I see no burning TAB

i went to my iTunes preferances and i see no tab called "BURNING"
i added a few songs to my library
and i wantd to TEST burning to cd just to make sure i can do it before i start purchasing songs from the store
the help section says the following but i have no tab called BURNING
Burning an audio CD in iTunes for Windows
Using iTunes for Windows, you can burn an audio CD with your computer's CD-R or CD-RW drive.
If your computer has a CD-R or CD-RW capable drive, including some DVD-R and DVD+R drives, you can make or "burn" an audio CD using iTunes for Windows. If you're not sure what kind of drive your computer has, or if it can burn a CD, you can easily find out.
To burn an audio CD:
1. Open iTunes for Windows.
2. From the Edit menu, choose Preferences.
3. Click the Burning tab.
4. Select "Audio CD" as the disc format.
-------------

When you have the playlist open that you want to burn, look in the lower right-hand corner, there's a "burn disc" button. You push this and you should be good to go.
(This button location has changed from previous iTunes versions so it's confusing.)

Similar Messages

Itunes freezes on Burning tab access

When i go to the preferences option under edit, and then select the advanced tab everything works fine. But when i click on the Burning tab my itunes freezes up and i have to log out using the task manager. For as long as i can remember it has always been slow to work but now it just doesn't work at all. I ran out of ideas to fix it. Any advice would be appreciated.
thanks,
triplesports17
Windows XP

triplesports17,
The upper / lower filters in your registry is where it has the queue of CD drivers and the order that it loads them into Windows when you boot. And the order that all CD commands go through the system — all CD commands are passed from driver to driver in this order until it find the driver that wants the command. It's possible to get old, out of date drivers here and have problems with bugs in these drivers because the iTunes CD commands will go through them first on the way to its CD driver. For example, in your case, that AFS2K driver is from a company called Oak Technology that has been out of the CD driver business for years and years. I'm suspicious of that driver in your queue.
Your other two drivers, Pxhelp20 is Sonic Solutions and they're good, I seldom see a problem with them, and GEARAspiWDM is the iTunes CD driver.
So, let's try a quick experiment to see if that's the problem.
On the start menu, click on "run". in the space it provides enter "regedit" without the quotes. This will open the registry editor.
Find the heading HKEYLOCALMACHINE. Click on it.
Find the heading SYSTEM inside it. Click on it.
Find the heading CurrentControlSet. Click
Find the heading Control. Click
Find the heading Class. Click
Find the heading that begins {4D36E965- Click
Go up to the Registry menu and select "Export Registry File... command. Make sure the "Selected Branch" radio button is checked and save that off somewhere that you can find it.
Delete the key named LowerFilter. This will temporarily remove both the Sonic Solutions and the Oak Technologies drivers, but we're going to put them back after the experiment.
Then reboot, and see what iTunes does.
To get the system back to its previous state. Run Regedit again and use the Registry menu -> Import Registry File... command and select the file that you saved off in the first section.

No burn tab in my itunes

If I insert a blank cd I get the pop-up..so it's obviously reading my disc player.. but there is no burn tab at the bottom of iTunes. No burn tab in preferences and no burn selection if right clicking on the album to be burned.
Screenshots:
http://i312.photobucket.com/albums/ll326/vyvexthorne/Itunes3.png
http://i312.photobucket.com/albums/ll326/vyvexthorne/itunes2.png
http://i312.photobucket.com/albums/ll326/vyvexthorne/Itunes1.png
Anyone know why this is?

As you can see from the pictures.. that is a playlist as far as I know and everything is checked. the pictures also show that I did right click it. There are absolutely no burn settings and no burn options available. I can burn fine from other programs like winamp.. I just don't want to have to go through the hassle of reorganizing everything in winamp like I already have it organized on i-Tunes. I have no problem importing cd's so connectivity isn't the problem.
If I'm doing something wrong please post a picture of what your burn settings look like so I have something to compare to.

I Don't See a Photo Tab Anywhere - Can't Add or Delete Photos

I want to add (synch) photos to my iPod Touch and I also want to delete some photos from the Touch as well. I am told to connect the iPod to the computer, open iTunes and then select my iPod in the Device menu on the left. I am then told to click on the "Photo Tab" that appears in the resulting window.
There isn't any Photo Tab in the window. The tabs I see are, from left: Summary, Apps, Music, Movies, T.V. Shows, Podcasts, iTunesU and Books. That's it. I am running iTunes 9.2.0.61.
At the bottom of the Mike's (that's me) iPod screen, it shows that I have 67 photos on my iPod Touch, which is correct.
But how am I going to add or delete photos if I can't see a Photos tab?

Thank you. That was the problem. I regularly keep my resolution at 800x600 which is the lowest you can get. I do that because the higher resolutions cause my eyes to burn. But I pay a price for that - usually what has happened here. I won't be able to "X out" of a screen, because there is no way to do it. There is - I just can't see it because the resolution needs to be cranked up a tad.
Anyway, Photo Tab now fully in view. Good work.

Can not see the administration tab in EM

Hi, I installed Oracle 10g EE Release 2. However, when I log in to EM and I want to see the Administration tab, I have to enter again the user and password I gave them and I got this error: Database error I/O Exception: Unknown host specified
I check on metalink and said that is due to the TZ zone so I modified the file emd-properties and run emctl resetTZ agent without success
Someone knows about a patch that solve this.
Thank you

Hi,
See if this thread below help you:
Can't connect to Oracle server, windoze 2003 server.
Cheers

How to fix freeze/lock ups when opening Burn tab under iTunes Preferences

Played around the past few nights with two PC's with the same problem after upgrading to iTunes 6.0. Would open burn tab under preferences and promptly lock up iTunes. Thought it was a driver problem, etc... Thanks to Toonz, here is what solved it simply for me on both PC's:
Run iTunes Help, CD Diagnostics, Run "CD diagnostics" and save output file from CD diagnostics somewhere on your PC (not even sure it's necessary to save file) and you should be able to view your burner tab and the CD/DVD drives preferences. Seems that iTunes CD diagnostics file gets corrupted, and needs updating after updating iTunes.

Silver, thanks for posting these instructions which were originally posted by MacMuse on the following thread.
http://discussions.apple.com/thread.jspa?threadID=159372&start=0&tstart=0

I'm having trouble loading photos on my I phone 4s and I pod. I don't see the photos tab in Itunes?? Prob user error but wanted to get some help.

I'm having trouble loading photos on my I phone 4s and I pod. I don't see the photos tab in I-tunes? I'm sure its user error but wanted to get some help.

What's the origin of this external drive? It sounds very much like it's a Windows-formatted (NTFS) drive which Macs can't write to. If you can, copy the files off the drive, reformat it as Mac format (using Disk Utility) and copy the files back. If you need to continue writing to it from a Windows PC, you should format it ExFAT in Disk Utility.
Matt

Is there a way to see all your tabs (in all groups) at once while still keeping the tabs grouped?

I like being able to have my tabs grouped in FF4, but sometimes when the groups are small I'd like to be able to just see all the tabs at once, with the ability to go back into panorama and switch to viewing only one group if need be. Is there a way to do this?

Flat view (the Filter folder icon with the red stashed circle) has stopped working for me in Leopard. Works in Tiger.
I'm on: OSX 10.5.5, Mac Pro, Bridge CS3 v.21.0.100

HI,I am unable to see all the tabs in ACC, getting the following error

I am unable to see all the tabs in ACC, getting the following error.
ERROR [ComponentAgent] Request for URL:
http://sathya-PC:8080/dyn/init-session did not return a valid session.
Please check your settings for siteHttpServerName, siteHttpServerPort,
webApplicationPrefix and initSessionURL for component
/atg/devtools/DevSessionManager/_2/atg/devtools/ComponentAgent
serverport : 8860
servername : localhost
Note:I included DCS in Manifest and Run the DCS in SQL
Please Help me out from this issue
Thanks

Verify and chage if required.
Ports are configure at /atg/dynamo/Configuration component,
httpPort , httpsPort , drpPort , fileDeploymentPort , rmiPort , fileSychronizationDeploymentPort , adminPort , siteHttpServerPort
Noramly :
siteHttpServerPort and adminPort: app server port
Thanks,
Nitin.

Unable to see the configuration tab in DB13C in SOLMAN

Dear Experts,
I have a question where i am unable to see the configuration tab -> add systems in DB13C in our SOLMAN server (version is SAP NetWeaver 2004s), but i could locate the tab in other R3 systems, may i know for DB13C what is the difference between sapnetweaver and r3 systems?
I have gone through note 853610, it did not specify any scenarios relevant to mine.
Appreciate the replies. Thank you.
regards,
Lee

Hello Lee,
What is the Basis patch level in your solman system?.
Please, see the note 1028624.
Have you tried from DB13C -> Administration -> "Migrate db13C configuration"?
Regards,
Rafa

Unable to see the Hyperion tab in Excel 2003

Hi Hyperion gurus,
Can anybody shed light on an issue that a user encountered with Smartview? This user installed Smartview and had been using it without any problems. We just started parallel testing and he needed to use Smartview as part of the process. He is now unable to see the add-in in Excel 2003. He has no Hyperion tab and we cannot find any evidence that it has been installed. We reinstalled Smartview but even after reinstalling Smartview he is still unable to see the Hyperion tab in Excel. What is puzzling is that he does have the Hyperion tab in Word and is able to connect.
Would appreciate any help provided? Thanks.

I have seen the same exact problem at my company regarding the missing Hyperion tab in Excel (but present in MicroSoft Word). If you go into Excel, then select 'Help', then About MicroSoft Excel, then you'll see 'Disabled Items'. Scan the list for HSAddin.Dll. If this is on the list, highlight it, then select the 'Enable' button. (this is my first suggestion). I've also had to do the following in some isolated cases:
You should also try re-registering the following 3 SmartView DLL files. To do this, simply locate where these 3 files are stored on your local machine (the file names are):
HSAddin.dll
HSSpread.dll
HyperionSmarttag.dll
Usually these are stored within the following path: C:\Hyperion\Smartview\bin
To Register the files:
Open DOS (start->run->cmd) and change your path to C:\Hyperion\SmartView\bin
Type in the following, hitting enter key after each line:
regsvr32 hsaddin.dll
regsvr32 hsspread.dll
regsvr32 hyperionsmarttag.dll
You should receive a 'success message' for each file you register. Reboot your machine following this, and go back to Excel. Your menu should now be in place.
Thanks,
James Pryal

Why can't I see the carrier tab in my settings?

Why can't I see the carrier tab in my settings? This iphone5 was bought in india where the phones are NOT locked

No, that just shows the carrier. I am looking for the setting>general>carrier tab from where you can select the carrier you want to connect to either automatically or manually. The previous iPhone 5 had it, Apple exchanged the set as it had a hardware problem and it's missing from the new set. Want to get it back

I imported all my favorites from Internet Explorer, but in the Firefox window I don't see a favorites tab. I've got a bunch of favorites that I don't want to have to redo. Any advice?

Question
I imported all my favorites from Internet Explorer, but in the Firefox window I don't see a favorites tab. I've got a bunch of favorites that I don't want to have to redo. Any advice?

You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Show All Bookmarks).
If you have problems with importing the IE Favorites in Firefox then export the Favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager. 
That way you also preserve any sorting that you may have done in IE with the Favorites.
* Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export
* Import the HTML file in Firefox: Bookmarks > Show All Bookmarks > Import & Backup > Import HTML: From File
See also:
* http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

I used to be able to open a second tab to get to another web site without closing the first one....now I can see the second tab but when I click on it nothing happens...

I used to be able to open a second tab to get to another web site without closing the first one...now I can see the second tab but when I click on it, nothing happens..

This issue can be caused by the Ask.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbARCD/3.13.1.18107
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

HT1507 I do not see a firewall tab when going to System Preferences Sharing?

I do not see a firewall tab when going to System Preferences>Sharing.
I am unable to make or receive iChat video calls.
Trying to figure out what is going on with my router.

Hi,
For others.
The Firewall is in System Preferences > Security > Firewall
There are then slight variances in Leopard and Snow Leopard/Lion about when you turn it ON and when you can access the Advanced Button
If it is set to ON then you need to go to the Advanced Button and Enable Allow Signed software
You may also need to add iChat (Or message beta) to the List.
NOTE
Enabling Stealth will stop iChat/Messages from working.
8:28 PM Wednesday; March 28, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I see no burning TAB

Similar Messages

Maybe you are looking for