I see a computer in Finder under "Shared" that does not exist

I see a computer in Finder under "Shared" that does not exist.How do I get rid of it?

Does anyone thing it's possible that installing the OS without the Airport card working has caused the system to completley ignore it even though it may now have a working card and cable, seems unlikely to me but really struggling to know where to look now.

Similar Messages

The shared variable does not exist????

This seems really strange!!
I already use several shared variables within my whole project without any problem. At this point, I created a new one (a boolean network published) and everything seemed just fine (no errors were detected in my VI and it runs normally). However, when the VI on my host computer tries to use the shared variable, it generates an error message saying "LabVIEW: (Hex 0x8BBB0005) The shared variable does not exist." (see attached screenshot).
What is going on? I can't find any help online about that... Can anybody help me with this please?
Thanks!

Hello,
This error can occur if you have an incorrect Path specified under your Bind to Source section for the shared variable - this could be as simple as a typographical error in the defined path. Double-check that portion of your shared variable definition, and hopefully it'll be as simple as finding a typo in your path. You should be able to browse for your variable/path by clicking Browse and then selecting Network Items if your shared variable is on the network. Can you find it by browsing?
I hope this helps!
Best Regards,
JLS
Message Edited by JLS on 10-05-2006 03:54 PM
Best,
JLS
Sixclear

Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help

Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help

Welcome to the Apple community.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

HT1688 why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore.

why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore. i can reset password because i doent know what the old one was

Hi lgmmo,
I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
A quick Chat session should get you fixed up.
Please let us know if you have additional questions.
Best,
Sara

Hey i cant get into creative cloud because it keeps asking me to verify and email that does not exist nor i have acess to. i cant find out how to sign out and i tried deleting it and re downloading it!

hey i cant get into creative cloud because it keeps asking me to verify and email that does not exist nor i have acess to. i cant find out how to sign out and i tried deleting it and re downloading it!

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-wrong email https://forums.adobe.com/thread/1446019

Backups arent completing with error cant find folder or it does not exist

Hello,
Lenovo X1 Carbon, windows 7 pro 64bit. Core i5, 8GB RAM, 256 GB SSD. No DVD player. 500 GB External USB 3.0 Hard drive.
My backups aren't completing while using Windows Backup and Restore (WBaR). It says it can't find a folder that doesn't exist on a drive that doesn't exist(e.g. 'D:\X1\Desktop\folder_name') I have a ultrabook from Lenovo, there is no D: drive. there
is the C: Drive and the Lenovo Recovery drive (Q:). However, the folder name matches a folder that WAS on my desktop ('C:\[USER]\Desktop\folder_name')the first time that I used WBaR.
At first, I thought it was that folder, so I moved it to the Recycle bin. Then I tried moving it to a documents folder. Same error. So, then I thought it had to do with Carbonite and Dropbox. So I turned both of them off. No joy.
I tried searching for a folder named X1 using the command line. No luck.
I found this support article at http://support.microsoft.com/kb/979281, but none of these scenarios match mine. I have exhaustively searched for someone who had a problem with a Drive letter being assigned to Windows backup that doesn't exist on their
computer. But no joy.
Can anyone help me? I don't think this is serious, but it is annoying, since WBaR doesn't list when my last backup was because of the problem. Plus, I'm worried about whether it will work when I need to recover files.
Original title
"Windows Backup skipped D:\X1\Desktop\[folder] because it cannot be found on drive D:\." Drive D doesn't exist

Hi,
Please turn off backup and turn on to relocate the backup place as your USB drive.
As I known, it's impossible to backup the files on the same partition, so C drive is system drive and impossible for your backup.
Post back your event log related to this issue here for our research.
Kate Li
TechNet Community Support

Rsh - connecting using user name that does not exist on remote computer

hi
is it possible to connect to a remote computer as, for example John, if user account John does not exist on the remote computer but is listed in .rhosts?
this is what i have written in .rhosts on the remote computer ( Work ):
home root
home John
when I connect as root:
rlogin -l root Work
everythings fine, but when I try to connect as John I get the incorrect login message
I know the message above probably answers my question, but I want to be sure

If the user id exists, you can bypass the authentication with .rhosts or /etc/hosts.equiv files; but you can't login to a remote machine as an anonymous user.

Shared realm does not exist in EBS R12.0.6

Hi,
I am having some problem with the database startup.
when i ran startup command through sqlplus database starts and after 30 sec it gets terminated.
When trying to connect with apps it returns:
SQL> conn apps/apps
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
when connecting with sys it connects to an idle instance.
Here is the contents of alert log.
Fri Jan 15 11:17:14 2010
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =48
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
tracefiles_public = TRUE
processes = 400
sessions = 445
timed_statistics = TRUE
shared_pool_size = 419430400
shared_pool_reserved_size= 41943040
nls_language = american
nls_territory = america
nls_sort = binary
nls_date_format = DD-MON-RR
nls_numeric_characters = .,
nls_comp = binary
nls_length_semantics = BYTE
sga_target = 1073741824
control_files = /d01/oracle/PROD/db/apps_st/data/cntrl01.dbf, /d01/oracle/PROD/db/apps_st/data/cntrl02.dbf, /d01/oracle/PROD/db/apps_st/data/cntrl03.dbf
db_block_checksum = TRUE
db_block_size = 8192
compatible = 10.2.0
log_archive_dest_1 = LOCATION=/d01/oracle/PROD/db/apps_st/data/archive
log_archive_format = %t_%s_%r.dbf
log_buffer = 14254080
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = AUTO
undo_tablespace = APPS_UNDOTS1
db_block_checking = FALSE
session_cached_cursors = 500
utl_file_dir = /usr/tmp, /usr/tmp, /d01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/p1_prod1, /usr/tmp
plsql_native_library_dir = /d01/oracle/PROD/db/tech_st/10.2.0/plsql/nativelib
plsql_native_library_subdir_count= 149
plsql_code_type = INTERPRETED
plsql_optimize_level = 2
job_queue_processes = 2
systemtrig_enabled = TRUE
cursor_sharing = EXACT
parallel_min_servers = 0
parallel_max_servers = 8
background_dump_dest = /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump
user_dump_dest = /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/udump
max_dump_file_size = 20480
core_dump_dest = /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/cdump
db_name = p1
open_cursors = 600
ifile = /d01/oracle/PROD/db/tech_st/10.2.0/dbs/p1_prod1_ifile.ora
sortelimination_cost_ratio= 5
btree_bitmap_plans = FALSE
fastfull_scan_enabled = FALSE
sqlexecprogression_cost= 2147483647
likewith_bind_as_equality= TRUE
pga_aggregate_target = 1073741824
workarea_size_policy = AUTO
optimizer_secure_view_merging= FALSE
aq_tm_processes = 1
olap_page_pool_size = 4194304
PSP0 started with pid=3, OS id=4730
PMON started with pid=2, OS id=4728
MMAN started with pid=4, OS id=4732
DBW0 started with pid=5, OS id=4734
LGWR started with pid=6, OS id=4736
CKPT started with pid=7, OS id=4738
SMON started with pid=8, OS id=4740
RECO started with pid=9, OS id=4742
CJQ0 started with pid=10, OS id=4744
MMON started with pid=11, OS id=4746
MMNL started with pid=12, OS id=4748
Fri Jan 15 11:17:17 2010
ALTER DATABASE MOUNT
Fri Jan 15 11:17:21 2010
Setting recovery target incarnation to 2
Fri Jan 15 11:17:21 2010
Successful mount of redo thread 1, with mount id 2209107325
Fri Jan 15 11:17:21 2010
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Fri Jan 15 11:17:22 2010
ALTER DATABASE OPEN
Fri Jan 15 11:17:23 2010
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Fri Jan 15 11:17:24 2010
Started redo scan
Fri Jan 15 11:17:24 2010
Completed redo scan
563 redo blocks read, 77 data blocks need recovery
Fri Jan 15 11:17:25 2010
Started redo application at
Thread 1: logseq 16, block 1326509
Fri Jan 15 11:17:25 2010
Recovery of Online Redo Log: Thread 1 Group 1 Seq 16 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log01a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log01b.dbf
Fri Jan 15 11:17:25 2010
Completed redo application
Fri Jan 15 11:17:25 2010
Completed crash recovery at
Thread 1: logseq 16, block 1327072, scn 5965375192662
77 data blocks read, 33 data blocks written, 563 redo blocks read
Fri Jan 15 11:17:26 2010
Thread 1 advanced to log sequence 17
Thread 1 opened at log sequence 17
Current log# 2 seq# 17 mem# 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Current log# 2 seq# 17 mem# 1: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Successful open of redo thread 1
Fri Jan 15 11:17:26 2010
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Jan 15 11:17:26 2010
SMON: enabling cache recovery
Fri Jan 15 11:17:28 2010
Incremental checkpoint up to RBA [0x11.3.0], current log tail at RBA [0x11.2b.0]
Fri Jan 15 11:17:29 2010
Successfully onlined Undo Tablespace 368.
Fri Jan 15 11:17:29 2010
SMON: enabling tx recovery
Fri Jan 15 11:17:29 2010
Database Characterset is US7ASCII
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=16, OS id=4758
Fri Jan 15 11:18:27 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/udump/p1_ora_4750.trc:
ORA-00600: internal error code, arguments: [4193], [16615], [4919], [], [], [], [], []
Fri Jan 15 11:18:37 2010
Doing block recovery for file 379 block 91877
Block recovery from logseq 17, block 133 to scn 5965375195253
Fri Jan 15 11:18:37 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery stopped at EOT rba 17.407.16
Block recovery completed at rba 17.407.16, scn 1388.3960588405
Doing block recovery for file 379 block 105
Block recovery from logseq 17, block 133 to scn 5965375195158
Fri Jan 15 11:18:37 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery completed at rba 17.134.16, scn 1388.3960588315
Completed: ALTER DATABASE OPEN
Fri Jan 15 11:18:44 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_cjq0_4744.trc:
ORA-00600: internal error code, arguments: [4194], [55], [46], [], [], [], [], []
Fri Jan 15 11:18:46 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_mmon_4746.trc:
ORA-00600: internal error code, arguments: [4194], [60], [62], [], [], [], [], []
Fri Jan 15 11:18:47 2010
Doing block recovery for file 379 block 77280
Block recovery from logseq 17, block 412 to scn 5965375195270
Fri Jan 15 11:18:47 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery stopped at EOT rba 17.420.16
Block recovery completed at rba 17.420.16, scn 1388.3960588422
Fri Jan 15 11:18:47 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_q002_4764.trc:
ORA-00600: internal error code, arguments: [4194], [70], [67], [], [], [], [], []
Doing block recovery for file 379 block 89
Block recovery from logseq 17, block 412 to scn 5965375195262
Fri Jan 15 11:18:47 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery completed at rba 17.414.16, scn 1388.3960588417
Fri Jan 15 11:18:47 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_cjq0_4744.trc:
ORA-00600: internal error code, arguments: [4194], [15], [24], [], [], [], [], []
Doing block recovery for file 379 block 92961
Block recovery from logseq 17, block 420 to scn 5965375195274
Fri Jan 15 11:18:50 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery stopped at EOT rba 17.422.16
Block recovery completed at rba 17.422.16, scn 1388.3960588424
Doing block recovery for file 379 block 41
Block recovery from logseq 17, block 420 to scn 5965375195271
Fri Jan 15 11:18:50 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery completed at rba 17.422.16, scn 1388.3960588424
Fri Jan 15 11:18:50 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_cjq0_4744.trc:
ORA-00600: internal error code, arguments: [4194], [57], [51], [], [], [], [], []
Fri Jan 15 11:18:51 2010
Doing block recovery for file 379 block 5763
Block recovery from logseq 17, block 416 to scn 5965375195277
Fri Jan 15 11:18:51 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery completed at rba 17.425.16, scn 1388.3960588430
Doing block recovery for file 379 block 57
Block recovery from logseq 17, block 416 to scn 5965375195267
Fri Jan 15 11:18:51 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery completed at rba 17.418.16, scn 1388.3960588421
ORA-607 encountered when generating server alert SMG-4120
Fri Jan 15 11:18:51 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_mmon_4746.trc:
ORA-00600: internal error code, arguments: [4194], [13], [25], [], [], [], [], []
Fri Jan 15 11:18:52 2010
Doing block recovery for file 379 block 7170
Block recovery from logseq 17, block 418 to scn 5965375195291
Fri Jan 15 11:18:52 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery stopped at EOT rba 17.490.16
Block recovery completed at rba 17.490.16, scn 1388.3960588439
Doing block recovery for file 379 block 225
Block recovery from logseq 17, block 418 to scn 5965375195269
Fri Jan 15 11:18:53 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery completed at rba 17.420.16, scn 1388.3960588423
Fri Jan 15 11:18:53 2010
Doing block recovery for file 379 block 222590
Block recovery from logseq 17, block 422 to scn 5965375195307
Fri Jan 15 11:18:53 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery stopped at EOT rba 17.638.16
Block recovery completed at rba 17.638.16, scn 1388.3960588457
Doing block recovery for file 379 block 25
Block recovery from logseq 17, block 422 to scn 5965375195275
Fri Jan 15 11:18:53 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery completed at rba 17.424.16, scn 1388.3960588428
Fri Jan 15 11:18:53 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_cjq0_4744.trc:
ORA-00607: Internal error occurred while making a change to a data block
ORA-00607: Internal error occurred while making a change to a data block
Fri Jan 15 11:18:54 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_j001_4774.trc:
ORA-00600: internal error code, arguments: [4194], [23], [16], [], [], [], [], []
Fri Jan 15 11:18:54 2010
Doing block recovery for file 379 block 5444
Block recovery from logseq 17, block 484 to scn 5965375195322
Fri Jan 15 11:18:54 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery stopped at EOT rba 17.711.16
Block recovery completed at rba 17.711.16, scn 1388.3960588473
Doing block recovery for file 379 block 113
Block recovery from logseq 17, block 484 to scn 5965375195284
Fri Jan 15 11:18:54 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery completed at rba 17.487.16, scn 1388.3960588437
ORA-607 encountered when generating server alert SMG-4121
Fri Jan 15 11:18:55 2010
DEBUG: Replaying xcb 0x9dbdd5b0, pmd 0x9d391c00 for failed op 8
Doing block recovery for file 379 block 4983
No block recovery was needed
Fri Jan 15 11:18:55 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_j001_4774.trc:
ORA-00600: internal error code, arguments: [4194], [23], [16], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [23], [16], [], [], [], [], []
Fri Jan 15 11:18:56 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_m000_4770.trc:
ORA-00600: internal error code, arguments: [4194], [15], [24], [], [], [], [], []
Fri Jan 15 11:18:56 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_j001_4774.trc:
ORA-00600: internal error code, arguments: [4194], [23], [16], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [23], [16], [], [], [], [], []
Fri Jan 15 11:18:58 2010
Flush retried for xcb 0x9db7ddb0, pmd 0x9d3a2f18
Doing block recovery for file 379 block 92961
Block recovery from logseq 17, block 420 to scn 5965375195274
Fri Jan 15 11:18:58 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery completed at rba 17.422.16, scn 1388.3960588427
Fri Jan 15 11:18:59 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_m000_4770.trc:
ORA-00600: internal error code, arguments: [4194], [15], [24], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [15], [24], [], [], [], [], []
Fri Jan 15 11:19:01 2010
DEBUG: Replaying xcb 0x9dbdd5b0, pmd 0x9d391c00 for failed op 8
Doing block recovery for file 379 block 4983
No block recovery was needed
Fri Jan 15 11:19:02 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_pmon_4728.trc:
ORA-00600: internal error code, arguments: [4194], [23], [16], [], [], [], [], []
Fri Jan 15 11:19:03 2010
Flush retried for xcb 0x9db7ddb0, pmd 0x9d3a2f18
Doing block recovery for file 379 block 92961
Block recovery from logseq 17, block 420 to scn 5965375195274
Fri Jan 15 11:19:03 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 17 Reading mem 0
Mem# 0 errs 0: /d01/oracle/PROD/db/apps_st/data/log02a.dbf
Mem# 1 errs 0: /d01/oracle/PROD/db/apps_st/data/log02b.dbf
Block recovery completed at rba 17.422.16, scn 1388.3960588427
Fri Jan 15 11:19:03 2010
Errors in file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_pmon_4728.trc:
ORA-00600: internal error code, arguments: [4194], [23], [16], [], [], [], [], []
Fri Jan 15 11:19:03 2010
PMON: terminating instance due to error 472
Instance terminated by PMON, pid = 4728

The database gets up for just around 30 sec. there sufficient space available.
database version is 10.2.0.
Here is some of the contents from trace file may be it could help.
Dump file /d01/oracle/PROD/db/tech_st/10.2.0/admin/p1_prod1/bdump/p1_j001_4774.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /d01/oracle/PROD/db/tech_st/10.2.0
System name:     Linux
Node name:     prod1.luckyerp
Release:     2.6.9-42.0.0.0.1.ELsmp
Version:     #1 SMP Sun Oct 15 15:13:57 PDT 2006
Machine:     x86_64
Instance name: p1
Redo thread mounted by this instance: 1
Oracle process number: 23
Unix process pid: 4774, image: [email protected] (J001)
*** SERVICE NAME:(SYS$USERS) 2010-01-15 11:18:53.962
*** SESSION ID:(414.1) 2010-01-15 11:18:53.962
*** ktuc_diag_dmp: dump of current change vector
ktudb big redo: cnt: 1 um: 0x9d393b28 uba: 0x5ec01377.7984.10
*** ktuc_diag_dmp: dump of block after image in hex
Dump of memory from 0x0000000081C0C000 to 0x0000000081C0E000
*** ktuc_diag_dmp: dump of buffer cache for rdba 0x00001fe8
Dump of buffer cache at level 4 for tsn=368, rdba=8168
*** ktuc_diag_dmp: dump of redo for rdba 0x00001fe8
Dumping current redo log in thread 1
DUMP OF REDO FROM FILE '/d01/oracle/PROD/db/apps_st/data/log02a.dbf'
Opcodes *.*
DBAs (file#, block#):
(379, 8168)
RBAs: 0x000000.00000000.0000 thru 0xffffffff.ffffffff.ffff
SCNs: scn: 0x0000.00000000 thru scn: 0xffff.ffffffff
Times: creation thru eternity
FILE HEADER:
     Compatibility Vsn = 169869312=0xa200000
     Db ID=2206994534=0x838c1066, Db Name='P1'
     Activation ID=2206976614=0x838bca66
     Control Seq=481268=0x757f4, File size=2048000=0x1f4000
     File Number=2, Blksiz=512, File Type=2 LOG
descrip:"Thread 0001, Seq# 0000000017, SCN 0x056cec11be57-0xffffffffffff"
thread: 1 nab: 0xffffffff seq: 0x00000011 hws: 0x2 eot: 1 dis: 0
resetlogs count: 0x2a17dba8 scn: 0x056c.eb6c5439 (5965364352057)
resetlogs terminal rcv count: 0x0 scn: 0x0000.00000000
prev resetlogs count: 0x2a17daae scn: 0x056c.eb6c3eb2 (5965364346546)
prev resetlogs terminal rcv count: 0x0 scn: 0x0000.00000000
Low scn: 0x056c.ec11be57 (5965375192663) 01/15/2010 11:17:25
Next scn: 0xffff.ffffffff 01/01/1988 00:00:00
Enabled scn: 0x056c.eb6c5439 (5965364352057) 12/21/2009 16:30:32
Thread closed scn: 0x056c.ec11be57 (5965375192663) 01/15/2010 11:17:25
Disk cksum: 0xa41e Calc cksum: 0xa41e
Terminal recovery stop scn: 0x0000.00000000
Terminal recovery 01/01/1988 00:00:00
Most recent redo scn: 0x0000.00000000
Largest LWN: 0 blocks
End-of-redo stream : No
Unprotected mode
Miscellaneous flags: 0x0
Thread internal enable indicator: thr: 0, seq: 0 scn: 0x0000.00000000
REDO RECORD - Thread:1 RBA: 0x000011.00000002.0010 LEN: 0x0070 VLD: 0x05
SCN: 0x056c.ec11be59 SUBSCN: 1 01/15/2010 11:17:26
CHANGE #1 MEDIA RECOVERY MARKER SCN:0x0000.00000000 SEQ: 0 OP:17.3
Crash Recovery at scn: 0x056c.ec11be56
END OF REDO DUMP
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 321Kb in 0.03s => 10.45 Mb/sec
Total physical reads: 4096Kb
Longest record: 9Kb, moves: 0/914 (0%)
Change moves: 474/2047 (23%), moved: 0Mb
Longest LWN: 135Kb, moves: 0/84 (0%), moved: 0Mb
Last redo scn: 0x056c.ec11c8af (5965375195311)
NO VALID LOG MEMBER FOR SEQ# 16 OF THREAD 1!
*** 2010-01-15 11:18:54.087
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [4194], [23], [16], [], [], [], [], []
----- Call Stack Trace -----

Get-Item: Cannot find path ' ' because it does not exist. While running Powershell script.

I am trying to run a PowerShell script to upload files into a SharePoint site in an Azure environment...the script works fine on my local machine, but every time I run it in Azure (remotely), I get errors. Here is what my simple script looks like...
if ( (Get-PSSnapin -Name Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue) -eq $null )
Write-Host "Loading Sharepoint Module "
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
Add-PSSnapin -Name Microsoft.SharePoint.PowerShell
if ( (Get-PSSnapin -Name Microsoft.SharePoint.PowerShell) -eq $null )
Write-Host "Failed to load sharepoint snap-in. Could not proceed further, Aborting ..."
Exit
#Script settings
$webUrl = "http://sampleWebUrl"
$docLibraryName = "My Documents"
$docLibraryUrlName = "My%20Documents"
$localFolderPath = get-childitem "C:\Upload\Test Upload\My Documents\" -recurse
$contentType = "ContenttType1"
#Open web and library
$web = Get-SPWeb $webUrl
write-host "Web:" $web
$docLibrary = $web.Lists[$docLibraryName]
write-host "docLibrary:" $docLibrary
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
write-host "files:" $files
If ($contentType = "ContenttType1")
#Open file
$fileStream = ([System.IO.FileInfo] (Get-Item $file.FullName)).OpenRead()
# Gather the file name
$FileName = $File.Name
#remove file extension
$NewName = [IO.Path]::GetFileNameWithoutExtension($FileName)
#split the file name by the "-" character
$FileNameArray = $NewName.split("_")
$check = $FileNameArray.Length
#Add file
$folder = $web.getfolder($docLibrary.rootFolder.URL)
write-host "Copying file " $file.Name " to " $folder.ServerRelativeUrl "..."
$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
write-host "Success"
write-host "SP File:" $spFile
write-host "SP Item" $spItem
#populate columns
$spItem["Column1"] = $FileNameArray[0]
$spItem["Column2"] = $FileNameArray[1]
$spItem.Update()
$fileStream.Close();
Again, I can run this on my local machine and it works just fine, but when I attempt to run it on the Azure environment I get this error...
Get-Item : Cannot find path 'C:\powershellscripts\12653_B7045.PDF' because it does not exist.
At C:\PowerShellScripts\Upload-FilesIntoSharePointTester.ps1:32 char:42
+ $files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
+ ~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (C:\powershellscripts\12653_B7045.PDF:String) [Get-Item], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetItemCommand
What strikes me first is the fact that the file its looking for is in the "C:\Upload\Test Upload\My Documents\" directory, but the error keeps saying "C:\powershellscripts\" which is where my script resides and not the files I want to
upload into SharePoint. When I step through the code, all the variables are holding the correct values. The $localFolderPath shows the name of files that I am attempting to upload, so it recognizes them. But once I step through this particular line of code,
the error occurs...
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
Is this an error caused because I am remoting into the Azure environment? Has anyone dealt with this issue before? I would really appreciate the help. Thanks
Update: quick thing I noticed is that these two lines of code are returning null values. Again, is this handled differently in Azure or remotely? I ask cause this is the way I know how to do this, locally.
$docLibrary = $web.Lists[$docLibraryName]
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()

"...square brackets are wildcard characters in Windows PowerShell..."
When you use cd without a parameter it uses the -Path parameter. In this case you'll have to escape the square brackets so they are not considered wildcards. Each of the commands in the first example does the exact same thing.
cd 'Learn PowerShell `[Do Whatever`]'
cd -Path 'Learn PowerShell `[Do Whatever`]'
cd (or Set-Location) also has a literal path parameter (-LiteralPath) that does not require using an escape character (`) before each of the brackets. Hope this helps.
cd -LiteralPath 'Learn PowerShell [Do Whatever]'

Shared realm does not exist

I have installed Oracle 9.2.0.1.0. I had a system crash (Ho, HO, Its microsoft). Since that time, I get the following :-
ORA-27101: shared memory realm does not exist.
when Itry to login. I search technet, and got six results, each telling me I have a problem, but not giving a solution. any ideas ?
cheers and thanks in advance

I have installed Oracle 9.2.0.1.0. I had a system crash (Ho, HO, Its microsoft). Since that time, I get the following :-
ORA-27101: shared memory realm does not exist.
when Itry to login. I search technet, and got six results, each telling me I have a problem, but not giving a solution. any ideas ?
cheers and thanks in advance

My iMac intel shows a shared computer that does not exist and I cannot disconnect. How can I remove it?

A computer appears to be shared, but there is no info on it and I cannot connect nor disconnect it. Three of us have tried all the things we could think off without success. It has been going on for months and does slow down some applications that seem to attempt connectionc.
When I reboot I get the following message thre of four times.
There is a problem connecting to the server Isabelle's IMac G5 (10). The server may not exist or it is unavailable at this time. Check the server name or IP address. Check your network connection, and try again.
I have done all that it says, there is no IP address and the network connection seems OK. If I attemp to move the icon representing this server to the Thash, it turns for a short time to an Eject but then it comes back saying that the item cannot be deleted.
Any suggestions?

Hi,
Does this "server" appear in System Preferences > Users > your account > Login Items ?
I have my MacBook Pro listed here as at one time I used it's USB drive for Time Machine on this iMac.
The shot is from a Mavericks computer where the panel is called User and Groups
If the MacBook Pro is not On line when I start up the iMac I get the same message as a pop up.
9:51 pm Tuesday; May 27, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Imac will not see my hard drive on start up, wants to start from network start up disk that does not exist. How to get rid of it? So there is just one choice / my hard drive.

I have a Intel duo Imac. Everything has been running relatively smoothly for a few years now. All of a sudden my computer will not start. I get the flashing folder with a question mark.
When I go to Start up disk in my system perfernces while the computer is on. I see 2 possible choices. One is my hard drive with the operating system shown. The other is a non-existant Network Start up disk with a question mark in it ( looks like a hard drive with a question mark and it say's its a "network start up disk).
All I think I want to do is get rid of the Network startup with the question mark. I can not find anywhere how one can just remove an old or non existant start up disk without reformatting.
I believe this came from a clients hard drive who had a network system on it. We no longer have that drive. It no longer exists. But a latent icon shows up in start up disk.
When I go to change the start up disk. I can change it to either the hard drive or the network with the question mark. But when I select my hard drive and then got to restart the computer. I get the flashing folder with a question mark on start up. I have also seen the flashing globe a couple times.
When I attempt to run disk utility from may install disk ( holding down "C" on start-up ). Disk utility does not see my hard drive. Just the Apple install disk with the disk utility on it.
What can I do to remedy this short of re-installing? Will a program like Disk Warrior or Tech Tool help?

Thank you. That's what I thought will need to happen.
One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know? It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
Just trying to put a band-aid on it for another couple weeks.

How to delete an iCloud account and turnoff Find my Phone for a email address that does not exist

I have switched my itunes account to a new email address but the iCloud account is still registered to the old email account which I can no longer access.
If I go to Settings>iCloud it requests my Apple ID password for the old email account but as this account does not exsist it does not accept the "old" password. it will not let me delete the account without turning off the Find My Phone app which aslo needs the old password.
A related probelm is none of my apps will update as they are on the old account hence the need to delete the iCloud email account and create the new iCloud with the new email sign on address.

If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address (you won't need to verify it) and save the change. You should now be able to use your current password to turn off Find My iPhone, even though it prompts you for the password for your old account ID. After turning it off you can delete the account, go back change your ID back to the way it was again.

CTRL-F Find text in page does not exist/work

I ran the latest Firefox mobile on my Nokia N900 with PR1.2 firmware.
When viewing a web page, I wanted to find some text in the page, so I hit CTRL-F but this feature does not seem to exist.

The [https://addons.mozilla.org/en-US/mobile/addon/130877/ Find in Page add-on] adds a find-in-page command to the address bar.
We might include a built-in Find in Page command in a future version of mobile Firefox.

HT204074 I have been reading about how to associate devices with my Apple ID, and the info says I can go to my account through iTunes to find "Manage Devices" but that does not exist. Either it was phased out our there are other ways to get there, but can

I am trying to find out about all my associated devices. I recently got a message that I had used my last device, and am not sure how this can be. The instructions for accessing the info via the iTunes account info page apparently were not shared with the programmers since there is no Manage Devices button or option as far as I can see. How do I do this?

After hours and hours of failed searches, I must have used a different keyword in my Google search, and here is the website that I was looking for:
https://supportprofile.apple.com
And here is the guy whose website I found that helped me solve my problem:
http://www.marcomc.com/2011/01/how-to-find-the-list-of-my-apple-registered-produ cts/
I was going to rant here about how badly Apple designed their "Apple Id" stuff, how they strongly distinguish between using your Apple Id at the online Apple Store vs. using it at the App Store (which you have to get to via iTunes ... quite ridiculous) ... but I won't. :-)
Anyway, I hope that the two previously mentioned websites will be of help to others.

I see a computer in Finder under "Shared" that does not exist

Similar Messages

Maybe you are looking for