I reset a Linksys extender, when I try to navigate Safari using The Linksys network, a Box askin for username And password pops out. What is this about?

Ask Linksys. If you reset the extender it presumably lost the username and password it was supposed to service. I'd just supply the name and password and move on.

Similar Messages

When i try to download most of the creative cloud apps, it comes up with an error -2147024546. What does this mean?

when i try to download most of the creative cloud apps, it comes up with an error -2147024546. What does this mean?

Nfunchio13 that is fairly unique error. Unexpected errors like this are typically the result of the firewall settings or security software interfering with the Adobe Creative applications from being downloaded.
Nfunchio13 what type of networking environment is your computer utilizing? You can find guidance on how to resolve download errors at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

When I want to connect to my macbook from my imac eventhough it shows up in the finder it still keeps asking for username and password!

there is a flashing window which keeps asking: "enter your name and password for the server "192.168.1.102" (which is my Macbook's ip address)". choices are:
connect as: Guest or Registered User; Name and password; at the bottom: cancel or connect....
whatever I do it keeps coming back! I select: guest , click connect; it says "the server 192.168.1.102 does not allow Guest access".
I select Registered User; enter Name and password, the window disappears for a second without any popups but comes back up again .... "enter your name and password for the server........."
Just to see what response I would get I wrote different/wrong name and password; it said "you entered an invalid username or password please try again".... and then I click OK ....
and I am back to square one! I click cancel same thing ....window keeps coming back up asking me to "enter name and password for the server......."
Meanwhile when I open Finder; under SHARED I see 2 entries: "192.168.1.102" connected as "Ni... ZA..." (My user name) and "Ni.... Macbook" which has the same ip address as above and also connected as nidra... my other user name.
All the sharing files are on; security/firewall is off...
I just bought the iMac, 21.5 inch, 2.5 ghz, intel core quad i5, 500 gb

On your MB, go to system preferences>user and enable the guest account and login to that account
On your MB, go to system preferences>user and create a new user for remote access, choose a password and login to that account.
Either of these should work, if not, post back.

I have Photoshop CS3 which I have used successfully for a number of years. I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file. What

I have Photoshop CS3 which I have used successfully for a number of years. I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file". What do I need to do to open my NEF files?? Thanks.

Thanks for the quick reply, CP
FYI, the file is a photographic panorama based on several .CR2 photos taken in July, 2012 and processed in CS5's camera RAW/Photoshop. Beyond the metadata, here are no fonts or text in the file.
1. I changed Maximize ...File Capability from "Never" to "Always" and the flattened file saved and loaded OK, though I can't figure why given Adobe's description of this option. "If you work with PSD and PSB files in older versions of Photoshop or applications that don’t support layers, you can add a flattened version of the image to the saved file...". The file saved in this manner is ~8% larger and is not my preference as a routine since I've TB's of photo files. By the way, out of thousands of .psd/.psb files, the one being discussed is the first to give me the error.
2. I've tried saving/reloading the file on another computer with Win XP Sp3/CS5...again with Maximize Capability OFF. Same problem. Turn ON Maximize Capability and it works. As with the Win 8 machine, Bridge could neither create a thumbnail or read Metadata.
3. I've purged the Bridge Cache, made sure there were no old PS page files, reset PS preferences, and disabled my 2 plugins with no change in the problem. Windows and Adobe progs are all updated. Saving to a different HDD has no effect.
The problem occurs on 2 computers (Win XP/Win 8), two versioins of Photoshop (CS5/CS6), and "Maximize" On/Off togles the problem. My guess it is a bug in PSD processing routines.
If I can't find a fix, will keep with Maximize ON and deal with the larger files that result...the cost of insurance, I suppose.
Thanks again

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks

sandrafromsilver spring wrote:
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
Go to the following link:
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

HT201272 I downloaded an album but one of the songs is corrupted, it only plays for about 4 seconds. When I try to re-download using the iTunes Store and "Purchased", it won't give me the option to download it again. How can I get the song I PAID for!!??

I downloaded an album but one of the songs is corrupted, it only plays for about 4 seconds. When I try to re-download using the iTunes Store and "Purchased", it won't give me the option to download it again. How can I get the song I PAID for!!??

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

When I try to download software from the internet I only get a black screen and the software never downloads.

When I try to download software from the internet I only get a black screen and nothing downloads. I attempted mozilla firefox and software from a photobook site just to name a couple.

How much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.

Word 2010 prompts for username and password when opening a document on trusted website

Hi Guys,
We have a website (not sure if the site is a sharepoint site) on our trusted domain that asked for username and password when trying to access it. I added the site to our trusted sites zone and this resolved the issue however when I try to open word documents
I get prompted for usernames and password again if I cancel the credentials box the document opens with no issues.
Below is some of the steps i have taken
- Tried opening other non office documents (e.g. PDF, JPEG) and they open with no issues
- Tried to opening the word documents with a system that only had word pad install and not Office 2010 and the documents open with no issues so it looks like it's an office 2010 problem
Can you please advise how I can resolve this issue and if this is a client issue or an issue on the web server thanks

Hi,
This issue is caused by the Office suit itself. When Internet Explorer opens an Office document, the appropriate Office application is started with the path of the document. The Office application then tries to access the document directly from
the server. This differs from other browsers and other file types. Most browsers download the file and call the application to open the file from the local cache. However, when this occurs, if the opened file is changed and saved,
the changes are only made to the local copy and not to the server copy.
To establish the richest experience possible, the first thing that the Office application does is communicate with the server to determine the server type and what web authoring protocol is available. The application does this by making
an OPTIONS request directly to the server.
As a new process accessing the server, the Office application is required to renegotiate authentication. This method is more secure than a method in which the new process uses an existing authentication that was established by the browser.
Please try the following methods:
An alternative with full functionality but with a calculated risk
Client approaches that can reduce the impact
Alternative configurations when the web server does not support DAV or reduced functionality is acceptable
For more detail information, please refer to the following link:
http://support.microsoft.com/kb/2019105/en-us
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

When using SSL Word Files ask for username and password.

I have SharePoint Foundation 2013 setup and it works great. I need to allow users access when they are not connected to our local network, so for testing purposes I added a domain signed certificate and assigned it to IIS on 443. Internally when
I try to access the site IE now ask me for a username and password and when I open a word file Word then ask me for a username password again. If it didn't do it in http why is it happening with https and how can I fix it? Externally I know users will
have to login but they should have to only login in once right?

After doing some more research it seems that it is just not possible to use Windows authentication along with FQDN without being prompted for username and password in SharePoint. Can anyone confirm this? I am sorry what a bad design of a program.
Did anyone think at Microsoft that organizations might want employees to work from outside of their network in the year 2013 using the username and passwords they already have.

HT5625 I'm trying to create a new Apple ID but when I was putting on my information, there's a box asking for an ITunes gift code. What's this and how can I get one?

I'm trying to create a new Apple ID but when I was putting on my information, there's a box asking for an ITunes gift code. What's this and how can I get one?

You're not obligated to insert a gift code. But you can purchase gift codes on the Apple online store (gift cards or certificates) or Apple Retail store
Gift codes are pre paid cards so you can use credit on the iTunes Store to purchase content
To create apple ID without payment method:
http://support.apple.com/kb/HT2534?viewlocale=pt_PT

HT201363 I cannot find the answers to my security questions for Itunes and cannot figure out how to reset them

I cannot find the answers to my security questions for ITunes and cannot figure out how to reset the questions.

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(105414)

Dear Apple I buy a refurbish iPhone 5s the IMEI ******* and ICCID ******** and i restored the device when i restored its locked to iCloud and i don't know the username and password i hope to help me about the problem asap. Best regard

Dear Apple
I buy a refurbish iPhone 5s the IMEI ******** and ICCID ********** and i restored the device when i restored its locked to iCloud and i don't know the username and password i hope to help me about the problem asap.
Best regard
<Edited by Host>

This is a user forum. You aren't talking to Apple here.
Return your iPhone for a refund. There is no way to remove the Activation Lock. Apple won't get involved.
<Edited by Host>

Prompt for username and password when executing servlet

In Weblogic 5.1 when I set the username and password in weblogic.properties file, it prompts for the usertname and password when I execute the gatewayServlet
weblogic.allow.execute.weblogic.servlet.servlets/gateway.administration=vijay
weblogic.password.vijay=password
But I guess this is not the way it can be implemented in 8.1. Please let me know how I can prompt for username and password when executing the servlet. I dont want it to be done programatically. Please let me know whether I can set anything on the properties file.
Thanks
Vijay Subramanian

You can use Apache ACLs, http://httpd.apache.org/docs/1.3/howto/auth.html
GoodEvening!
I'm developing a web application using jsp
technology.
When the user digit:
http://<machine address>:<port>/<applicationName>
I would that a browser prompt login is diplayed to
the user for enter him username and password,
before loading the index.jsp page. Is possible
without using awt or swing components?! using only
the browser's prompt dialog?!
p.s.
sorry 4 my bad english! ;-)

Outlook 2013 - Exchange 2013 - Prompts for username and password when EWS basic authentication is enabled

So we have an Exchange 2013 environment, and a CRM solution that requires basic authentication to EWS internally. Problem is, after a reboot of our Exchange server, all of our Outlook clients begin prompting for username and password (which nothing
works) which also starts locking users AD accounts out due to failed login attempts (somehow). If I disabled basic authentication on EWS, Outlook authenticates as normal using NTLM and there are no issues. Once Outlook has authenticated, I can
turn back on basic authentication, and Outlook will be fine until the next time the Exchange server is rebooted.
Any ideas?

Hi,
According to your description, I understand that Outlook client prompted for username and password when Exchange server restart and basic authentication is enabled for EWS.
If I misunderstand your concern, please do not hesitate to let me know.
It’s normal. This caused by the difference between basic authentication and NTML authentication:
Basic, with any version of Outlook prior to 2010, results in a pop up dialog asking for creds. Outlook 2010 makes the 'save this password' actually work, so in an Outlook 2010 or later world, Basic can mean no need to authenticate every time you open/reconnect,
but in all earlier versions, you will have to enter creds every time.
NTLM, when used by a client that is domain joined and logged in with cached creds, results in the client simply sending the cached in creds to the server, resulting in what looks like a pretty seamless single sign on experience. However, if you want to do pre-authentication
at something like TMG, and not let the traffic go all the way to CAS, you need to configure TMG for this.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

I have AirPrint on my Ipad...when I try to printected my printer, a box comes up asking for username and password. What do I do?

I have AirPrint on my Ipad...when I try to print, a box opens and wants username and password. HELP!!

What is the content of the target field of that shortcut if you open the properties via the right-click context menu?

I reset a Linksys extender, when I try to navigate Safari using The Linksys network, a Box askin for username And password pops out. What is this about?

Similar Messages

Maybe you are looking for