I reset my ipod and he dont want restart  the apple logo stay and sometime with flash appear

Please help me

Jailbreaking can have unintended consquences.  Jailbreaking can't be discussed in this forum since it vialate the lience agreement.

Similar Messages

  • When I reset my ipod touch 3gen it frooze at the apple logo...

    HELPPP, my ipod 3rd gen frooze so i decide to reset it, even when i reset it frooze at the apple logo when switching back on....

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I erase all content and settings in ipod. Now the iPod won't turn on. The Apple logo with black background is the only thing that appears.

    I erase all content and settings in ipod. Now the iPod won't turn on. The Apple logo with black background is the only thing that appears.

    put it into recovery mode
    See here
    http://www.apple.com/support/ipodtouch/assistant/restore/
    Then restore
    http://support.apple.com/kb/HT1414

  • My ipod touch would not go past the apple logo, it would just shut off. i held the power and home keys and connected to itunes

    my ipod touch would not go past the apple logo, it would just shut off. i held the power and home keys and connected to itunes but now its on the connect to itunes picture and shuts off on its own. even if i try and shut it off myself it won't. it only stays on for about 3-5 minutes:( please help!!!

    When it shows the Connect to iTunes screen and you connect it to iTunes, have you tried restoring it?
    This should solve your problem because the most common cause of your issue is a software glitch that is preventing your iPod from completing it's boot sequence. Restoring it will replace the software on the iPod with a fresh set so it can be used again.

  • My 4th Gen Ipod touch will not get past the apple logo

    My 4th Gen Ipod touch will not get past the apple logo (unless the battery is dead, Then it tell me to charge it).  Once it gave me the connect to itunes screen.  I clicked restore in itunes but the ipod went back to the apple logo before the update download finished. I tried calling apple but my over the phone technical support just expired. PLEASE HELP! 

    This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
    1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
    2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
    3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
    4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;)

  • HT201263 my ipod touch refuses to go past the apple logo

    my ipod touch refuses to go past the apple logo. i turned it off with both the sleep/wake and home buttons but it immediately turned right back on without me making any attempt to turn it back on. my ipod will not even turn off with the sleep/wake button fyi. i just did an update through itunes with the ipod plugged in and when the update was finished/finishing my ipod went to the apple logo.
    update: my ipod flashed white, turned off, then turned back on- yet again the apple logo.

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My 4th gen Ipod nano keeps getting stuck on the apple logo.

    My 4th gen Ipod Nano keeps getting stuck on the Apple logo screen, this happens everytime I plug it in to charge. I plug it in, an apple logo comes up, and it stays like that the entire time its plugged in. To get it to unfreeze, i have to press random buttons and unplug and re plug in earbuds. After 20-25min of doing this it unfreezes and I come to find it has gotten little to no charge after being plugged in for hours at a time. Any one else have this problem, and if so what do you do?

    This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
    1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
    2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
    3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
    4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;)

  • My iPad4 switched off on it's own, and when I tried to reboot it, it gets stuck on the apple logo.(or sometimes a small loading whirlwind thingy)  What should I do? Thanks

    My iPad4 switched off on it's own, and when I tried to reboot it, it gets stuck on the apple logo.(or sometimes a small loading whirlwind thingy)  What should I do? Thanks

    Sorry, I'm here, but I am at work.
    If you do not have a backup and iTunes will not let you backup now, unfortunately you will lose everything.
    I'm not sure that I understand what you saying about iTunes not nothing the device being plugged in, but I iTunes does not see the device that is one of the reasons that you need to use recovery mode.
    If you are running iTunes 11 and you cannot see the iPad under the devices heading because you can't see the sidebar - go to View>Show Sidebar at the top of the screen in iTunes.

  • I recently bought the first generation ipod touch, but it doesn't work. I've tried restarting over and over, i've tried switching cables too. The apple logo stays on the screen and freezes, it then shuts down and repeats. My laptop doesnt recognize it.

    Please help
    I bought it through a mutual friend.

    - Connect the iPod to your computer and try to make a backup
    iOS: How to back up and restore your content
    - Next reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    and try making a backup again. If you can't then there is no way of getting the info off the iPod unless data recovery company can do it. Not cheap.
    - If photos are in an existing iPod backup (iTune>Preferences>Devices  for iTunes backup or an iCloud backu) then restore from that backup. See the restore topic of:
    iOS: How to back up
    - If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer

  • Ipod nano 4th generation switches between the Apple logo and the menu

    I have a 4th generation 8 g iPod Nano that probably has about 1 hour of use since my wife won it in a raffle over a year ago. When I went to recharge it yesterday, the only thing that happens is that the display, when connected to the computer, flips back and forth between the Apple logo and the menu screen. Whenever either one of them appears, it will disappear in a few seconds, then repeat the sequence. I have done a reset and restore,and installed the latest software version but the same thing happens over and over again. If the iPod is detached from the computer, ie, its power source, NOTHING happens on the display. It black and you can't get it to show anything. My theory was that the battery needed to be replaced even though it wasn't used much in the year since she got it. In fact. the absence of use and recharging it and discharging it may have lead to this problem in the first place. However, my one issue with that theory is that, when connected to a power source, like the computer, I would think I could get it to function normally, which I can't. I was able to get to the "service menu" which won't disappear when I move about different choices, as long as its connected to the computer. Again I can get nothing if its not connected to a power source.. does anyone think that this problem could be solved by replacing the battery or does it seem like that is only part of the problem? Thanks for any help and suggestions you may have to offer.
    Geoff

    Despite the Nano only being used for an hour or so, the battery needed to be replaced= problem solved!!

  • When I try starting my iPod touch, it won't start; the Apple logo comes up for a few seconds, and then, it just shuts off. I tried to charge it through an outlet; the iPod didn't even charge, so I tried to restore my settings on my computer. iTunes won't

    when i try starting my IPod  it won't start, the Apple logo comes up for a few seconds,and then. it just shut off . I tried to charged it through an outlet, the IPod didn't eve charger so I tried to restore my setting in my computer, i tunes won't

    But that requires the computer to see the ipod. I am having the same problem and I keep being told to restore it, but you have to either get the ipod to turn on or have the computer see it in order to so that. Right now I have a pretty useless 32GB ipod touch cos I cant get the thing to turn on! I can only get the apple logo for like maybe 20 seconds and it goes away. Ive charged it for days on a wall charger, on the computer usb charger, and on a speaker charger. Nothing works.

  • Why is my ipod nano 5g always stuck on the apple logo when i turn it on.I have put it n disk mode and repaired it with microst essentials and it says all was fixed but when i restart it it still is stuck on it.Also itunes doesnt reconize it

    so when i turn of my ipod its always stuck on the apple logo.Ive tried disk mode and it still doesnt work.Also it isnt reconized on itunes so i need help badly

    Did you try rebooting the iPad? You will need to have some battery power for this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This may be helpful
    iPhone, iPad or iPod touch: Not responding or does not turn on
    Frozen or unresponsive iPad - Apple
    iPad: Unable to update or restore

  • How do I restore my ipod 4g when its stuck in the apple logo and the sleep button is broken?

    I really need help! Its stuck in the apple logo and my sleep button is broken. So i cant go into recovery mode.

    Try:
    - iOS: Not responding or does not turn on
    When it says try recovery mode use one of these programs
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Ipod 5th Gen is stuck on the apple logo with the loading bar not moving

    So I recently decided to restore my iPod 5th gen to factory settings, because I plan on selling it to a friend. When I chose the option to erase all data and reset settings, the iPod turned off, and then came to the black background with the apple logo in the middle. After watching it turn on and off, and not do anything for at least an hour, I searched for answers on the forum. I found that I should reset my iPod by holding the center button and the top right button at the same time for at least ten seconds, or until the device shuts off and then the apple logo is visible again. After I did this, once again, the black background with the apple logo popped up, this time with a loading bar beneath it. After an hour or two of checking on the progress bar, I noticed that it had not made any progress whatsoever. It had not moved an inch since I first started it. What do I do?

    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • How do I fix my iPod if it is "hung" on the Apple logo?

    How do I fix my iPod touch if it is "hung" on the Apple logo?

    Try here:
    iPhone and iPod touch: Frozen and unresponsive

Maybe you are looking for

  • Error message: when downloading data from 2nd display tag table

    I am using disaply tag to display data in jsp page. I am using three different section to display the data with three display tag table. The data is displaying correctlly. The display tag downlod excel sheet is working for first display tag table. Wh

  • Dell Equallogic SAN HIT Kit support for SAP in Linux 11.2

    Hello Everyone, I would like to use an Equallogic SAN as storage in SUSE Linux Enterprise Server 11.2. Is the Equallogic SAN supported in Linux when using the HIT Kit to provide MPIO and snapshot support? The article from thorsten.staerk describes Eq

  • Query Variable

    Hi friends, I have a query, i need to make 0Region as a selection option for which i have to create a variable. I have created a variable but my problem is it is taking only single value, how can i change that to hold multiple values. Cany anybody he

  • How to mapp in transpe 0recordmode in ods at the time of generic extraction

    hai, i am facing one problem i had customeized table contents like two fields in table like vendor code and branch name when ever enter the bw point of view 0 recordmode how to mapp to transfer structure if u have any idea plz let me know regards, mu

  • BT NetProtect Plus Error message in event log - mf...

    Hi, Anyonwe know why I am getting a warning in the system event log as follows "Process **\MCSHIELD.EXE pid (2588) contains signed but untrusted code, but was allowed to perform a privileged operation with a McAfee driver." Source:    mfehidk Event I