I restarted my I phone while updating the Ios6 ans the apple sign keep appearing and disappearing?

You likely corrupted the iPod by interrupting the update process. Try connecting to iTunes and restoring it there. If iTunes does not recognize the device, try connecting it in recovery mode using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock

Similar Messages

The apple sign keeps flashing and im getting an error message

i put my phone on charge for 20 minutes and when i returned the phone was rebooting but only showing the apple sign then starting over. there is an error message that keeps appering on the top of the screen. sometimes for upto 1min and sometimes in different colours. when it comes up in blue there is also a blue line going across the screen
the error message is:
nand sftl_read_cb:122 sftl: error clean lba 381033 vba: 0x6d629 status0x0
it has been 3hours i have tried a sof reset, switching the phone off and it will not connect to itunes. an advisor in the apple store said she had never seen that before, neither did 3 other collegues. they do not have appoinments untill next week. help please

Hi Tatilopez86,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

So i was updating my white ipod touch 4th gen and i restarted the ipod while it was half way done. Then after it restarted it would crash right after the apple sign...it would turn white, red,purple,green...any ideas of how to fix it??

So i was updating my white ipod touch 4th gen and i restarted the ipod while it was half way done. Then after it restarted it would crash right after the apple sign...it would turn white, red,purple,green...any ideas of how to fix it??

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
When it says restore the iPid via recovery mode, try placing n recovery mode and restoring several times.

HT4623 Tried to update my iPhone 4 this morning and it's frozen. When I turn it off and on again I just get the apple sign fading in and out and cannot use the phone

Can anyone help. I tried to update my iPhone 4 this morning and it just got half way through the update and froze. I managed to turn it off eventually, but now all it will do is show the apple sign fading in and out and is un usable. It's not even being recognised as plugged into the laptop!!!!!!!

Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

When my macbook asks for update the apple id is incorrect and doesn't allow me to modify it

when my macbook asks for update the apple ID is incorrect and doesnt allow me to modify it. what can i do

Is this a second hand Mac?
Have you tried signing out of the App Store then signing back in?
From the App Store menu bar click Store > Sign Out
Quit and relaunch the App Store then click Store > Sign In with the correct Apple ID.

My phone isnt switching on, when i have charger in the apple sign keeps flashing

my phone isnt switching on, when i have charger in the apple sign keeps flashing, please help

Hi robert160780!
I have an article here for you that can help you troubleshoot that issue. That article gives suggestions on a multitude of issues, but I will highlight your issue after the link:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Specifically, I believe this part of the article will be the most helpful to you:
l
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode.
Thanks for using the Apple Support Communities!
Cheers,
Braden

My Mac won't fully start up.. I push the power button, the apple sign pops up and the loading circle and then a bar loading and as soon as the bar is done loading the computer cuts off again. It's like it attempts to start up like it's updating something

My Mac won't fully start up.. I push the power button, the apple sign pops up and the loading circle and then a bar loading and as soon as the bar is done loading the computer cuts off again. It's like it attempts to start up like it's updating something and then after the bar is full, it shuts off. Please help

Hpullen wrote:
A1278 and I'm not sure about the OSX
http://support.apple.com/kb/HT4132 How to identify MacBook Pro models
http://support.apple.com/kb/HT1159 Mac OS X versions (builds) for computers

Mac Book Pro on boot up, the apple sign will appear with the spinning wheel. After some time, a grey screen wil appear with a movable mouse, but will not boot up. Help!

Mac Book Pro on boot up, the apple sign will appear with the spinning wheel. After a period of time the screen will turn grey, but the mouse will still operate, but not boot up.

If it was purchased brand new then it's running a version of Lion, so to reinstall Lion:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.

How can I use the button in one panel to control the other panel's appearing and disappearing?

How can I use the button in one panel to control the other panel's
appearing and disappearing? What I want is when I push the button on
one button . another panel appears to display something and when I
push it again, that the second panel disappears.

> How can I use the button in one panel to control the other panel's
> appearing and disappearing? What I want is when I push the button on
> one button . another panel appears to display something and when I
> push it again, that the second panel disappears.
>
You want to use a combination of three features, a button on the panel,
code to notice value changes using either polling in a state machine of
some sort or an event structure, and a VI Server property node to set
the Visible property of the VI being opened and closed.
The button exists on the controlling panel. The code to notice value
changes is probably on the controlling panel's diagram, and this diagram
sets the Visible property node of a VI class property node to FALSE or
TRUE to show or
hide the panel. To get the VI reference to wire to the
property node, you probably want to use the Open VI Reference node with
the VI name.
Greg McKaskle

HT1438 I did a master reset on my iphone4 the apple sign poped up and now for the last hour there is just a spinning icon as if something's loading

I did a master reset on my iphone4 the apple sign poped up and now for the last hour there is just a spinning icon as if something's loading helpp

DFU Mode Restore
Open iTunes on computer. Connect iPhone to computer with USB Cable. Then hold both home and power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode. Usually about 20 seconds of holding Home button. If the screen is black this is DFU Mode. Then click Restore button of iTunes.

My iphone 4 died even though it had plenty of battery, and shows no sign of life until i put it on to charge where it shows the apple sign every now and then but just turns off again after a few seconds.....HELP!!!!

my iphone 4 died even though it had plenty of battery, and shows no sign of life until i put it on to charge where it shows the apple sign every now and then but just turns off again after a few seconds.....HELP!!!!

Could be a defective battery, you should get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
Find an Apple Authorized Service Provider

Hello, my iphone 4 has just stopped working it has gone blank..i plugged it into my laptop and it the apple sign keeps flashing it wont connect to itunes either :/ HELP!!!

hello, my iphone 4 has just stopped working it has gone blank..i plugged it into my laptop and it the apple sign keeps flashing it wont connect to itunes either :/ HELP!!!

Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808

HT4061 my phone wont turn on so i cant getbthe seriel number, even when i plug it in the computer the apple sign pops up and goes in and out..

my phone wont turn on anymore, at first it was just shutting down for no reason but still coming on but today the phone wont come back on,now the apple sign is on screen and going in and out. what should i do to fix this problem

If you've tried the basic troubleshooting steps (restart, reset, restore from backup, restore as new), and you've tried charging from a wall socket and these all fail, then you have a hardware problem.
If your unit is still in warranty, you will be eligible for a replacement with a refurbished unit free of charge. If you are out of your warranty period, you will be eligible for an out of warranty exchange which will cost the equivalent of 200 US dollars.

My iPhone 4 randomly turnt off and will not turn on but if I plug it into a charger the apple sign still appears?

MY iPhone 4 turned off and won't turn on but I've connected it to a lead and the apple sign appears

Hi Harryharcup10,
Welcome to the Apple Support Communities!
I understand that your iPhone is not turning on as you would expect. In this situation there are a couple of different articles that I would suggest reading over.
First, I would suggest working through the troubleshooting steps in the following attached article to help resolve the issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
If the issue continues, please use the information in the next attached article to continue the troubleshooting process.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Best regards,
Joe

Please Dashboard app. is not stable on the screen. It appears and Disappears randomly on the screen. Disabling it would solve my problem but I still need it. What should i do? help me guys

Dashboard.app is giving me problems. it appears and disappears at will. I don't wan to disable it too. Help me out please

Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore

I restarted my I phone while updating the Ios6 ans the apple sign keep appearing and disappearing?

Similar Messages

Maybe you are looking for