I reset my ipod shuffle gen 2 successfully but it still isn't recognized by itunes

I downloaded iPod Reset Utility and according to the app, my iPod shuffle was reset successfully.  However, it still isn't showing up in my finder and iTunes says it can't recognize the ipod until it is reset.  Also, the lights don't go on.  Battery dead/needing replacement?  Can it be reset without a functioning battery?

First, try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Similar Messages

  • IPod 5th gen 30gig won't charge and isn't recognized by iTunes

    I recently replaced the battery in my iPod 5th gen because I thought that was the problem.  This fixed things temporaly and my iPod turned on for this first time in a long time.  However, now it won't charge or hook up to the computer.  I think this may have been the problem all along. 
    The charging port seems to be in good condition and pretty clean.  I have tried resetting it and resetting it while connected to itunes.  I also disconnected and reconnected the new battery.  I left it plugged in for sometime but it hasn't charged.
    Any suggestions would be appreciated.  I really have no idea what the problem is at this point.
    Thanks

    I suspect that you have a completely dead battery.
    i got this ipod about a year ago
    If you mean 11 months, a battery replacement is under warranty but $30 shipping and handling. If you mean 13 months, a battery replacement is $59 + $7 shipping.

  • I bought my ipod shuffle used from a friend and it isn't recognized in my iTunes. Does anyone know how to reset the shuffle or what I can do to resolve this issue?

    I bought my ipod shuffle used from a friend and it isn't recognized in iTunes. I wondered if anyone knew how to reset it to factory settings and for me to be able to use it as my own.

    ... Does anyone know if it would be backed up somewhere else,
    If you do not know if you backed up your computer, how could someone else know?
    Everything you downloaded from iTunes can be downloaded again:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519

  • My iPod touch is stuck on apple logo and isn't recognized by iTunes

    My iPod touch gets stuck on the apple logo and won't let me get to the home screen. I tried plugging it into iTunes but It was not recognized. When I hold the power button down it tells me to charge it. When I do it gets stuck on the apple logo again. Please help!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HT1353 2nd gen iPod isn't recognized by iTunes nor Windows - What to do?

    I have an iPod A 1019 (2nd gen?). When I connect it to the firewire connector on my PC, the unit screen shows a checkmark and "OK to disconnect." I tried to reset with Menu + Select (=nothing happened) but Menu + Play works. Still, PC + iTunes won't recognize iPod. Help? I suspect that the software on the iPod itself is too old but since the device cannot be discovered, I can't update it. I tried iPod transfer software, but nothing recognizes my oldie. Sigh.

    Hi, Griff W.!
    Thanks for taking the time to offer me the troubleshooting steps. I tried them all, but unfortunately to no avail. I can listen to the iPod, but once I connect it to my PC with the firewire cable, it still isn't recognized in iTunes or in Windows. I checked the Universal Serial Bus controllers. The iPod is nowhere to be seen. I checked the version of the software on the iPod and it's 1.5. Maybe that's the problem: the software is too old?
    BTW, the firewire cable is charging the iPod.
    Maybe if I could find someone with an old PC that has a firewire port?  But even if I were to make the iPod visible, would I be able to copy the songs onto my new iPod? From what I've been reading probably not. It's really exasperating. They music is legit, copied from my CDs or purchased.
    I am looking at my new superslim iPod Touch 5th generation and right next to it the clickwheel iPod 2nd generation that's more than a cigarette pack sized. Progress. I guess.
    Thanks for helping out. If you have any more ideas, please let me know.
    Best regards,
    D.

  • Problems with itunes 8 and ipod shuffle gen 2.

    Problems with itunes 8 and ipod shuffle gen 2.
    I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
    When i try to drag songs directly on it, itunes says i can't
    I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
    Computer Specs
    Windows XP SP3
    384MB of Ram (works really good)
    USB 1.1 connection
    Pentium 4 clocked at 1.285 GHZ
    IPOD Shuffle Specs
    2nd Generation
    1GB (964MB)
    Version 1.0.4
    unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
    All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
    Itunes Specs:
    Version 8.1.1.10

    This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
    Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

  • Ipod shuffle 4th gen charges plays but doesnt show up in windows or itunes

    Ipod shuffle 4th gen charges plays but doesnt show up in windows or itunes tried to check usb driver but computer says it is working properly

    Just disconnecting it without ejecting should not cause permanent damage.  It may cause data corruption, if iTunes was in the process of syncing at the time.  But iTunes should still see the shuffle and (maybe) tell you to Restore it.
    Is it possible that the "accident" damaged the USB cable? 
    Make sure you have done this on the shuffle since the problem occurred
    http://support.apple.com/kb/HT1655
    And you should also shut down (power off) the computer, if you have not already.
    Have you tried more than one USB port on the computer (not a hub if you use one)?  You can also try it with all other USB devices disconnected, except for standard keyboard and mouse (if normally used).
    If those things do not help, what version of Windows do you use?

  • I have seen on this community that the earpods do not work on iPod shuffle gen 3 but when I was using on them it worked the control panel thing that is but only until I turned it off I don't understand why it won't work again and why it did in the first p

    I have seen on this community that the earpods do not work on iPod shuffle gen 3 but when I was using on them it worked the control panel thing that is but only until I turned it off I don't understand why it won't work again and why it did in the first place can someone please explain and tell me how to make it work again

    Sorry first time asking question didn't mean to write same thing twice well copy paste

  • I need help with iPod Shuffle gen. 4?

    My iPod shuffle gen. 4 will not download audiobooks.  At first I was able to download 4 books, but now the downloads go to the computer only and not to the iPod.  Any ideas?

    Did you try this way? Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer
    If this does not work, you might have to use 3rd party software like Touchcopy for example

  • HT1238 the reset utility tells me it is intended for 32 bit windows.  i run 64....what can i do to reset my ipod shuffle 2nd generation

    the reset utility tells me it is intended for 32 bit windows.  i run 64....what can i do to reset my ipod shuffle 2nd generation

    Hey harley4550,
    It sounds like you're trying to restore your shuffle to factory settings. You can actually use iTunes to do so, the following article goes over how:
    Restoring iPod shuffle to factory settings
    http://support.apple.com/kb/HT1481
    Hope that helps,
    David

  • How do i play music from my ipod shuffle gen 4 on external powered speakers

    Can I play music from my IPOD shuffle gen 4 using external powered speakers?  If so, how do I hook it up?

    First a curiosity question. Why do you want to play through the computer? Why not use headphones?
    Ok, now to your question. I have never done this before, but this intrigued me. I did some experimenting and got it to work. Here is what I did:
    1) Connect Touch to computer.
    2) Open iTunes.
    3) Your device will show up in the left panel.
    4) Click the little triangle next to your device to expand it.
    5) You now have access to the different content on the Touch.
    I have played stuff from Music, Movies and my playlists. Everything works the same way as if it was on your PC.
    Hope that helps and good luck!

  • Ipod 1st generation shuffle isn't recognized by iTunes

    Plugged my 1st generation iPod shuffle into the USB port and it isn't showing up in iTunes.
    I have read through all the Troubleshooting steps and nothing seems to be working.
    When I go to Eject Hardware though, it shows Eject Ipod, so I know my Dell PC (Windows 8) is seeing the shuffle.
    Odd.
    I'll take any help anyone has!
    Thanks.

    In iTunes, if the sidebar (along left side of window) is not visible, from the menu bar, under View, select Show Sidebar.
    When connected, the shuffle should appear in the sidebar, under DEVICES.  It does not appear there?
    If it does not, as a test, shut down (power off) your computer.  Disconnect all USB devices including hub, except for standard keyboard and mouse (if normally used).  If your PC is a laptop, connect its power adapter (so that it is not running on battery power).  Do this to reset the shuffle
    http://support.apple.com/kb/HT1655
    Start up the computer, run iTunes, and connect the shuffle to a direct USB port on the computer.  Any difference when the shuffle is the only USB device connected?

  • Im having a problem with my mic on my ipod 5th gen it works but it douse not pick up any sound unless i  talk right next to the mic. how can i fix this

    im having a problem with my mic on my ipod 5th gen it works but it douse not pick up any sound  unless I  talk right next to the mic but it sounds low  . how can i fix this

    - Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
    (When you replaced the Hardisk, you should also replace the battery.)
    Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
    You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
    Have a nice day!

  • I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed.

    I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed. What shall I do ? I tried reinstalling so many times and everything else I could find. Please help!

    Hello MArk.wijesinghe,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Best of luck,
    Mario

Maybe you are looking for

  • Vendor performance reports

    Hi Gurus, are there any reports in LIS that show the vendor performance based on quality, on time delivery and etc. we do not want to use the supplier delivery vendor evaluation componenet of the MM. But can anybody please tell me what reports are ou

  • Printing output from select-object with write-host

    $lastdir = Get-ChildItem 'C:\Users\' | select Name | sort | select -last 1 name write-host $lastdir results printed as @{Name=guptal} how do I get it just to print the "guptal" part only? How do I access this object values?

  • Chart/Columns labels

    I am building a Column chart I'm not sure what its called but its where you add different series together to make a column chart (this option is second from the top and on the left side in the charts selector). I would call it a additive column chart

  • Generl Use Question?

    Is there an advantage to opening an adjustment layer to do a levels adjustment VS just opening a background copy layer and doing a levels adjustment there?

  • I am unable to email photo to myself.  Message saying email/password combination is not recognized.  I have iOS 10.9.3 and iPhoto 9.5.1

    I am unable to email photo to myself.  Message saying email/password combination is not recognized.  I have iOS 10.9.3 and iPhoto 9.5.1