I restarted my iPad but it is just stuck on the apple logo. Please help
I restarted my iPad, but it is stuck on the apple logo. Please help.
If a reset doesn't work, you will have to try and force the iPad into Recovery Mode (data will be lost)
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad
Similar Messages
-
HT201412 my phone restore but does not starts it shows only apple logo please help me
HI
My i phone restore but does not start it shows only apple logo & charging it was not connect to i tune please help meSee your other post on this Topic...
https://discussions.apple.com/message/22315227#22315227 -
It's just freeze........................
I have had my IPad 2 weeks. I plugged it in to charge it and it went off and wouldn't come back on. I tried holding down the sleep and home buttons at the same time and after a minute, I got a picture of the the cord with an arrow above it pointing to the itunes logo. I logged on to itunes and plugged the IPad into my computer. ITunes said it was going to reload the software but it couldn't I tried four times and it failed each time. I called Apple and after 45 minutes, the gave me a return number to send it back UPS. I thought Apple made better products tyhan this. If I had known what I know now I wouldn't have bought it. If I could get my money back, I would. (No returns after being opened!!!!!!!!!!!) I won't be buying anything else from Apple!
-
Is there still a remedy for my hone that's stuck on the Apple logo every time I reboot. I can no longer get back to installing iOS6 again. Upon checking itunes, it said that there was an error in the download. I need help!
I have the same problem with iPhone 3GS, it wont connect to cell data after update to iOS 6.
everytime i want to connect to internet with any apps on my iPhone, i have to connect from a Wifi first.
this is frustating...
are there any solution for this? -
My phone wont turn on, its just stuck showing the apple logo and wont turn on
today i bought a brand new iphone 4 and i wasnt recieving a signal as my sim card hadnt updated yet so i tried to restard my iphone to see if that was the problem and instead of turning on it has stayed on the apple screen at the start!!!!
Brunolucy wrote:
One day my Iphone would not turn back on after I turned it off, now it is stuck with the apple logo on it. Also I have tried plugging it into 3 different computers now, and Itunes will not recognize it. Please help.
Try this:
http://www.youtube.com/watch?v=fiTcKMZfyfk -
I am trying to restore my iphone but it has been stuck at the apple logo with the progress bar and it shows no signs of loading at all. What should I do?
Hello kuukua.b,
Thanks for using Apple Support Communities.
Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Take care,
Alex H. -
Can someone help? my ipad is stuck on the apple logo!
my ipad wont turn on. its stuck on the apple logo. i already tried to hold down the power button and the home button a million times but it wont work. itunes wont recognize my ipad when i plug it in. I DONT KNOW WHAT TO DO!!!!!! my ipad is jailbroken and it wont do anything. HELP!!!!!!
If your iPad is jailbroken then you'll need to get help elsewhere e.g. the people you got the jailbreak from - jailbroken devices aren't supported here.
-
I turned off my ipod touch but it wont turn back on its stuck on the apple logo
i turned off my ipod while there were apps dowloading. but its taking a long time to turn back on its just stuck on the apple logo what do i do or do i wait?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!
Jai141 wrote:
... and im not sure as i brought the phone of someone else.. i will have to ask them
Good Luck.
Jai141 wrote:
Thanks
You're Welcome. -
Hi, I'm having trouble with my Ipad 2. I was recently playing a game and my ipad just shut off on me. Then when I turned it back on it was stuck on the Apple Logo and it won't go to the home screen at all. I plugged it in my itunes but I don't know what to do from there. I left it charged hoping the apple logo would dissappear but it didn't and now for some reason the battery is always dead. I really need help. Does anybody have any suggestions? Please.
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
my ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that
Have you tried a reset first? If it works, you won't have to go through the restore process.
Hold down the sleep (upper right hand top) and the home button at the same time. A slider will appear. Ignore it and keep holding down the buttons. The Apple logo shoud appear. Then your ipad might work again. It takes a good 15 seconds. You will not lose anything on your ipad.
If you try it a couple of times and it doesn't work, you might have to go through the restore process as has been suggested above. But follow the steps so you don't lose your data.
Hope this helps. -
My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response. Any ideas as to what may be wrong and what I can do?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPad fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?
Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414
-
My MBA now just goes to the apple logo on the grey screen but no further
My MBA now just goes to the apple logo on the grey screen but no further... I did some updates on Office but it did not freeze on install and recently I installed Joost.
I thought about booting it from a disc but now I have a disk stuck in my MAB superdrive that I can't get out since at this stage it will not eject... it is a mess...
I am new to Mac, so I am lost...
Anybody can help me with tips ?Installed Acrobat Reader for Mac. Rebooted and get apple logo, grey screen and perpetual blue screen, no further. I have dual systems installed and can boot Windows XP Pro with no problem so it appears to be a Mac OS problem, not hardware. Awaiting help.
_*WARNING to others who may have same problem installing Adobe Acrobat Reader and Office updates (see germmac post).*_ -
My iPhone 3G 16gb in white: I did all the things you mentioned, but it just keep looping the Apple logo and doesn't turn off until it is out of battery, and I am using a MacBook Pro 15inch Unibody if that does matter
If you are in Hong Kong, go to Digital Trade, 1/F, Sincere Plaza, Argyle Street, and it will cost you 120-150HKD, but before you go check that your power button and home button are working correctly, if not press as hard as you can, hope this will help.
Maybe you are looking for
-
Ssrs 2008 r2 use parameters for sorting purposes
In an ssrs 2008 r2 report, I have a report where a user wants to sort a report based upon the following parameters: 1. lastName, 2. firstName, 3. studentNumber, 4. [School Name]. The above is the default order of how the user wants to be
-
Manually edit volume of MIDI file in Java
Hey all, I'm trying to find a way to manually change the volume (velocity) of a midi file before playback, i.e. directly in the code. This is the code I'm using to play my midi files: import javax.sound.midi.*; import java.io.*; /** Plays a midi file
-
Had a hard drive failure during a synch on my Dell laptop. Re-installed a new hard drive and programs and started synch again. Step 2, the back up, has been running for nearly 4 hours now. It's a 4S 64gb and almost full. Any ideas as to how much long
-
Intermittent screen flash in dual monitor mode?
I've developed an interesting problem - A few months back there existed some fault with kde's treatment of the xf86-video-ati drivers which meant that, if you had compositing enabled, it would randomly segfault and die. This was slightly irritating.
-
1080i footage played in Viewer only displays field 1
I'm using an iMac without an external monitor. I have 1080i footage. I can jog forward a field at a time and see both fields individually in the viewer. But when played real time, my iMac only displays field 1. Same thing if I play it back full s