I reset my touch, it says to conect to iTunes.  But neither my computer nor my iTunes recognizes it.  Please don't send me to the help toutorials.  I have tried them and they have not worked.  What do I do now?

I reset my iTouch 2nd generation.  Now it says to connect to iTunes, but neither my computer nor my iTunes recognizes it.  Please do not send me to the help tutorials, I have tried them and they have not helped.  What do I do now?

You post says that you have WIndows 2000.  The iPod is notcompatible with Widowns 2000. Yu need at least XP with SP 3

Similar Messages

  • My ipod is not working it shows ipod is disabled but i tried everything to recover it and its still not working what do i do now

    i tried everything to disable my ipod but ti still shows ipod is disable

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • HT201210 .I have tried support options they are not working.

    I updated my i pod touch to latest ios..Now it wont install,Its stuck in restore mode.I keep getting error code 1604 have tried apple support options to fix nothing seems to work.Please Help!

    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

  • HT1911 I have reset my Apple ID & Password but I still cannot access the music I purchased using another computer, ID & PW. It keeps saying that my computer is not authorize to play the songs. I have tried everything and nothing seems to work. Help!

    I have reset my Apple ID & Password but I still cannot access the music I purchased using another computer, ID & PW. It keeps saying that my computer is not authorize to play the songs. I have tried everything and nothing seems to work. Help!

    iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup? 

  • I updated my Firefox to 5.0 and now my Kaspersky Password plug-in no longer works. Spoke with them and they do not have a compatible update yet, so I want to go back to Firefox 4.0. How do I do that?

    I love the Kaspersky Pure Password program and us it constantly! After updating my Firefox browser from 4.0 to 5.0... I found that the plug-in for my password program no longer worked!
    I emailed them and they do not have an update yet that is compatible with Firefox 5.0....
    So I need to go back to 4.0 till Kaspersky has an update because I am lost without my password program!
    Please help me.

    Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended. Firefox 3.6.18 would be the safer choice.
    Here's the process to roll back:
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
    Close Firefox 5.
    You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
    Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
    Note: I haven't actually tried this myself!

  • TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

    I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

    Try this:
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • When I open iWeb it does not "Highlight" the New site or new page options. It ahs had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.

    When I open iWeb it does not "Highlight" the New site or new page options. It has had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.

    Open iPhoto, select a couple of photos and use the Share ➙ iWeb ➙ Photo page menu option.  That has jump started iWeb for others.  I could take a couple of tries.
    If that doesn't work try the following:
    1 - delete the iWeb preference file, com.apple.iiWeb.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iWeb folder. 
    Click to view full size
    3 - launch iWeb and try again.
    OT

  • HT2731 I was ask for my secure question and they did not work. So I went into my account and tap on my secure question that I forgot my secure question. It replied back that it just sent me a email. The email never came. I did this three time. My email is

    I was ask for my secure question and they did not work. So I went into my account and tap on my secure question that I forgot my secure question. It replied back that it just sent me a email. The email never came. I did this three time. You have myy email as correct. I have check my account and it show as being correct.

    It's a really bad idea to post your email addresess - it's an invitation to spam - and I've asked the Hosts to remove them.
    This is a user-to-user forum and no-one on here can take any direct action. If your Yahoo address is not working that's something you would need to take up with Yahoo - have you checked it by sending yourself an email to it?
    Otherwise you will need to contact Support: go to https://expresslane.apple.com/ and click on 'iTunes' in the center column and then 'iTunes Store' in the right-hand column and proceed from there.

  • I have photoshop CS4 and it is not responding what do I do ?

    I have photoshop CS4 and it is not responding what do I do ?

    Nobody can tell you anything without proper system info or other technical details like the crash logs.
    Working with your Operating System’s Tools | Mylenium's Error Code Database
    Mylenium

  • After i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    I am also on my forth hard drive on the same model.
    When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
    I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
    I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

  • HT6146 my wifi and bluetooth is not working what sholud i do

    when i upadte my iphone 4 in ios 7.1.1 my wifi and bluetooth is not working
    what should i do ?? :(

    What doesn't work?
    What problem are you having?
    Remember for the iPhone to see and connect to Bluetooth devices they must be in, "Discovery Mode".

  • HT1430 When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations.  What I can do?

    In my numeric key pad I can not use the decimal dot (.) because it has a (,) and this not work with decimal calculations.  What I can do?  Help ………

    IT NOT WORK IN MEXICO.  THANKS A LOT.  BEST REGARDS.  MANUEL LOPEZ
    El 6/2/2015, a las 16:50, Apple Support Communities Updates <[email protected]> escribió:
    You received a reply
    SGIII has replied to your question. You can view the full discussion in Apple Support Communities.
    In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations.  What I can do?
    Correct Answer Helpful Answer
    Use the buttons above to tell SGIII and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
    To reply to SGIII, go to the discussion in Apple Support Communities.
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • I have a folder and 3 files stuck on my desktop.  When I drag them to the trash I am asked to enter my administrator's password.  I do this but the files and folder will not delete.  I have checked 'Get Info' on each of them and they are not locked?

    I have an empty folder and 3 .jpg files stuck on my desktop.  When I drag them to the trash I am asked to enter my administrator's password.  I do this but the files and folder will not delete.  I have checked 'Get Info' on each of them and they are not locked and I have full read & write access.  Grateful for any assistance in solving this problem.

    Back up all data.
    Triple-click anywhere in the line below to select it:
    ls -@Oaen De* | open -f -a TextEdit
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.

  • I have downloaded the latest Adobe Flash on my laptop and it is not working on safari for youtube.I have uninstalled and installed it multiply times and it still wont show me youtube videos

    I have downloaded the latest Adobe Flash on my laptop and it is not working on safari for youtube.I have uninstalled and installed it multiply times and it still wont show me youtube videos

        Enable Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.

Maybe you are looking for

  • Multiple devices with one iTunes account

    Want to use my Desk Mac as the repository of ALL iTunes items. Have a MacBook Pro & MacBook Air (to use on the go). Everything is fully backed-up. When I try to clean up my MacBooks and I delete an iTunes movie from them, will it be removed forever f

  • How do I install a new printer profile on CS4?

    Folder system has changed from CS3, and instructions I find on Web don't sync with CS4.  I'm working with an Epson R1800 and trying to get illford papers' profiles installed.  Suggestions including possible web link for me to follow would be much app

  • Single-instance MDB - jmsra

    Hello, I've got the following SAS configuration: Sun Java System Application Server Platform Edition 8.1_02 (build b06-fcs). It comes with the Sun Java(tm) System Message Queue 3 2005Q1 Sun Microsystems, Inc.; Version: 3.6 SP2-ER Bugs 6256771 - 2005-

  • Date parameter problem

    Dear All, I have created a BO with a field using the Date as datatype. A set of AS and WS is generated to perform CRUD operation. The problem is the date format is not compatible when I pass the date from GP to the WS. The GP is using the java.util.D

  • Preview locks files - cannot edit in Photoshop CS6

    Preview has locked all my image files - Even if I use the dropdown menu in the Title bar and change it to unlocked - makes no difference - I still cannot save/save as when I open an image in Photoshop CS6 - it says I  do not have permission, or someo