I search for the SAP transaction for customer part-payment

Hi,
If a customer pays only a part of the invoice is there a special SAP transaction
to enter this payment or must I use F-06 and then proceed in a special manner?
Regards, Anita
help.sap.com

Dear Anita,
Partial payment is a standard SAP functionality. The rules of this forum do not allow asking basic questions. Before posting a thread try searching the forums and SAP main Help portal (help.sap.com). You will find the answer there...
Best regards,
Eli

Similar Messages

Error while using Special GL indicator H for Customer Down Payment

Dear Friends,
I have configured the Special GL Indicator H (Security Deposit) for Customer Down Payment received. I also make the necessary settings in OBXY for assignment of Special GL against the reconciliation account.
When I am doing the Customer Down Payment entry through F-29 using special GL indicator H system giing me the following error message
Special G/L indicator H is not defined for down payments
Message no. F5053
Diagnosis
The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".
System Response
The entry is not accepted.
Procedure
Enter an allowed special G/L indicator or initiate a change of the default settings
I also check the configuration again but still systems is giving me the same above error.
Kinldy give me the solution or way of doing this ASAP because I am working in an implementation Prj.
Regards,
Sandeep

Dear Surya,
I have made the necessary changes in Special GL Indicator F in their properties I assign target spl GL indicator H but while in spl GL indicator H when I assign target spl GL indicator F system gives me following error
Delete target special G/L indicator
Message no. F4137
Diagnosis
In the SAP system, you can only use "Target special G/L indicators" with "Down payment/down payment request" when "Noted item" is also selected at the same time. These requirements are not fulfilled in the special G/L indicator "H".
Procedure
Delete the specified target special G/L indicator.
Effects on Customizing
You can define when this system message is to be issued in accordance with your requirements.
You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
The application area and message number can be taken from the technical documentation.
Thanks,
Sandeep

Process steps for customer incoming payment w.r.to Billing.

Hi all,
Can some body help me in by providing the process steps for customer incoming payment w.r.to Billing.i want to know the process from open items to cleared item , if possible pl give table names also and thier data flow using tables.
thanks

Dear Sai,
Use the transaction code F-28.Give the document date, Bank account, amount received, Value date, and the customer code. In case you know which are the document numbers against which you have received the payment, select the "Document numbers" in the "Additional selection" tab and then click on "Process open items".
Fill the document numbers in the next field, press enter and then click on "Process open items". Select the open items, simulate and then save.
In case you do not have the document numbers, then directly click "Process open items", select the line items and click "Document > Simulate" and then save.
Assign points if useful.
Regards
Venkatesh

Please let me about the SAP transaction code(s)

Please let me about the SAP transaction code(s) from which I will get monthly data of the folowing:
Material or product wise listing of raw materials used in WIP & converted to Finished goods remaining as closing stock

Dear parameswar
The simple work is go to MM60, give material type ROH (for raw material) and execute. You will get list of all raw materials. Make a note of it and now go to MB51, give those material codes and give movement type 261 for issue from stores and execute. You will get raw materialwise details of how much quantity has been issued to WIP. The same exercise you have to do for FERT.
thanks
G. Lakshmipathi

Please let me about the SAP transaction code(s) from which I will get month

Please let me about the SAP transaction code(s) from which I will get monthly
Material or product wise listing of cost of finished goods sold & lying as stock

Dear parameswar
Go to SE16, give the table MBEW and select the following fields:-
VERPR - If you want to see the moving average price of that particular material
STPRS - If you want to see the Standard price of that particular material
SALK3 - If you want to see the total valuated stock of that particular material
To see how much stock is available, run MMBE and execute. You can also check in MC.9 (mcdot9)
thanks
G. Lakshmipathi

Implementing Data Search for Custom Objects

Can any one have some information on implementing search criteria for custom objects.
I am looking to modify the drop down values and search criteria based on custom data model.

Hello Rajesh,
The following configuration activity might resolve your query.
Transaction: mdgimg.
General Settings> UI Modelling> Define Field Properties for UI. Select your custom data model and go to "Hide Field Names."
For the fields of the entity type, you don't want to come up in the search UI, check on "No selection".
"No Selection" : These wouldn't come up as search Criteria. "No Results List": These won't come up in final result list.
Best regards,
Shephalika.

BAPI to search for customer in CRM based on search terms

Hi,
Could anyone please tell me if there is a function module in CRM to search for BP's based on search terms. ( Just as we could enter '*' in search terms in transaction BP and get a list of customers ).
Thanks in advance,
Sahil

Hi Sahil,
You can make use of BAPI_BUPA_SEARCH.
In the import parameter CENTRALDATA you can pass the
search terms.
Ranjit

Help needed in Inbox search for Custom attribute

Hi,
We have a requirement where in we are having a custom attribute on Service request to store the ECC Order number.
We have enhanced the Inbox search to retreive all the service requests havig the ECC order number.
Here we are encountering a problem. i just created a new crm service request and entered order number 1234. and now when i search for the same in Inbox search giving the criteria order number as 1234. I get no results found. But when i extend the max list to 2000, then i see the service request appearing in the result list. not sure about the algorithm that is designed for inbox search.
Any pointers on how to resolve this issue would be of great help.
Thanks,
Udaya

Hi,
I do not have the time to research this completely, but I had a short look into the class you posted.
In the GET_DYNAMIC_QUERY_RESULT there is a call to CL_CRM_QCOD_HELPER->PREPROCESS( )
A little bit lower there are blocks marked by comments for the single searches that are handled by this class. I had a look into the campaign_serach() method. There if you scroll a little bit down (around line 123) they set all search parameters to SIGN = 'I' OPTION = 'EQ'. This is done several times below as well.
Set a breakpoint in the proprocess() method and check which of the blocks is called and how they handle your search criteria.
Hope it helps.
cheers Carsten

BAPI to search for customer

dear all
Iam search for a BAPI to be used in search for particular customer using one of its attribute wich is stored in kna1 table
and also search in its details stored in ADRC taple if possible.
and also BAPI for search for equipment using one of its attribute like serial number or sold to party .
thank you

Hi lamey,
the function module BAPI_HELPVALUES_GET has exceptionally good documentation.
Please read it an makle use of the IMPORTING and TABLES parameters to get what you want:
*" IMPORTING
*"     VALUE(OBJTYPE) LIKE BAPIF4A-OBJTYPE DEFAULT SPACE
*"     VALUE(OBJNAME) LIKE BAPIF4A-OBJNAME DEFAULT SPACE
*"     VALUE(METHOD) LIKE BAPIF4A-METHOD
*"     VALUE(PARAMETER) LIKE BAPIF4A-PARAM
*"     VALUE(FIELD) LIKE BAPIF4A-FIELD OPTIONAL
*"     VALUE(EXPLICIT_SHLP) LIKE BAPISHLP STRUCTURE BAPISHLP OPTIONAL
*"     VALUE(MAX_OF_ROWS) LIKE BAPIF4A-MAX_ROWS DEFAULT 0
*"     VALUE(DESCRIPTIONONLY) LIKE BAPIF4A-DESCRIP DEFAULT SPACE
*" EXPORTING
*"     VALUE(RETURN) LIKE BAPIRETURN STRUCTURE BAPIRETURN
*" TABLES
*"      SELECTION_FOR_HELPVALUES STRUCTURE BAPIF4B OPTIONAL
*"      HELPVALUES STRUCTURE BAPIF4C
*"      VALUES_FOR_FIELD STRUCTURE BAPIF4D
*"      DESCRIPTION_FOR_HELPVALUES STRUCTURE BAPIF4E
EXPLICIT_SHLP can be used to specify the search help
SELECTION_FOR_HELPVALUES can be used to specify complex selection criteria.
Read the genreal documentaion and the parameter documentation, it has many hints for you.
Let us know if successful, Thank you.
Regards,
Clemens

Report for Customer wise Payment

Hi All,
I want a report for Customer who has been maintained on Cash Basis ( One Time Customer). The customer are sold on cash so there is only one entry passed inm FI that is
Bank A/c Dr
To Sales A/C Cr
That means we donot have record customer wise in SAP. But since billing document is created for these customers too, we might be having some report.
I want if there is any report in SD or FI which can give e cutomer wise payment details
Thanks in Advance. I am quite liberal in assigning points.
Rg
VK

Hi,
You can write a custom report to pull the data , say from BSID, BSEC with documnetnumber as key field.
Hope this helps.
Thanks,
Vamsi

Validation for Customer Incoming Payment

Dear All,
We are facing one issue regarding customer incoming payment. When user is making income payment via f-28, he enters the credit control area and GL Account according to division.
Problem is, though customer master in Sales Area is not maintained, system allows to post the incoming document. Due to it, customer credit limit does not get updated and we have to update it manually every time by resetting the customer master.
Do anyone have any validation for that in F-28?
Regards,
Jigar

Hi,
Look in to the given link for Create Validations.
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/5b/d231e143c611d182b30000e829fbfe/frameset.htm
Regards,
Sridhar Sha

How to use F-04 for customer invoice payment

Hi All,
we post cutomer invoice in FB70 & then use F-28 for customer payment. Could you please advice if I can use F-04 instead of F-28 for customer payment.
Regards
Deepak

Dear Deepak,
there is no difference between the two transaction F-04 and F-28, if You use the F-04 with Incoming payment flag switched on.
The F-04 like FB05 are the generic classic trancations that can be used for incoming, outgoing, credit memo and clearing at once: changing the flag You can do different posting without running different transction as F-53, F-28 and so on.
Thanks.
Mauri

Withholding Tax for Customer Down Payment F-29

Dear all,
I have configured the withholding tax and it works fine for the AP: invoice, payment, advance payment.
However I encountered problem for AR side: customer down payment (F-29). During the payment there is a "withholding tax" button that once you click a pop-up window will appear to enable you enter the withholding tax data.
My problem is no withholding pop up window appear and no error message as well. Thus I am unable to enter the withholding tax data.
The customer has been assigned with withholding tax type and withholding tax code. I follow the follow documentation for the configuration steps and it works well on AP side.
http://www.sapficoconsultant.com/Bonus/Extended%20Withholding%20tax%20configuration.pdf
Can you please kindly advise if there is any missing step need to be performed for withholding tax configuration for customer? How to solve the above issue?
thank you very much in advance.
Dahlia

Hi Umesh,
Thank you very much for your quick respond.
Yes, I forget to mentioned in my previous email, I have done the following in the customer master:
1. Assigned withholding tax type and withholding tax code.
2. Enter the validity date from and to.
3. Check the withholding tax checkbox in customer master.
However the F-29 still do not have a withholding tax window pop-up.
Any other things that I need to do?
Thanks a lot.
Dahlia

To small appearance of the SAP Transaction Callable Object

Hello,
I use a Callable Object of the type SAP Transaction in my Guided Procedures process. The problem is, that the resulting iView is only about 100px high. This appearance is not realy usable. Is there any possibility to modify the responsible appearance parameters?
Thanks and Regards
Robert

Hi Robert,
Have you found a way to solve the problem? I have a similar situation and I want to change the size too..do let me know if you have found out how to do it.
Bye!
Sameer

Customer part payment of receipt

Hi
We are accounting part payment by selecting the residual payment option. When we select residual payment SAP create a new item line where we update in header orginal Invoice reference where system will not loose orginal Invoice.
Alternatively if we account by selecting partial payment, System shows Invoice & receipts separately. In F-32 we need to clear the open items. Open items can be cleared only Invoice & receipts are matched 100%.
We are facing the problem when we run the debtors ageing. When we account part payment route through residual & Inovice reference is mentioned in the aging Invoice reference will not appear.
If we account the receipts through partial payment, in ageing report credit & debit will appear in different age buckets.
Can any one help how do we overcome this issue.
Kumar srikantiah

hi
While using F-32 go to editing options and select option "include invoice reference"
Regards
Sachin

I search for the SAP transaction for customer part-payment

Similar Messages

Maybe you are looking for