able to have Multisim let me know the dissipated power in each of these components. I know how to do this on a component by component basis in
-
Newest iOS Upgrade iPhoto Issues
I save a lot of images that are emailed to me. At a later date I like to upload them to Facebook. After this new upgrade...Every time I hit "save photo" it is NOWHERE to be found??????? Any words of wisdom would be appreciated thank you!