I restored my macbook and now my ipod isn't recognized by itunes

I restored my macbook and now my ipod classic isn't recognized by Itunes... Help

Have you worked through each and every single suggestion in this Apple support document yet?  If not it would be a good place to start.
iPod not recognized in iTunes and Mac desktop
B-rock

Similar Messages

  • While updating my Ipod to ios 5 an unexpcted error occured and now my ipod is not recognized by itunes or my computer and all data has been removed. What can I do

    While updating my Ipod to ios 5 an unexpected arror occured before my data was restored and now Itunes will not recognise my Ipod. My Ipod is also not seen as a device in My Computer but asks me to install drivers. What can I do?

    - First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    - Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next try DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Next try another computer/cable to help determine if you have a computer or iPod problem.
    - If the other computer works and yours does not see:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • My Music Video isn't working, and now my Ipod isn't recognized

    Last night I tried to play a video that I purchased from iTunes and my Ipod froze for about a minute and then went back to the list of videos (screen). Today I tried to plug it in to my computer to see if I would experience the same thing in iTunes, and a message comes up saying that "the USB device is not recognized". I uninstalled both the iPod Software and the iTunes software, and then reinstalled them both from the apple site (for the latest versions). My iPod is still not recognized but for some reason it Now charges (nothing happened before).
    I've restarted my computer a few times, and restarted the iPod serveral times also.
    Other videos work fine, just not my music video (and now not my iPod).
    Is there anything I can do short of erasing all my songs and re-starting from scratch?
    Please, anybody?

    Does anybody at least know why my music video isn't working? I have other videos on the iPod and they work perfectly.

  • Updated itunes to 11.14 and now my ipod cannot be recognized by itunes

    I updated my itunes to the latest version. I have an old iTouch. 2nd generation itouch and now it cant be recognized by itunes. Like it wont appear there. But it's being recognized by my computer. Someone help please

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests

  • Installed the new iTunes 11.1.4.62 and now my iPod is not recognized by iTunes

    Seems to be lots of people on here with the same issue. It would be nice if Apple were to advise users of iTunes that there is an issue with iPod syncing so we all don't run around wasting our time. Looks to me like in Device Manager under portable devices the ipod is no longer using the (usbaaple.inf or usbaaple64.inf) apple driver but the older Microsoft device driver. My old one was deleted by the iTunes update and replaced with the Microsoft one. HOW ABOUT SOME HELP APPLE!!!!

    Hi All,
    I tried to download the update and iTunes doesn't work at all! It won't even open. I have tried all of the steps above but still no joy.
    Any help would be much appreciated as I have been on this for one week already.
    Close to my wits end and moving back to a Sony and trying Android for the very first time.
    Thanks in advance.
    Regards
    Darren

  • IPod isn't recognized by iTunes and iTunes opens very slow!!

    Hey!
    So here's my very urgent problem (go on vacation tomorrow!!!):
    Everytime I click to open iTunes, it takes about 5 minutes until it opens! I have a Windows XP and have also updated iTunes to the newest software. I don't know what the problem is...
    And second, my iPod doesn't connect with iTunes, it won't be recognized by iTunes! Windows recognizes it, but iTunes doesn't. I've already tried at every USB connection, but it doesn't work! Well, once it worked and I thought that was it, but the next time it didn't work anymore!
    I've got a pink iPod mini (4 GB) and I dropped it some times, but the man in the Apple Support store said, it's got nothing to do with the hardware. Really?
    Who can help me please - very fast??!
    Thank you!
    Chrissy

    Sorry, don't real understand! ;-))
    OK, I closed all other background applications when using iTunes. But the problem is that I couldn't do the next step because iTunes always tell me: "The software required for communicating with the iPod isn't installed correctly. Please reinstall..." So I can't drag the iPod icon from my computer (and anyway: where is "my computer"??) to iTunes application (where is that one??)
    But at least it's good news that nothing's wrong with the hardware (couldn't afford a new one! ;-))
    Please reply soon, it would be real cool if you'd help me with further steps... and everyone else too of course! ;-D
    Chrissy

  • Downloaded the latest update and now my iphone is not recognized in itunes

    I downloaded the latest update on my computer for Itunes and now my Iphone is not recognized when I plug it into the computer or open Itunes>

    Device not detected in iTunes for Windows

  • HT1353 2nd gen iPod isn't recognized by iTunes nor Windows - What to do?

    I have an iPod A 1019 (2nd gen?). When I connect it to the firewire connector on my PC, the unit screen shows a checkmark and "OK to disconnect." I tried to reset with Menu + Select (=nothing happened) but Menu + Play works. Still, PC + iTunes won't recognize iPod. Help? I suspect that the software on the iPod itself is too old but since the device cannot be discovered, I can't update it. I tried iPod transfer software, but nothing recognizes my oldie. Sigh.

    Hi, Griff W.!
    Thanks for taking the time to offer me the troubleshooting steps. I tried them all, but unfortunately to no avail. I can listen to the iPod, but once I connect it to my PC with the firewire cable, it still isn't recognized in iTunes or in Windows. I checked the Universal Serial Bus controllers. The iPod is nowhere to be seen. I checked the version of the software on the iPod and it's 1.5. Maybe that's the problem: the software is too old?
    BTW, the firewire cable is charging the iPod.
    Maybe if I could find someone with an old PC that has a firewire port?  But even if I were to make the iPod visible, would I be able to copy the songs onto my new iPod? From what I've been reading probably not. It's really exasperating. They music is legit, copied from my CDs or purchased.
    I am looking at my new superslim iPod Touch 5th generation and right next to it the clickwheel iPod 2nd generation that's more than a cigarette pack sized. Progress. I guess.
    Thanks for helping out. If you have any more ideas, please let me know.
    Best regards,
    D.

  • My 5th generation iPOD isn't recognized by iTunes?

    When I plug my iPod into my computer, iTunes opens, but my iPod isn't recognized. Anyone else have this problem or any suggestions?

    By all of those suggestions, do you mean the ones I mentioned in the paragraph about or the ones in the support article I linked? Does this 5G iPod via still power on?  DId you try connecting it to another PC or Mac to see if it is recognized there?  Did you check the dock connector for any signs of debris or damage to the pins that could be preventing a connection to your PC?
    Any idea how long the average iPod should last? Ours if from 2006.
    Most people never get the iPod to last 6 years, so consider yourself lucky. That's quite a time span!
    B-rock

  • I was updating my iPod touch to 4.2.5 when an error occurred and now my iPod is not recognized by my computer or under devices in iTunes.  My iPod is also stuck on a screen saying to connect to iTunes.  I tried resetting my iPod and it did not work.

    Please help!  I was updating my iPod to 4.2.5 and iTunes said that it was preparing my iPod for update.  Then an error popped up and now my computer won't recognize my iPod and it doesn't show up under devices in iTunes.  All it has on my iPod is a picture of a USB cable with an arrow pointing to the iTunes logo.  I tried resetting my iPod and it just restarts to the same picture.  I tried restarting my computer as well.

    What was the error number?  That would be very useful since the following gives actions for various errors.
    http://support.apple.com/kb/TS3694
    Try manually placing the iPod in recovery mode to see if that will make the iPod visible in iTunes.  See:
    http://support.apple.com/kb/HT1808

  • I downloaded the new version of iTunes and now my iPod will not open in iTunes

    I recently downloaded the new version of iTunes and not my iPod will not open in iTunes

    Hello, srg60. 
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • There was a virus on my computer. After that i redownloaded itunes and now my ipod is not syncing with itunes. What should i do?

    Please Help.
    Its serious. I cannot put songs in my ipod touch anymore.

    I suspect that now the iPod sees the computer/iTunes library as a new computer/library. Follow these instructions
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • IPod isn't recognized by iTunes and won't let Windows format it

    I have an iPod classic that won't do much of anything. It won't turn on and rarely gets past the apple logo. It it does get past the apple logo though it asks as if you just bought it and asks your language and has nothing on it. If you go into settings though it says that all of the memory it used up. It also has the games on it but if you try to play them the iPod crashes. If I plug it into the computer iTunes won't recognize and and Windows will not format it.
    I do not care about getting any of the previous data on the iPod back I just wish to use it again.

    Hi Pigwarts5ever,
    If you are having issues with your iPod Classic not being recognized by iTunes on your Windows machine, you may find the following article helpful:
    Apple Support: iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    If you are able to get it recognized, your best next step would be to restore it to factor settings:
    Apple Support: Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    Regards,
    - Brenden

  • My iPod isn't recognized by iTunes and I want to update it but I can't. What do I do?

    I plug in my iPod and it will charge but I have tried everything to get iTunes to recognize it and it won't. I want to update it to IOS 5 but I need the iTunes to connect with it.

    Have you tried here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Ipod isn't recognized by itunes and computer but it still charges

    i've tried a hard reset but that didn't do anything.
    when i plug it into my computer i get a message saying that the USB device isn't recognized.
    so, when i look at it in device manager the ipod shows up as a unknown device
    and the device status says "there are no drivers installed for this device".
    anybody know what to do?

    Your iPod's battery may not be charged. Plug your iPod in, wait for a moment, press a button to turn it on, and check the screen. Here are some easy steps to get the most out of your battery. Note: On recent iPod models, when the battery is completely empty, your computer may not recognize your iPod for up to 30 minutes even though it's connected and charging.

Maybe you are looking for

  • Moving Values to fields of different data types- Conversion

    I'm having trouble figuring out how to move a value from a field of a <b>char type</b> to a field of <b>structure RSDSSELOPT</b> type in a different itab. I'll show you what I have so far. DATA: BEGIN OF ITABAPI OCCURS 0,       SEARCHFLD LIKE ZDOLTAR

  • What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO gnrly

    Hi all, What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally? Help will be surely rewarded. Thanks and Regards, Creasy

  • Will 1333 MHz RAM work in a 27" 2012 Intel 3.2 iMac?

    I've got a 27" 2012 Intel iMac 3.2 Ghz - got 4 Gig of Corsair DDR3 laptop RAM that appears to be compatible but it's 1333 MHz instead of 1600 MHz.  I'm assuming it would work but would drop the overall memory speed to 1333 MHz from 1600MHz.  Or shoul

  • SAP Workflow: how to integrate html forms

    Hello. I have to built up a workflow, which starts with an ABAP report. This ABAP Report selects a number of persons and then an email is sent to these persons. A hyperlink should be in this email and the person should click at the hyperlink, which o

  • Scripts in ABAP

    Hello gurus! I have a question about scripts in ABAP. We have a program that requires a lot of queries to obtain info from oracle; we already have a functional version of it but we need to upgrade and this means we have to write a lot more of queries