I save a subsite as a template.... but its not visible when I do a create new site

Hi,
I saved a subsite as a template successfully. I can see that in the solutions gallery my template exists in activated state.
Now when I click on site settings -> create.
I don't see this template in the option to create a new subsite.
Why?
My hope was that I would be able to create more subsites based on this template.

After enabling Publishing go to the Site Settings > Page Layouts and Site Templates section Under Look and Feel.  on that page you will see a list of allowed Site Templates for that site.  You should see your custom template in the box on
the left under page layouts.  Add it to the right side and it should show in the interface when creating a new site.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Similar Messages

  • Please help my flv video file works perfectly localy...but its not visible in remote ftp why??

    hi All,
    Please help me. my flv video file works perfectly localy in
    my computer...but its not visible when i uploaded the flv html and
    flash files to ftp?
    thanks in advance

    This suggestion worked to see the hidden folder(s). Thanks very much, but I feel like I am miles away from moving my ipod music to my new computer and getting it all to work. Here is why...
    1. First when I plug the ipod in, in disk mode, to the USB slot it shows up as a K drive for a minute or so and then disappears. itunes keeps opening, asking me to sync (which will erase all my music on the ipod!) and the K drive (ipod) vanishes.
    2. I pod help says to drag the itunes file out to the desktop and then drag the itunes file on the ipod into the "my music" file within documents and settings. However, there is an "ipod control" file (was hidden) and within this there is the following: artwork, itunes (with 13 subfolders of its own), device, and music. So do I just drag the itunes file inside ipod control into My music? Or do I drag the whole ipod control file? or other?
    3. Additionally there are K drive (ipod) files for calendar, photos, contacts, notes, and ipod control (was hidden). I don't care about any content in the first four, but are they needed to operate? Do I drag these over also to the My music file?
    Whew, very frustrating. Thanks, Ric

  • I updated the spelling of a song in my itunes but its not reflecting when i check my ipod. this never happened before when after i updated to IOS5. please help.

    i updated the spelling of a song in my itunes but its not reflecting when i check my ipod. this never happened before when after i updated to IOS5. please help.

    Try unsyncing the sone and then resyncing. That works sometimes. Sometimes restoring from backup works. Other times nothing seems to work.. Yuo are not alone since iOS5 and iTunes 10.5/6.

  • I baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

    i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I get the message Ipod detected but could not identify when i plugged in my new 7th gen Nano. Tried troubleshooting steps with no luck. Tried plugging in my old iPod and i get the same message.

    I get the message "Ipod detected but could not identify"when I plugged in my new 7th gen nano. Tried troubleshooting steps with no luck, Treid plugging in my old iPod that worked fine and I get the same message.

    Tried troubleshooting steps with no luck
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • I have update my 3g software to 4.21 but its not working when it come to restoring firmware its show a error please help me out

    i have update my 3g software to 4.21 but its not working when it come to restoring firmware its show a error please help me out

    That error shows up when a phone is jailbroken or you are trying to downgrade the iOS version. Neither of which is supported by apple.

  • I can acess my Apple id i have changed my passoword but its not working i have also made a new Apple id but either isnt working?

    I cant acess my Apple u das i forgot my passport although i have changed it but seems not working also i made a new Apple id that isnt working either. How can i buy items or stuff for my games as i dont know the Apple if and password i tryed to change but its not letting me. Can you help me please asap thank you.
    Maria

    My understanding is the you can have three apple ids per device.
    You do want to  be the first to set the Activation lock.  This way you can at least restore you iPad should it get locked out.
    Activation lock
    Find My iPad
    "With iOS 7, Find My iPhone includes a new feature called Activation Lock, which is designed to prevent anyone else from using your iPhone, iPad, or iPod touch if you ever lose it. It starts working the moment you turn on Find My iPhone in iOS 7."
    http://support.apple.com/kb/HT5818

  • Not able to export pdf's to facebook since downlaoding AA XIPro Trial Version. Can open doc's through the address bar and offline but will not open when I post facebook or similar sites.

    Doe's anyone know what could be the problem?

    Please be more specific about what you are doing. Please describe your steps, your browser, and your OS.

  • HT1725 My movie havent been download proparly its show a icloud symbol on the top right corner i keep trying to put the movie on my desktop but its not responding when i try to play the movie but it eithers plays another movie or doesnt play at all

    i wrote my promblem on the title sorry....

    Hello hotsone,
    You may need to download a lower resolution version of the movie in order for it to sync to your iPod.
    iTunes: Sync purchased HD videos to iPod or iOS device
    http://support.apple.com/kb/TS4223
    Cheers,
    Allen

  • I do a radio show, when I pre-record i get a very low end hiss, almost sounds like gain is too high, but its not. If Im live to the station its fine. It only happens when I record. Is there a way to set audition NOT to record that low end sound?

    I use an Allen & Heath broadcast board. When I record to my computer for later broadcast there is a low end hiss/hum barely noticeable when im speaking BUT very prominent when there is a quiet moment.
    Sounds like gain may be tooo high, BUT its not.  When I do a LIVE broadcast using same equipment all is fine!
    Thoughts

    Well, several thoughts here...
    First, what are you using to get from the A&H mixer into your computer and is it in the chain when you broadcast live?  I ask because a lot of built in sound cards are pretty noisy and that could be the source of the problem, fixable with even a very cheap external USB interface
    Second, if the hiss actually starts at the mic/mixer, I know the A&H XB series has a high pass filter on every mic channel.  Have you engaged that?
    That said, it's pretty rare for hiss to be such a low frequency that the high pass filter will kill it.  You may get on better with the Noise Reduction feature in Audition, applied after the recording.
    Anyhow, to repeat how I started, what's your signal chain when recording and how does it differ from when you go live?

  • How should i save a mp3 song so that i can add to itune library? i keep coping to library but its not showing up

    how to save mp3 song and then transfer to itune library? i keep coping to library but its not showing up

    Download it to your computer and make sure you know where the file is.
    Right-click the file, choose Properties and look at the General tab. Make sure the "Type of file" is "MPEG Layer 3 audio file" and that the "Size" is at least several MB.
    Are we good so far?
    If so, find your Automatically Add to iTunes folder (which is inside the iTunes Media folder) and drag your MP3 into it.

  • Customized Seeded report to XMLP report but its not generating output file?

    I want to customize "Dunning Letter Print from Dunning Letter Generate" Report, which is called from "Dunning Letter Generate" Report
    Steps i followed to Customize reports are.
    1. Changed output format to xml for "Dunning Letter Print from Dunning Letter Generate" Report.
    2. Ran report to generate xml data and using xml data created RTF file
    3. Registered data definition and template with code and short name same which is ARDLP_NON_SRS
    Now while i am running report its completing normal, but its not generating output file giving Error like –
    "Unable to find Published Output for this request"
    “No Output File Exist for Request No - xxxxx”
    No Idea why its not picking template, Can anyone help me in this?
    Using:
    Oracle Applications : 10.0.5.2,
    MS Word 2007
    Thanks,

    I am not giving the solution, providing you a hint..
    This is the query you need to satisfy,
    SELECT NVL(R.DESCRIPTION ,CP.USER_CONCURRENT_PROGRAM_NAME)
    FROM FND_CONCURRENT_REQUESTS R, FND_CONCURRENT_PROGRAMS_VL CP,XDO_DS_DEFINITIONS_B XDS
    WHERE ( ( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'U'
    AND R.REQUESTED_BY = :$PROFILES$.USER_ID ) or
    ( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'R'
    AND R.RESPONSIBILITY_ID = :$PROFILES$.RESP_ID ) )
    AND R.PROGRAM_APPLICATION_ID = CP.APPLICATION_ID
    AND R.CONCURRENT_PROGRAM_ID = CP.CONCURRENT_PROGRAM_ID
    AND XDS.APPLICATION_SHORT_NAME=
    ( SELECT APPLICATION_SHORT_NAME
    FROM FND_APPLICATION
    WHERE APPLICATION_ID=CP.APPLICATION_ID)
    AND XDS.DATA_SOURCE_CODE = CP.CONCURRENT_PROGRAM_NAME
    AND R.OUTPUT_FILE_TYPE='XML'
    AND R.STATUS_CODE not in ('E', 'D', 'T', 'X')
    ORDER BY R.REQUEST_ID DESC
    Go to system profiles and query for 'Concurrent:Report Access Level', responsibility you need and modify the profile name accordingly....

  • Creating new site collection using wsp template fails

    Hi all,
    I'm creating new site collections using a wsp solution generated by "save as template".
    For site collection creation I select "<Select template later>" then I upload the wsp solution.
    Everything worked until last month, now after CU installation (agoust 2014) I get an error:
    "List does not exist. The page you selected contains a list that does not exist. It may have been deleted by another user."
    Does anyone know how to solve it?
    Thanks 
    Maurizio

    ULS contains a lot of those errors:
    System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>, 
    StackTrace:
         in Microsoft.SharePoint.SPWeb.GetList(String strUrl)
         in Microsoft.SharePoint.SPWeb.TryGetListByUrl(String url)
         in Microsoft.SharePoint.SPFieldElement.PerformFixUpIfLookUpField(Guid fieldId, XmlNode xmlNodeOfAField, SPWeb web)
         in Microsoft.SharePoint.SPFieldElement.ElementActivated(SPFeaturePropertyCollection props, SPSqlCommand sqlcmdAppendOnly, SPWebApplication webApp, SPSite site, SPWeb webNull, Boolean fForce)
         in Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionFieldsAndContentTypes(SPFeaturePropertyCollection props, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean fForce)
         in Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean fForce)
         in Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
         in Microsoft.SharePoint.SPFeatureCollection.AddInternal(SPFeatureDefinition featdef, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean fMarkOnly)
         in Microsoft.SharePoint.SPFeatureCollection.AddInternalWithName(Guid featureId, Int32 compatibilityLevel, String featureName, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean
    fMarkOnly, Boolean fIgnoreMissing, SPFeatureDefinitionScope featdefScope)
         in Microsoft.SharePoint.SPFeatureManager.EnsureFeaturesActivatedCore(SPSite site, SPWeb web, String sFeatures, Boolean fMarkOnly, Boolean fIgnoreMissing)
         in Microsoft.SharePoint.SPFeatureManager.<>c__DisplayClass7.<EnsureFeaturesActivatedAtWeb>b__6()
         in Microsoft.SharePoint.SPSecurity.RunAsUser(SPUserToken userToken, Boolean bResetContext, WaitCallback code, Object param)
         in Microsoft.SharePoint.SPFeatureManager.EnsureFeaturesActivatedAtWeb(Byte[]& userToken, Guid& tranLockerId, Int32 nZone, Guid databaseid, Guid siteid, Guid webid, String sFeatures, Boolean fIgnoreMissing)
         in Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String&
    bstrWebTemplate, Int32& plWebTemplateId)
         in Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String&
    bstrWebTemplate, Int32& plWebTemplateId)
         in Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
    Int32& plWebTemplateId)
         in Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1&
    featureDependencyErrors)
         in Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors)
         in Microsoft.SharePoint.SPWeb.ApplyWebTemplate(String strWebTemplate)

  • When i login it says my apple id is valid but its not an icloud id

    when I try to login i get a message telling me my apple id is valid but its not an icloud id .I dont have any apple mobile priducts so i have no idea what to do.Any advice would be greatly appreciated.

    You are getting this message because you are trying to create an iCloud account on a PC by signing with your Apple ID.  You can only sign into an existing account on a PC.  You first have to create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher.  After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

  • I downloaded apps from the itunes store and tried to sync them to my ipod touch but its not syncing..... please help!

    i downloaded apps from the itunes store and tried to sync them to my ipod touch but its not syncing.i even restarted my ipod several times but it doesnt seem to work....i tried to delete and re-install the apps but that too doesnt seem to work... and while syncing,the apps are shown in my ipod and after the ipod is synced the apps disappear... dunno wat to do .................please help........

    Do you have Restrictions set that prevent adding the apps? (Settings>General>Restrictions).
    What happens whenyou tru to download the apps directly to the iPod.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for