I saved my design as a jpeg and the image is off-center of a larger white frame
I created a document in Illustrator, as I have many times before. I save it as an AI file and I export it as a .jpeg for my use. When I open the .jpeg file, my 8X11 design appears to be in the right hand side of a larger page. The document is set up to be 8X11. Where does this white band on the left come from and how do I get rid of it? It does not show in the AI design.
Chipleen33 wrote:
The subsequent posts I showed the screenshot in AI...
Yes, but it's a screenshot of the JPEG reopened in AI; not the original Illustrator artwork prior to export. See?
Again, the questions in posts 1 and 2 asked about whether there is something unseen in your original Illustrator artwork prior to export (not the JPEG) which would have the effect of extending your exported JPEG's canvas, as has happened. With the original Illustrator artwork open, selecting all or viewing in Outline mode would help you detect the unseen object(s) and delete them, which would solve your problem.
You appear (according to the screenshot) to answer the question based on reopening the JPEG and concluding: "Yes, when I select all the whole thing is included..." Of course it is. It's a single image. By opening the JPEG instead of the original Illustrator artwork, you fouled the experiment. I was just pointing that out.
Similar Messages
-
Why does my keyboard repeat keys and the screen goes off center?
Keyboard repeats letters, erases multiple letters and generally goes crazy. Also screen goes off center and too large for frame.
First see:
iPhone and iPod touch: Home screen icons are magnified or large
Next try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Used Photoshop Image processor to batch convert from CR2 to Jpeg and the edits don't stick
Ok, so I had a huge wedding where the bride paid me to deliver a ton of images. Well, i did all my edits in ACR and then photoshop. While in photoshop all the edits look to have been applied. So, I use edit > Scripts>Image processor to convert the CR2 files to Jpeg in one fell Swoop. Well, on my last run though (checking any images for missed edits or what not), none of of the edits were applied to the saved jpegs. So I bring one up in Photoshop (the saved Jpeg) and the edits are applied in Photoshop. So I click save and it tries to save as a PSD file (which it was not originally saved as). I click to JPEG and it asks to replace the existing file and I do. Voila, all the edits are a-pplied. Now, I have about 200 images that I need to do this on.
Is this common with the image processor? Is it not for converting processed Raw files to JPEG and keep the edits?
I'm very frustrated since now, depending on my misunderstand of the tool, I have to spend extra time saving the files again. (At least I don't have to re-edit them)I have action I wrote so that on large groups of pictures I hit my actions. It goes through the whole set. Then I hit my flatten and it goes through the whole set. Then I go to scripts > image processor and covert them to jpeg.
The weird thing is when I bring up the jpegs in photoshop, all the edits are there. When I look through Photo Mechanic or upload them to the web, they aren't -
Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.
jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby? -
2 of my personas dissappeared from 'My Gallery' since they've rearranged the viewingorder (from highest ranking to creationdate), and 2 of them are showing double. My designer name is 'Nielske' and the personas not showing in my gallery are: "Madonna - Interview Magazine Collection" and "Madonna - Interview Magazine 4". However they are showing in the complete Persona Database if searched under Madonna (page 5).
== This happened ==
Every time Firefox opened
== the personas in My Gallery (Personas by designer Nielske) got sorted bij date of creation instead of highest rankingI have the same problem.
Here is the link to my gallery - http://www.getpersonas.com/en-US/gallery/Designer/manishp100
as you will see these two, at least, do not appear - I cant remember if there are more that dont.. im sure there might be -
http://www.getpersonas.com/en-US/persona/245197
http://www.getpersonas.com/en-US/persona/245212 -
My Mac book pro which is just one and half years old got dead suddenly. My Protection plan got over and the local authorised service center says the logic board is dead and it has to be replaced. The cost for the same which they are telling is Rs.47500 and another Rs.30000 for the display. Its really sad that a new Mac book pro is costing only Rs65000 in the Indian Market. Please help....I have saved lot of money to buy this Mac and its very sad that it goes off in less than 2 years time.
No one here can do anything to help you.
-
I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.
Have you tried restoring the Preferences yet?
-
I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file. Use the 'properties' command in the Windows Explorer to unlock the file'. This has not happened before. How do I change this?
Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium -
I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???
Also in my iPhone4 the photos that I have downloaded manually from my computer cannot be erased from the phone, how do i do this.???Sounds like you are not running iOS 5 ..........
Update your iPad 2 to iOS 5............
I purchased an iPad 2 for my wife for Xmas and it did not come with iOS 5 so I had to update it......
http://www.apple.com/icloud/get-started/
http://support.apple.com/kb/HT4972 -
So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
Settings > General > Use Side Switch to: choose what you like the Side Switch to function as. -
Make the link from the single cell of Bex Report and the image of bill
Hi guys,
my client scan every bill and archive the image by File.net technology.
In our Bex Report we have the Bill number and we want to make the link from the single cell and the image of bill.
The possible paths to solve the problem are:
Replicate the image in BW and crate a link from the single cell and the image of document.
Create an URL link from the single cell and the image of document archived on File.net server.
In witch way we can to implement the two paths?
Thank you.
AlessandroHi Alessandro,
Have you seen "How To Enhance your Web Query with the Table Interface"?
You can find it in media library:
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000194044
Best regards,
Eugene -
I have one iPhone 8GB. After making un upgrade of iTunes and software of iPhone, it's impossible to use it. There's no service! doesn't acept PIN code! it only makes emergency calls and the image in the iPhone is the sign to connect to iTunes. What can i do to solve it?
Where are you and where did you get the phone. This sounds like a classic symptom of someone who bought an iPhone that originated in the U.S. which was then hacked so it would run on a carrier network other than AT&T... Then, when updating the phone, it becare re-locked to AT&T.
If that's what happened, you now own a paperweight. AT&T will NOT unlock them for any reason.
If this isn't the case, please clarify where you are, what carrier you have and where you got the phone so we can begin troubleshooting. -
I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
ToksHi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden -
My iPad 2 doesn't have the app store I have looked in everything, reset the home screen and the restrictions is off but I still can't find it.
If you got the iPad from your school, and the Installing Apps restriction is 'off' but greyed out (as you 've said here https://discussions.apple.com/message/16137325#16137325) so that the App Store app is hidden, then it's likely that your school has set the restriction - you will need to ask them to remove the restriction for you.
-
Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.
1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu. An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
Maybe you are looking for
-
My screen is blurry on my ipod nano 6g touch screen, what causes this and can it be fixed
-
Help needed to manually uninstall quickVPN v1.4.2.1
I've been trying to make QuickVPN work with Windows 7 SP1 64 bit with no success. I've made a lot of changes and now QuickVPN hangs when I start it and will not uninsall. I'd like to reinstall but that also hangs when I start the installation. I h
-
Correct way to modify Advanced SQL in report
The actual Select on the Advanced tab is something like this: SELECT Incidents."DATE" saw_0, Incidents."TYPE" saw_1, Defects."TYPE" saw_2, "Vessel and Boats"."NUMBER" saw_3 ... FROM "Vessel and Boats Reporting" (this is the catalog name) Now, I need
-
Platform Suse Linux Oracle Warehouse Builder 10G Rel 2 Downloaded owbdemo_files.zip from www.oracle.com/technology/obe/obe_bi/owb/owb-paris/OWB-Getting%20Started/Lesson1_Starting_with_OWB/overview.htm The Oracle By Example Tutorials would be interest
-
Redirecting when page NOT FOUND error occurs
Does anyone now a way to redirect the client to a certain page whenever he encounters 404 NOT FOUND errors? I do not want to use a custom response page, I just want to redirect to a URL. The reason is our clients are WAP clients, and they do not see