I reset my iphone 5s now it won't turn on
Its stuck on the apple
DDo a reboot press power button & menu button hold both down
until il you see Apple Logo you will not lose any data.
bsydd UK
Similar Messages
-
Dropped iPhone and now it won't turn on??? :(
Dropped my iPhone 3GS and now it won't turn on. I didn't even drop it that far or anything but now for some reason it won't turn on. I've already tried resetting it several times and it hasn't worked. I plugged it in to charge it and nothing happened and when i plug it in the computer with the dock, nothing happens and it won't even show up under devices in iTunes.
Please help.
-SammiI believe the correct technical term is... "you broke it".
Take it in for service. An out of warranty replacement from Apple is US$149. -
I updated my iphone and now it won't turn on
i updated my iphone and now it just wont turn on! The apple sign comes up as if its going to turn on and the sreen goes darker and just goes blank. why wont it turn on? its been doing this for the past half hour
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
I tried to update my iPhone 5s now it won't turn on.
I've plugged it into my laptop and it came up on iTunes stating the phone is in recovery mode, I clicked to restore the iPhone and it is currently doing so now. I don't understand how I updated my ipad and that had no issues yet my phone did? Will my phone turn on after the iPhone has restored? I'm worried as I've not even had the phone that long. I had no issues before the update.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Please Help
i dropped my iphone, sceen smashed, but worked afterwards.
10 mins later was not working.
i was just ready to take to a shop and i googled, found you guys
so i was pressing te lock and home key b4 but only for a few seconds, no joy.
you guys advised me more 10-15 sec, after 10 second heart melted still no joy
....but....
18 seconds it work
thanks every1 xxx
just got to go get screen fixed now x -
Dropped my iPhone 5c now it won't turn on
I dropped my iPhone 5c it isn't cracked or anything but will not turn on , can anyone help
If it won't respond to holding the power and home buttons down at the same time for 10-15 seconds, then make an appointment at the genius bar and have it checked. It's likely it will have to be replaced.
-
Just updated my iphone 5s now it won't turn on at all?
I have recently just updated my iphone 5s to an update that I have received today about fixing a problem in China. I updated the phone. It turned itself on and hasn't turned itself back on nor can I turn it on at all.
It makes us 3 having this issue https://discussions.apple.com/message/24702787#24702787
-
I bought an iphone 5 c off craiglist and when I got home I factory reset the iphone and now it ask for an Apple ID of the previous owner but the previous owner won't give it to me
Find My iPhone Activation Lock- Removing a device from a previous owner’s account
Only the former owner can remove the Find My Phone lock and erase the device. That can be done remotely. Without this the device is useless to you because it will be permanently locked. -
my iphone 4 turned off and now it won't turn back on I've tried charging it and plugging it into my computer but it's still a blank screen. please help me.
Intel-based Macs: Resetting the System Management Controller (SMC)
-
Have updated my iPhone 5c to iOS 8 and restored it and now it won't turn on. I have tried plugging it in even though I know it was fully charged, I have shut down my rebooted my computer and iTunes from scratch and reconnected my phone and still nothing, any ideas?
Hello Nikmuz,
It sounds like your screen is either black so it looks like it is not on, or it is just plain not turning on at all and it is also not being recognized in iTunes. I would recommend the followng troubleshooting from this article to help you determine whether that is the case or not, named:
iPhone: Hardware troubleshooting
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
While connected to the iPhone charger, try to reset the iPhone.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I just reseted my ipod and now it won't let me download any apps. Why?
i just reseted my ipod & now it won't let me download any apps. Why?
Hi
I'm having the same problem on my iPads, iPods and iPhones. All use the same apple I'd for the App Store.
Has been like this for a few days. Happening with updates, new apps and if I delete and try to re-download. -
I turned my iphone off when visiting the doctor's surgery and now it won't turn back on. It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens. I have taken out and replaced the sim card too. Any suggestions
If wjosten's tip doesn't work try plugging it into a USB charger (not through your computer), wait about 30 seconds and it should come on. If it doesn't remove the cord from the phone and keep trying this. I've had this same issue and found a combination of the reset & charging cable tends to work. Sometimes it takes about 5 minutes for the phone to respond.
Best of luck. -
My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I updated my iPhone 4 to version 7.0.3 and now it won't turn on
I updated my iPhone 4 to version 7.0.3 and now it won't turn on
Are you sure the update is done?
You can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up. -
my screen just turned blank white randomly and now it won't turn off/reset or connect to a computer or really do anything... need help.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Some other users have had the same problem
Maybe you are looking for
-
PSE 7 catalog error when restoring backup from PSE 5
I am attempting to move from PSE5 on XP to PSE7 on Vista using the backup-restore method, . Catalog is about 75 MB, data set is 56 GB, all stored on external USB drive. Tried restoring in new folder using both with and without restoring folder arrang
-
Hi everyone, I want to accomplish a task in TFS that I need to auto generate the database changes as SQL script file in drop folder for every build. For ex.: If I add a table in a database and then check in the changes, I need to get that
-
BI transfer rules missing .
Dear all, we had made a system copy of the source system (ECC) and with BI (Scm) system i.e both the systems on Quality was refreshed with prod , now we get the error that transfer rules does not exist on the copied BI system . Could any one help R
-
My ID files will no longer open?: I need to update our catalog. Please help
My archived ID Files will no longer open in ID 2014. Please help, I need to update our catalog.
-
DCR-TRV27 (phased out in 2002) - Can't get lens picture to display
I have an old Mini-DV camcorder that I'd like to use this weekend for an event that came up suddenly. I've plugged everything in and recharged the battery...everything works except that I can't get the picture from the lens to display in the viewfin