I restored my iPad and then repurchased App Pages. But I am not able to find my data saved with Pages before the restore. qwn

I restored my iPad and then repurchased App Pages. But I am not able to find my data saved with Pages before the restore. qwn

Those sites take a long time to load for me (almost a minute)
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Similar Messages

  • TS3681 I restored my iPad and then i clicked "Restore iTunes backup". It is finished but on the iPad screen it says connect to iTunes. I connected it to iTunes but it says the same thing. What should I do?

    I restored my iPad and then i clicked "Restore iTunes backup". It is finished but on the iPad screen it says connect to iTunes. I connected it to iTunes but it says the same thing. What should I do?

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port. (Make sure you have the latest version of iTune on your computer)
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • I am not able to find folder my photo stream, how can i restore it

    hi ,
         I am using 5s mobile of storage capacity 32gb , and currently using IOS 8.1 version. my problem is I am not able to find out my photo stream folder in photos after I start using I cloud photo library. if any one can help me out to restore that folder it will be great..
    Akhil

    You can't (only) de-authorise computers you no longer have access to.
    Your only option is to de-authorise all your computers and then re-authorise those you wish to be authorised. You can do this by logging into your account settings in iTunes on your computer (Store > View My ID) and selecting the option to de-authorise all.
    Please note however, you are only permitted to do this once in each 12 month period, therefore you would be better de-authorising your computers before you lose access to them. you can do this from the 'Store' menu in iTunes.

  • I just restored my IPad and now no apps are re-downloading

    After having some trouble with updating i had to restore my IPad. However now, when i am trying to download my apps again, it gives me the cloud icon and when i tap it, it just spins then goes back to the cloud. I've also tried downloading new apps but the same sort of thing happens.
    Thanks
    Message was edited by: JelliedPineapples
    Problem somehow managed to fix itself. Very odd.

    have you tried a different usb port? for the **** of it try restarting the computer as well

  • I get a weekly email with a PDF attachment and when I open it it's to large to print. To date I'm not able to find a way to shrink or adjust the size. The doc was created on M/S Office-excell

    I get a weekly email with a PDF attachment and when I open it it's to large to print and I know of no way to shrink or resize the doc. It's created in M/S excel. Can anymore assist....TX

    From: Test Screen Name [email protected]
    Sent: Sunday, August 04, 2013 11:32 AM
    To: gunner0490
    Subject: I'm not able to open PDF files in Adobe Reader XI.
    Re: I'm not able to open PDF files in Adobe Reader XI.
    created by Test Screen Name <http://forums.adobe.com/people/TestScreenName>  in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198

  • I have a ipad mini my daughter has ipad2 but we are not able to facetime eachother

    i have an ipad mini my daughter has an ipad2 we are trying to facetime eachother but cannot do it all the email addresses are associated with me what do i have to do so we can factime do i set up another email account from my computer for her to use or can the email addresses that i have be used

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • I have to save data coming at the rate of 50 ms.i am trying to store the data in an array.from this array, i have take last 60 minutes of data and store in excel. But i am not able to build array to hold the incoming data.

    data comes at the rate of 50 ms. So this data has to be stored in a temprorary location say array or circular buffer.After 60 minutes, the new data should append at the last value and the first value should be deleted. Please help.

    First thing I would do is search the examples, there are a couple seamless acquisition examples that ship with LV that should do the trick for you. Working in your favor is the fact that you aren't needing to sample incredibly fast, or collect a huge amount of data.
    However, typically managing arrays in LV isn't very hard. What specific troubles are you having?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • I'm trying to fix my Mail's "Offline" problem with the exclamation mark inside. And i'm trying to get into the "Mail, Contacts, Calendars" under the Preferences but I'm NOT able to find it. Help!?

    This just started to happen recently,when I try to look at my email accounts (gmail and yahoo) on my itouch, they won't fetch the most recent emails. I'll press the refresh button, and it'll say latest update was in JUNE. I tried lookin up my emails yesterday. I have no idea what's going on.

    update directly, Product updates

  • Despite having AIR3.0 and FlashPlayer 10.1 installed on android emulator,  not able to show a SWF

    a) I tried to view a SWF in a HTML file using  WebView. I see a message asking to get Flash Player. Somehow, the emulator is not able to find Flash Player it is installed in the emulator.
        BTW I am using Android SDK 2.3
    b) I create a mobile app using Flex 4.5.1 and installed the apk on android. The app has one view that shows SWF in a local HTM file using StageWebView. I was able to test the app using Flex's emulator.
       But in the android emulator, when I get to the view that shows the local HTML file - it asks for FlashPlayer to be installed.
    Any leads??  

    It seems Flash player does not work Android Emulator. We can test it only on actual devices
    Found it in this link
    http://groups.google.com/group/android-developers/browse_thread/thread/ad607b175e881df5

  • We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation approvers and controllers got migrated but we are not able to map new mitigation approver and controller to the mitigation ids.

    Hello All,
    We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation
    approvers and controllers got migrated but we are not able to map new
    mitigation approver and controller to the mitigation ids.
    The steps we have done below.
    1. We have created user id in su01 with necessary authorizations
    2. we have declared this user id in Access control owners as a
        mitigation approver and assigned to the organization unit
    Now we are trying to map to newly created mitigation approver to the
    mitigation id but we are not able to find that approver id for the mitigation ids. (only old mitigation ids came from VIRSA only we are able to see, not able to add new mitigation approvers / controllers to the mitigation ids)
    Kindly check this issue, this is very critical for us.
    Thanks in advance.
    Regards,
    Karunakar

    Hi Karunakar,
    - Assign Owners to Organization unit
    - Make these owners as Mitigation Approver and Monitor
    - Create Mitigation Id in this Org. unit
    Regards
    plaban

  • I just purshased AirPort Extreme 802.11n wi-fi  I was told to get the step by step direction on the internet and I am not able to find it can you help me

    I just purchased AirPort Extreme 802.11n wi-fi  I was told to get a step by step direction to install this wi-fi on line but I am not able to find it.  can you please help me?
    Helen

    See this Apple video tutorial.
    http://www.apple.com/findouthow/mac/#wirelesssetup
    And this Apple doc:
    http://manuals.info.apple.com/en_US/airport_extreme_5th_gen_setup.pdf

  • After iPad ios 5 upgrade, itunes "interrupted while restoring" restore gets error -50. iPad starts in 'configure' mode - can I configure as 'New iPad' and then restore?

    After iPad ios 5 upgrade on Win7 64bit pc (x386 iTunes), iTunes gave me error "iTunes was interrupted while restoring, restore again now?" I try to restore but iTunes immediately gives error -50. Apple website says -50 is a timeout, but I have tried all fixes: changed usb ports, new cable, reset iPad, restart pc, remove sim... no good.
    iPad starts in 'configure' mode, but won't restore from any of the several iTunes backups I have. Ready to giveup on 'restore'! iPad is sync'ed in iTunes, connects and syncs ok, so I don't want to lose that info.
    Can someone from Apple advise - can I 'configure' as 'New iPad' and then restore or sync to recover my Apps and data etc? OR if I 'Restore' from iTunes 'Summary' tab, will I still be able to Sync to restore the iPad Apps and data?
    I'm seeing a lot of frustrated Apple users online, hoping that a fix for this problem will help a few of us!! An iOS upgrade should not cause this much pain and wasted effort.

    You might already have tried all of these, but just in case:
    1. Make sure you have the latest version of iTunes.
    2. If you're on a Windows PC, consider uninstalling iTunes and Quicktime, restarting the PC, then reinstalling. This sometimes fixes oddities.
    3. Make sure you have no firewall or anti-virus running/active.
    4. Try different USB cable; if you're using a cable via a hub, try connecting without the hub. On desktop PCs, the direct (non-internal-hub) USB sockets are usually at the back.
    5. If yoiu haven't already done so, download the iOS5 update via the direct links I posted above
    6. If using Update doesn't work, use Restore. Option-click (Mac) or Shift-Click (Windows) the Restore button in itunes.
    7. Before you to the Restore, right-lick the entry for your device in iTunes and choose Backup from the drop-down menu. You may need this backup later.
    If you're srtuck in recovery mode:
    - There are some tips here for Windows users
    http://thehowto.wikidot.com/ipad-stuck-recovery-mode
    - If your device is stuck in Recovery mode, you can try putting it into DFU mode, from which iTunes should be able to Restore, as above. Details here:
    http://www.tipb.com/2010/12/02/tip-put-iphone-ipad-dfu-mode/
    - This link points to a utility that can help (Windows and Mac)
    http://runningblind.com/post/2800674985/ipad-stuck-in-recovery-mode-for-no-reaso n
    I hope something here helps

  • My iPad is suddenly not loading any apps.  When I click on an app, the screen flickers to black and then back to normal, but will not load the app.  This is ALL the apps, not just one.  Have tried rebooting, to no avail.

    My iPad is suddenly not loading any apps.  When I click on an app, the screen flickers to black and then back to normal, but will not load the app.  This is ALL the apps, not just one.  Have tried rebooting, to no avail.

    Was a Restore one of the things tried.?  [Attach the iPad to your computer and in iTunes click on your device. On the Summary page click on Restore and go through the process. Be sure to click YES to Restore from a previous backup.]

  • I recently updated my ipad and then  I connected with my computer forn sync, not realising that I had a new version of itunes with none of my apps. Now I have lost allof the apps and books etc, that I had prurchased. How do I get them back?

    I recently updated my ipad and then  I connected with my computer for sync, not realising that I had a new version of itunes with none of my apps. Now I have lost all of the apps and books etc, that I had prurchased. How do I get them back?

    As long as the apps and ibooks are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519

  • I need to save an online file to my ipad and then email it as an attachment from my school email? It is my college gmail account and I can't add it to my mail app.

    I need to save an online file to my ipad and then email it as an attachment from my school email? It is my college gmail account and I can't add it to my mail app. This was an assignment for class to make sure we could use the BB email system.

    You can use your gmail account within the native Mail app using IMAP
    Make sure you've enabled IMAP in your main Gmail settings
    Open the Settings app on your device
    Tap Mail, Contacts, Calendars
    Tap Add Account...
    Tap Gmail
    Enter your account information, being sure to use your full Gmail address, including '@gmail.com'
    Tap Next
    Tap Save

Maybe you are looking for

  • IPod Touch won't connect or charge AT ALL.

    I can't connect my iPod touch to ANY computer AT ALL. This includes Windows Xp, Vista and an iMac with Leopard. They are all running iTunes 7.6.2. I have tried all protocols I've come by so far none have worked. The iPod simply won't connect. The iPo

  • Linking DMS DIR to Service entry sheet

    Hello Experts, I need to link DMS DIR to Servise entry sheet(ML81N). As there is no standard SAP object(ESSR) I need to achieve this by Development. I found out the procedure for development as below which I could not understand properly. Object link

  • Speaker Docks 100% Compatible With iPhone 3G?

    Are there ANY speaker docks that are truly 100% compatible with the iPhone 3G? Speaker docks that will charge the iPhone 3G WITHOUT a USB connection, won't keep offering to put the iPhone 3G in Airplane mode, and will play music without any interfere

  • How to set up Query Logging in OBIEE 11g 11.1.1.6

    Hi all, I couldn't find the option for setting up the query logging for testing and debugging purpose. Could anyone plz help me in this ... Regards, Arun

  • Need Information on ROWID

    Hi All, I am using Oracle 9i eneterprise edition. I have a question on ROWID to use it against a partitioned table. I am creating a new table with ROWIDS for the records that are to be updated in a partitioned table in the below query. CREATE TABLE p