I reset my whole ipod in the settings and its stuck at the apple logo

I went to settings and reset the whole ipod to factory settings and its stuck at apple logo and wont turn on what do i do

Try #2 and #3 in link below.
Basic troubleshooting steps  
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Similar Messages

  • I bought an iPod touch 5th gen and its stuck on the find my iPhone screen and i do not have the password! How do i reset it to my account?

    Plz help

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • My home button and lock button are both unresponsive. and its stuck on the settings pages.

    both home button and lock button are unresponsive but if i press both at the same time i can still take a pic. but pressing them individually does nothing. and its stuck on the settings page and i can go anywhere on the settings page but nowhere else. help please??

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT4356 All my devices except my iPhone 4S can airprint.  Only the 4s tells me no airprint printers found.  I see no changes in the settings and I am on the same network.

    All my devices except my iPhone 4S can airprint.  Only the 4s tells me no airprint printers found.  I see no differences in the settings and I am on the same network as the printer.  Like I said, two iPads and an iPhone 4 airprint like a champ!

    Appreciate the suggestion and tried it, but still, no joy.  I even had another iPhone brought into the network and it found the printer, no problem.  It's just this one iPhone 4s.  Sounds like a trip to the Genius Bar for me!

  • I just jail broke my iPod and its stuck on the apple logo what should i do?

    i just jail broke my iPod and its stuck on the apple logo what should i do?

    The same thing happened to me. I assume it is stuck in an endless loop of restarting. You have to put it in connect to iTunes mode (http://www.youtube.com/watch?v=rm2D7-PCTaw) then restore your iPod. Hope it helps!

  • I have a macbook air and its stuck on the apple logo

    its o osx 10.8.4 its 126gb 13 inch screen and its stuck on the apple logo

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • Was looking at app and its stuck on the page wont move help

    can someone please help im desperate was looking at a game on the apps download and its stuck on the page cannot get it to move even tried downloading it and still wont go away

    iOS Reset -
    Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

  • I turned my iphone off to update and its stuck in the update screen!

    I turned my iphone off to update and its stuck in the update screen its been 12 hours what can I do???

    IF ios 8 is not working properly in iphone 5.,!! Then i should not update my iphone 4s to ios 8..!! If i do so that will be blast hahahah

  • Hi my friend gave me his old Iphone 1 today and its stuck in the apple boot logo. Sometimes it automatically shuts off but about a second later it comes back on. The home button and the power button seem to not be responsive. Im hoping to restore it.. Thx

    Hi my friend gave me his iphone 1 today and its stuck at the apple boot logo. Some times it automatically shuts off but about a second later is comes back on. The home button and the power button seem to not be responsive. Thanks for the help.

    You bought a used iPhone. Amazon is not an authorized supplier of iPhones, nor are any of the 3rd parties that sell iPhones there.
    You can make an appointment at the genius bar and have it looked at.
    If you are very very lucky, it is still under warranty and it wasn't opened or otherwise tampered with before you bought it. In which case, Apple will replace it under warranty.
    If it's not under warranty, they will replace it for $199.
    If it has been opened or tampered with, they won't touch it.

  • I have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable

    i have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable

    See: http://support.apple.com/kb/TS3694#USB
    However, the most likely reason is your self-repair of a device that is only factory repairable broke something. Note that Apple does not sell replacement parts, so whatever parts you used were not made by Apple's supplier and are of questionable quality.

  • My ipod wont turn on and its been on the charge for ages... Please help!!!

    When i try to turn on my ipod (Ipod photo 20GB) The logo appears and then after a few seconds the unhappy ipod picture comes up and underneath it says www.apple.com/support/ipod
    I went to the support pages and tried restoring and resetting but nothing is working when I place it on the charge (mains) the battery with the lightening bolt comes up but it cant possibly not have enough cahrge to load because I have had it charging for ages!!
    If someone can help me out here Id be extremely grateful!!

    To begin with my ipod will be on the charge and the sign of the battery with the lightening bolt at the side appears, then i try and reset which involves holding the menu and slecet button...but the logo doesnt appear the wewe battery flickers slightly then resumes as normal i.e. with the battery and the lightening bolt, that is all it does I cant get it to do anything else...

  • The screen on my Ipod touch stopped working. Its stuck on the lock screen and u can't turn it off. what should i do?

    how do i get the screen to work again? Or is my Ipod just broken?

    reset the ipod, hold both the power and lock buttons for 10 seconds after the 10 seconds stop holding the buttons. IF this didn't work restore your ipo. 10 POINTS please.

  • I was trying to update my ipod touch but the update failed now it wont sync with itunes and its stuck on the Apple logo with a empty loading bar under it can anyone please help i dont know what to do

    Someone please help

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • I removed an app on the 3gs, and now my phone is really slow, so i turned it off, and turned it on again, and its stuck with the apple logo any ideas what to do?

    ive also tried holding the home button and the sleep/wake button, it went off and came on and is still stuck on apple logo

    If after you have tried the restart method (Hold down the home button and the power button for at least 15 seconds) then I would advise doing a complete factory reset on the phone.
    Connect the phone to your computer, and once the device appears in the top right bar, click on it (It will be titled something like "Amanda's iPhone, or iPhone").
    Once you have done this, click on the back up iPhone option, (This will save whatever files on your iPhone that aren't on your computer, to your computer.)
    After this is done, click the "Restore iPhone" tab to completely reset the phone. If this option won't work, try the first method again when your phone is plugged into your computer and hold the home and power button the same time.
    Hope one of these will work for you:)

  • My ipod touch wont restore and its stuck in recovery mode

    I have an Ipod touch 2g mc model and it started having problems. it crashed often when playing games (i even restart it after installs), it restarted when i went on to the internet and got SUPER slow, so tried restoring it. it got to the point where it said "Preparing the ipod for Restore" and then it said "unkown error occurred(1603). and its been stuck in recovery mode for a long time now and i cant get it out no matter what i do. How do i leave recovery mode a different way? please respond.
    p.s. ive had multiple errors but my most recent one has been 1603. and now it keeps saying 1603.

    My Dad just fixed my problem! He used blackra1n. at first it dint work but then he saved it to documents and then put it into the Local Disk thingy, then he clicked on it, clicked the Make It Rain button, and it took like 20-30 minutes or maybe less while it was saying Running. Then finally my ipod turned back on! it didnt lose anything! like, Nothing at all was lost. so yah, that was pretty cool.

Maybe you are looking for

  • How to Find Controller class of  BSP application for particular Iview

    Hi  All, Any one please  help me  to find a Controlller class of BSP for an  I view. http://Host Name :Port No/sap/bc/gui/sap/its/wosm-cr-->this is for sap retail, My requirement  is to change some source code in that particular iview. i goine with S

  • Retain Same Connection = True - Property Set up for Connection Manager in SSIS 2012- Please help!

    Hi,     I have a solution with 20 packages.  Target Database is same for all the packages, only target tables are different. All are working fine. Now,as part of a new requirement,I have to change some logic in one of the packages.I have to create fe

  • How to check if document is still open

    I have the following problem with Adobe Acrobat Standard 9: I have a Java Applet that uses Adobe Acrobat to present documents to the user. The user is able to edit and save the document. When the user closes the document the document is stored in a d

  • CS4: timing problem

    Hello I have CS4 for couple of years and never had any problems. Now I try to make a project compiling 2 AVI (divx) files. Both import well, but when i start preview, one of them works as usual, and the second shows video approx. 10 times slower (i.e

  • Sqlldr: hard returns in data

    Any idea how I sqlldr to skip over hard returns without removing them from the data? Thanks,