I resetted my ipod touch and it doesent want to load again, i resetted my ipod touch and it doesent want to load again
please some one help i resetted my ipod touch dosent want to load again
Apple will exchange your iPod for a refurbished one for $99. They do not fix yours.
Apple - iPod Repair price
Similar Messages
-
The screen on my ipod touch is stuck zoomed in. I don't know how it happened I just looked down and it was like that. I have turned it off and back and even reset it but it still keeps zooming back in each time I turn it on. I can't unlock it because I can't see the numbers and it won't let me move around the screen. Please help.
This is asked and answered often. The foru search bar is on the right side of this page.
It is also covered in the manual - zoom feature:
iPod touch User Guide (For iOS 4.3 Software)
Double tap with three fingers. -
I have an older 8GB black iPod Touch (no bluetooth) no longer supported by tech. It is "locked" in restore mode. When I do a 2 button reset I can get the Apple logo but then it pops back to the synch cord-and-music disc icon indicative of restore. Any advice?
Hello honeycrisp70,
For that error, check out the article below for additional troubleshooting to get it sorted out. If it continues then you may need to contact Apple support.
Resolve iOS update and restore errors
http://support.apple.com/en-us/TS3694
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Regards,
-Norm G. -
my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
ThanksIf you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
I fell down the stairs the other day and busted my other ipod to the gamewerks near my house. the guy said he couldnt fix that ipod so he gave me a new one.. a better one a 32GB, the broken one was 8GB. but he told me the only bad thing is that the camera does not work and he doesnt know why... he just couldnt get it to workkk... any ideas on whats wrong?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
I have an old iphone 3G that I want to use as an ipod touch. It does have a sim card in it and it has been reset. For some reason it will not pick up my wireless network in my house, or any other wireless network. What could be the problem?
Is this the problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim -
I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it from system registry. My system is Windows 7 64bit.
UPDATE: The true error is : '
"itunes was unable to load data class information from sync services"
Any of the topics didnt work.
Sync on my wife's laptop works. -
I downloaded a movie on my Ipod touch useing my Ipod touch and I guess I was rushing through the download prosess that it glitched up but I would like to fix it without reseting it. I can see the movie in my videos but it is not in my purchases and now I cant even view it it says I dont have permmision to access it and it wont let me delete it by sliding my finger accross it. Help
Movies are not one of the items you can reload via iClould like apps, music, and some other items. You can contact iTunes and request a redownload,. They may give you one.
How to report an issue with Your iTunes Store purchase -
if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
and i hope you understand my problem..
i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
-sierraHey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.
-
My dad gave me an iPhone 3G to use as an ipod touch but it's not picking up wifi. ive tried everything to like reseting the network settings turning wi fi off and on mutable times, turned the phone off on and on. What do i do?
the iphone never really picked up wi fi when it was used as a phone and it didnt really matter because he had unlimited internet but it still wont go on wi fi. does any one know why it is doing this?
The iphone works fine other wise i just really want it to go on wi fi. We just got new wi fi too and all of our other apple products go on the wi fi just fine. I dont know if its because its newer or what but my brothers 1st gen ipod goes on wi fi just fine.
The iphone is updated to the latest ios too
WHAT SHOULD I DO!!!!!!!!!!!???????This might help
http://support.apple.com/kb/ht3406 -
How do I "reset" calendars and contacts on iPod Touch 2G
I need to know how to erase and/or reset all contacts and calendars on my ipod Touch. Initially I synced with my mobileme account. When one of my contacts did not sync properly, however, I set iTunes to sync with calendars and contacts. Now I have duplicate contact and calendar entries on my Touch. I want to erase/reset all calendars and contacts on my Touch, and then sync them again and in the future via mobileme. Please help. Thanks!
Ah, I see what you did. However I think my problem is a little bit different. I have my "mobile.me" contact file (which syncs just fine), PLUS I have an "on my iPod touch" contact file. I'd like to delete the "on my iPod" set of info and retain the Apple (me.com) info.
Any suggestions would be welcome. -
My wife gave me her older ipad. I have reset and removed all data. My Apple ID (Ipod touch) is not an email adress, but when I try to stu up the ipad it asks for my Apple ID, then tells me that for security reasons the Apple ID must be in email format?
Change it to an email address.
-> https://appleid.apple.com/
Maybe you are looking for
-
Disk File Sharing Switching from with base station password to with account
Ok, here's the situation. I have an external hard drive, with multiple partitions, connected to an AirPort Extreme (802.11n) and it is currently protected using the "With Base Station Password" option. I would like to switch that to the "With Account
-
Report Designer drill down issue
Hi Friends, I am having an issue with report designer.When i run the report designer the characteristics are getting displayed in drill down form for each row of values.Is there any way to restrict this. i want to display the header part in tabular v
-
Installing JRE6_10 on linux
i have downloaded Java SE Development Kit (JDK) 6 Update 10 and installed it on my centos 5 box fine. i then compiled a simple application and tried to run when i received this error Exception in thread "main" java.lang.ClassFormatError: day (unrecog
-
Message "no administrator found"
Hello All, i am getting message in my inbox ( SBWP) <b>"no administrator found"</b>. work item i am accessing is in READY status with me there are 2 more users which are assigned to the position. when i click on the work item in my inbox i get this
-
Hi Guyz, I am actually adding a cube to an existing multiprovider in DEV. Can somebody tell me the steps how to do the transport to QA from DEV?