I saw some updates in UC , what are those ? which errors they fix...

Hi
I saw some updates in UC (its about a month that i did not check UC)
i find some updates , but where i can find which error they fix or which enhancements they introduce ?
thanks

Check this URL :
http://developers.sun.com/prodtech/javatools/jscreator/downloads/updates/index.html

Similar Messages

How to identify what are all the errors appears in process chain,

Hi all,
i have a process chain running, but i want to find out what are all the errors that the process chain has thrown
thanks
pooja

Hi Pooja,
Errors in monitoring:
SID error
Reason: If the corresponding master data is missing for the particular transaction data.
         1. Check for the load timing for the respective master data, if it less than an hour then make the request red and repeat the ip.
         2. If the data is loaded to PSA then you have to delete the request from target and manually push the data to from PSA.
         3. If we are required for selective update then note down the info source from header and find it in RSA1,select the one with Single as postfix.
         4. Goto data selection tab and change the range.
Tip: change the last 4 digits for from to 0000and the last 4 digit for to     9999.
        5. Repeat the ip.
         6. In case only of failure in one target goto RSA1 find the PSA, put he request no. and reschedule it.
Note: IF PSA is present never make the request red rather delete it.
Replication error
Reason: Data source replication Failed.
         1. In order to handle this error you should be known to IP, info source and source system.
         2. Goto RSA1, find the data source in the source sys tab.
         3. Right click on the data source and replicate it.
         4. Since all the transformation rules pertaining to this data source need to be reactivated so go to SE38 and execute rs_transtru_activat_all, data source and sys name.
         5. Delete the red request from the target.
Update R not supported
Reason: The corresponding initialization flag for the ip is lost.
         1. Goto header click on the ip and goto schedule tab and click initialize in the source system, whatever screen appears delete the only request present(the initialization flag).
         2. Goto RSA1, find the ip in the info source (one with the Adhoc initialize flag).
         3. Goto update tab and select Initialize delta process try going for with data transfer.
         4. Reschedule the IP.
Duplicate Record Error
Reason: Duplicate error records for the loaded master data.
         1. Goto info package via header or via RSA1.
         2. Goto processing tab and change the ip setting, selecting only PSA and ignore duplicate records and re run the ip.
         3. Do remember to change the ip settings back to the original once after the second step.
ODS activation failure
Reason: Prerequisites for ODs activation not satisfied i.e. unique key.
         1. Goto maintain variant.
         2. Check for the QM status of the requests in the target they should be green.
         3. Then click the ODS activation tab.
         4. In the screen which appears put the requests for which ODS activation failed.
         5. Activate these and keep on refreshing them until status reverts from green,
Remember to refresh these requests one at a time.
         6. If requests are red then delete them from target.
         7. Reschedule the IP.
Note: Never Try activating ODS manually if it is Y1.
Aggregate Rollup error
Reason: No aggregate found for the respective rollup.
         1. Click on the variant in which the error occurred.
         2. Goto chain tab and copy the variant and instance.
         3. Run the nestle provided program YBW05.
         4. Put in info in there and put the status as g green.
         5. Execute and refresh the status.
Lock issue
Reason: The same ip is been locked by other user or may be used by other process chain.
         1. We can see the locked entries and in the transaction SM12.
         2. Wait for the other process to get complete once the ip loads to target in that process then there is no need for running it for the process.
         3. In other case make the request red, when PSA is present then goto environment tab ->schedule->initiate update.
         4. In the box appears select update in the background.
         5. And the manually update the failed IPs by selecting manual update in the context menu.
Alfa confirming value error, Time conversion error, Chain didnt start, Delay due to long running job, Poor system performance,Heirarchy node exist in duplicate.
Reasons:
Alfa confirming error: Data format mismatch.
Time conversion error: Date, time format mismatch.
Chain didnt start: A scheduled chain didnt triggered at the prescribed timing.
-For all the above error we have to raise a ticket.
Idoc or TRFC error
Reason: An Idoc is been stuck somewhere.
         1. Reload the Master Data manually again from Info-package at RSA1.
         2. Release the Idoc.
         3. In the source system level got environment->transaction->Transaction RFC or Data ware housing level.
         4. In the Screen if the status is Transaction Recorded it means its stuck goto edit and click Execute LUW or press F6.
         5. If status is Transaction executing then it means its fine wait.
         6. Or raise ticket.
Error Due to short Dump
Reason: Error due to Short dump could be due to many reasons i.e. memory, table space, lock, error record, page allocation, failed change run.
Process terminated in the Source system.
           Reason: Sometimes we face that a load has failed due to job Termination at Source System.
      This happens due to unavailability of the source system or some connectivity problem between source and target systems.
1.      Make the request red.
2.      Delete the request from the data target.
3.      Reschedule the ip.
4.      If still the job fails raise the ticket.
And also check in following links:
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Pls assign points if it helps u,
Thanks & Regards,
Madhu

What are the common errors we get in supporting project

can any body reply what are the common errors we get in supporting project
for abapers tickets will get or not.
what type of tickets generally get regarding reports.

SAP Tickets are nothing but problems or issues raised by the end
customer in a company where end users are running SAP project.
Once the SAP project is implemented, support phase begins. Support
team is responsible for solving the tickets/issues in day-to-day
business.
For any support project, customer will set up Help Desk. If any
problem occurs customer will call Help Desk and register the
issue/Ticket.
Different companies use different software products to manage SAP
Tickets. Remember this software is not provided by SAP. It is third
party software. There are many software products in the market like
Manage Now et c. You can call these software products as tools.
All tools will provide the common attributes which are listed below-
1) Every user will be provided with user name and password to enter
into the tool
2) We can see the tickets assigned for a particular user name.
3) You can list all open tickets by giving the Date Range
4) You can list all closed tickets by giving the Date Range
5) You can list out all the open tickets assigned for an User
6) You can list out all the closed tickets assigned for an User
7) You can see the description of the Ticket, by entering the Ticket
Number. You can see who had raised the Ticket, what is the problem.
What is the severity of the Ticket?
There are lot many other attributes like you can transfer the Ticket
to another user etc.
What is the severity of the problem Ticket?
When a Ticket is raised, it will be given severity. There are
following severities. It may vary from company to company.
Severity 1
Severity 2
Severity 3
Severity 4
The severity will be decided based on the business critical impacts.
If there is large impact on the business it
will be given 1 severity, if it is having least impact then it will be given 4.
Severity 1 problem tickets should be solved in 8 hours.
Severity 2 problem ticket should be solved in 16 hours.
Severity 3 problem ticket should be solved in 15 working days.
Severity 4 problem ticket should be solved in 30 working days.
Again the no of days may vary from one company to another.
All these things will be decided when giving the contract to the IT
company. The agreement is called as "SLA".
SLA stands for Service Level Agreement.
What happens if a particular ticket is not solved by the IT company
according to the SLA/Contract?
The Customer imposes fine on IT company as per the contract/SLA.
Errors in Extraction
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any
infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light
error message:
Master data/text of characteristic ZCUSTSAL already deleted
1)extraction job aborted in r3
2) request couldnt be activated because theres another request in the
psa with a smaller sid
3) repeat of last delta not possible
4) datasource not replicated
5) datasource/transfer structure not active
Issues faced during the implementation :
1. Slippage of milestones
2. Incorrect or wrong design
3. Reporting format problems
4. Data not matching or reconciling problems
5. Issues discovered during testing leading to redesign
6. Performance issues
7. Requirements misinterpretation
9)check the data same in source system and target system ( i mean
suppose u are extarcting from r/3 after loading check ur data r/3 and
bw same or not.
10)that is abap code, i didnt understand ur question properly.
11)
12) generic extarction, if ur businees contect satisfy ur requirement
u go for generic, suppose u need data from different tables go generic
with view with 1:1 relation 1:M relation for function module.
13)v3 update back groud job is in lo
14)its superior info object, u can find this in master data tab .
15)
16)tuning we will go for improve query performance (compression,
aggregates, partation, index, rollup, precalculated web tneplates.)
17) rsa7(check with some one)
18)bw statics for find data base time and olap time and frontend
time(based on u can improve query performance create like aggra comp ,
indices etc..)
19) direct chain only one chain , meta chain if u have more than one chains
load errors u can solve manually, other than load errors u can wait
right click and repeat.
20)
21) u cn cteate other cube and traansfer, but data space waste.(bec
structures will be deffi)
22) u mean data source enhancement.or not(let me know)
23)rsap0001( for customer exit variables) 001 for transaction data 001
attributes, 003 text 004 hierchies.
24)web application design , its like same bex, but report will execute
in browser.
25)
26) arrangement of process are called process type and we can use
varient and start process for back ground jobs.
Don't forget to asign points
regards
ravish

AE what are those things that turns on and off in the Project

AE what are those things that turns on and off in the Project

I had was $1,000 credit in September of 2014. In October, I called Digital Juice, because I had a stroke 25 years ago and I told him I would be foolish to give up $1,000 and join Platinum Account. He agreed with me. He then said why don’t you join Platinum Account, and he can update the $1,000 to the account. I said, OK. Then about January 2, $1,000 was in the Platinum Account. I am starting to do some Wedding videos, and I just noticed that the $1,000 credit wasn’t there. What happened to my $1,000? Oh by the way, your Update Status only goes back to December and not back to July.
Rich
"Todd_Kopriva" <[email protected]> said:
AE what are those things that turns on and off in the Project created by ( https://forums.adobe.com/people/Todd_Kopriva ) in After Effects - ( https://forums.adobe.com/message/7122815#7122815 )
I don't understand the question. Please explain in more detail.

What are the common errors we wil get in BDC?

what are the common errors we wil get in BDC?

hi sunil
BDC errors are similar to what you get in online transaction. Suppose you enter an invalid material number in online ME21N ( create Po ) system will throw an error and you have to correct it by chnaging a valid material number . Same error you can get in BDC as well. It is very difficult to generalize types of error as errors will depend on the transacation you are doing.
However some of the common BDC errors are ( Data for Screen Not Found, Field Not available in Screen ). These again are transaction specific and you have to analyze it by calling the transacion in display ALL mode.
The errors you get depends upon the transaction you are
running.
This is how you handle:
Let's consider you are recording for the transction CJ40
(Messages table declaration )
DATA :BEGIN of t_msg occurs 0.
include structure BDCMSGCOLL.
DATA END of t_msg.
Handling it :
CALL TRANSACTION 'CJ40' using T_BDCDATA MODE 'N' UPDATE 'S' MESSAGES INTO t_msg.
commit work.
If you want to display the errors in the screen you can use a function module named 'RPY_MESSAGE_COMPOSE'
This gives you the corresponding message for the message number that you input.
Below is the sample code
Loop at t_msg. " Messages internal table
w_msgid = t_msg-msgid.
w_msgno = t_msg-msgnr.
w_msgv1 = t_msg-msgv1.
w_msgv2 = t_msg-msgv2.
w_msgv3 = t_msg-msgv3.
w_msgv4 = t_msg-msgv4.
CALL FUNCTION 'RPY_MESSAGE_COMPOSE'
EXPORTING
LANGUAGE = SY-LANGU
MESSAGE_ID = w_msgid
MESSAGE_NUMBER = w_msgno
MESSAGE_VAR1 = w_msgv1
MESSAGE_VAR2 = w_msgv2
MESSAGE_VAR3 = w_msgv3
MESSAGE_VAR4 = w_msgv4
IMPORTING
MESSAGE_TEXT = t_text-text.
TABLES
LONGTEXT =
EXCEPTIONS
MESSAGE_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MESSAGE_TEXT contains the message.
Please reward points if this explanation useful.
Regards,
navjot
reward points

What are the common error while EBS installation in Unix /windows

what are the common error while EBS R12 installation with os unix and windows.
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?
regards

Hi user;
what are the common error while EBS R12 installation with os unix and windows.AFAIK there is no document which show common error.There are some common error for installation like:
RW-5004- RW-50010 etc.
For error we have to check instalaltion log files for can get more details about it
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?Oracle has 2 checking mechanisim during installation.
1. Before start installation, rapidwiz makes Validate system Configuration check which is checking port avaliability,file system check etc.
2. End of the installation,rapidwiz makes Validate system Configuration again to check jsp,dbc file, db avaliablity etc..
For more details Please check:
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
Hope it helps
Regard
Helios

What are the possible errors that can happen in data loads(rsmo monitor)?

hi all,
what could be the error that could result in red color in the RSMO monitor of data load transaction?
1. request everything ok
(what are the possible error type which make here red)
2. extraction everything ok
(what are the possible error type which make here red)
3. transfer (idocs and trfc) error occured?
(what are the possible error type which make here red)
4. processing
- data package
5. process chain
(what are the possible error type which make here red)
6 other messages.
(what are the possible error type which make here red)
thanks
pooja

Hi,
I can tell you the most common reasons of these failures.
1. request everything ok
Here it will be telling you if the request was properly send to source system and got triggered there.
2. extraction everything ok
In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
3. transfer (idocs and trfc) error occured?
When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
4. processing
Processing in BW fails for each data packet is displayed here.
This can also happen when you have sysfail in source.
5. process chain
This can show the logs of the chain here and also status of subsequent process.
6 other messages.
Any other error message.
Refer
What is the information we can get the through details tab in RSMO
working with RSMO errors
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also
Data Load Errors
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Data Load issues
Errors in loading
data loading errors
load Errors
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Hope this helps.
Thanks,
JituK

What are those apps which are promoted on " why you 'll love your ipad " page

What are those apps which are promoted on " why you 'll love your ipad " page. I mean there r some pictures of ipads , and i'm really curious about that apps which are in the screen, cause i 'd like to try them.

Edgy44 wrote:
I mean, why shouldn't those apps show up when I look for them,
Most likely because they are not apps. They are background processes the OS is runnning.
I would expect as the owner to have some sort of explanation of who the 3rd party is, why there apps are apprearing on your ipad without permission, and maybe the ramifications of taking off or at least turning them off. Its not rocket science, people. It really about our rights as pople, right???
I suggest you sell your iPad and not worry about it any longer.

What are those drivers

http://imageshack.us/photo/my-images/694/selection008m.png
I installed Audio drivers but there is audio device on high definition audio. Generally what are those drives? How can i fix them?
I'm on Lenovo X61s
Thanks,
Moderator Note: Image size > 50k, converted to link.
Solved!
Go to Solution.

download Thinkvantage System update, it should download all the necessary drivers for you.
These drivers are related to the Audio devices, modem, ethernet, Intel Controller, etc.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

What are those checkboxes?

Hello. What are those little checkboxes next to the song titles, and what are they used for? What's the difference between checking the box, and selecting the song by clicking (highlighting) it? Has Apple published an article that answers my question? I can't find any explanation for them. Maybe I'm using the wrong search terms. Thanks.

If you have an iPod you can choose to "sync only checked songs and videos" rather than your entire library.
I use it to keep a few audio books on my iPod rather than my entire collection. I like to keep almost all of my music on my iPod, but there is some stuff I don't want on my iPod all the time (interviews, some lossless stuff) I use it so certain songs don't sync to my iPod. It's the same with TV Shows and Movies-- I definitely don't want all of those on my iPod at all times-- they take up way too much space.
You can also use the checkboxes in playlists-- when you create a new playlist, there's an option to "Match only checked items."
Unchecked tracks will be ignored when playing from your library (though they will play if you specifically select one of them).
Unchecked songs won't be burned to CD.
Genius and iTunesDJ don't take checked songs into account.
I think that's it.

What are the common errors that occur while extraction is carried out?

Hi all,
What are all the errors that occurs while extraction for fico, sd and mm?
Can anyone list me the errors along with the solution.
regds
hari

Hi hari shankar
It depends
Like the data level errors ,Short DUmps
USER EXIT ERRORS
some time source system code errors.
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Winners dont do different things,they do things differently**
> Hi all,
>
> What are all the errors that occurs while extraction
> for fico, sd and mm?
>
> Can anyone list me the errors along with the
> solution.
>
> regds
> hari

Some of my contact names are not appearing when they text message me. They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

some of my contact names are not appearing when they text message me. They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

I have this identical problem. For a while my group texts didnt show up on my ipad. Then one day they did, maybe everyone in the group started using the same os version or something. Ever since my first reply to the group there have been complaints of multiple threads. I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time) Everyone in the group has deleted the thread, we've all toggled imessage on/off etc. There still hasn't been a solution.
Any help would be appreciated.
Thanks

How To Handle Tickets and What are those

Hi Everybody,
Can anybody tell me, How to handle tickets and what are those.
srinivas

Hi,
Tickets are basically assocaited with Production support type of work.
Tickets are nothing but the medium through which problems reported either in the system or by users to the Production support team.
There are certain problem management tools that every organization uses (tickets are created and worked on using those tools). There are tools like Vantive, Remedy, CASE, etc.
Usually the helpdesk gets the first contact for any user problems and then they log a ticket with the appropriate support teams. The support teams then pick up those tickets and work on them till they are resolved. There are tickets created for user problems or any batch job failures, system failures, etc.
Tickets are usually classified as Critical, High or Low and again they are categorized as High Severity, Medium Severity or Low Severity. All these types of tickets have SLAs (Service level agreements) for the Support teams to respond and the resolve the tickets in.
Look at the threads below for similar posts :
tickets
Tickets
tickets
Cheers,
Kedar

What are all the errors that can be corrected by using tran code rsrv?

hi all,,
what are all the errors that can be corrected by using tran code rsrv?
can anyone list me out a list of errors that can be rectified using rsrv. And let me know the steps involved to rectify those errors using trns code rsrv.
regds
hari

Hi Kalyan,
I have urgent need of the RSRV DOCS.
Can you mail it to [email protected]
I will highly appreciate.
Thanks in Advance
SS
Points will be awarded

What are the general errors will come in data uploading

Hi Friends,
What are the general errors will come in data uploading
Thanks in Advance

Paul
It all depends on how we configure the system. Errors may be different for different scenerios like
User ALEROMOTE Loacked for master data's
Data Sourcs has to be replicated
Activation Failures
Error occures in data Selection Etc.
Do you have any specific error so that we can work on that.
Thanks
Sat

I saw some updates in UC , what are those ? which errors they fix...

Similar Messages

Maybe you are looking for