I see wave but no spectral frequency and no sound

I recorded 40 min sermon in multitrack. It's 245Mb file. I played on two different computers and with different programs but no sound. In CS 5.5 I see wave form but spectral frequency display completely black. What happen? Did I lose my recording?

That is my suspicion, though I can't think of any good reason why this might have happened.
Kost7 - Can you tell me if there was anything out of the ordinary when you recorded this file? Did Audition crash or were there any warning messages that popped up? Were you ever able to hear any signal?
When Audition records in multitrack, it writes directly to a file on disk. (In Waveform view, it records to a temp file as an intermediary step - not the case here.) After the recording process has stopped, it scans the recorded file and generates a ".pkf" file which contains a lower-resolution representation of the waveform.
This implies that there WAS audio data in the WAV file at the time that pkf file was generated. The only way I've been able to sort of simulate this behavior is by deleting the WAV file, but not the .pkf file, then opening the session up and recording a new clip on the same track. In this scenario, the existing .pkf file does not appear to be regenerated to reflect the new recording. I'll enter this as a bug, but I doubt you'd forget to mention this if it were your situation.
Is the session file displayed, 20120325.sesx, the one in which you recorded this session? I notice it's only 30 seconds in duration, so I'm unclear if they're related. Could there be a different session file on disk? Have you tried previewing all of the wav files in the _Recorded subfolder where your session file is located?

Similar Messages

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s Solutions?

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s. Any ideas?

Question: Is all the source footage shot in 16 bit audio or is some also shot in 12 bit?
http://docs.info.apple.com/article.html?artnum=42973
http://www.kenstone.net/fcphomepage/idvd_6stone.html
http://docs.info.apple.com/article.html?artnum=93006
http://docs.info.apple.com/article.html?artnum=303550
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/397.html
http://docs.info.apple.com/article.html?artnum=61636
http://docs.info.apple.com/article.html?artnum=302925

ATV will see homeshare but will not load and play video.

ATV2 will see and connect to my homeshare library but when I try to watch anything (Movie, TV Show, etc) it shows the loading animation for about 5 minutes and then says that an error has occurred. It was all working two days ago but stopped working when we had a power outage. I have tried resetting the computer, the ATV2, and the router. I have also tried restoring the ATV2. Nothing works. Again, it will allow me to select a video to watch but will try to load and fail.
ATV2- up to date.
iTunes- up to date.
iMac- up to date.
No Firewall.
I am not sure what else to do here guys... I have tried literally EVERYTHING that I have found in these support topics and everything that I could think of to get this to work again. I also have an ATV3 in the other room and it is working fine. I know it is NOT a bandwidth issue because everything was working just fine until the power outage 2 days ago which lasted only about 2 seconds..
Any suggestions?
About ready to drop-kick this thing and go get a new ATV3 from the Apple Store...
HELP?!
Mahalo (Thanks) for any help you can give!
Steve.

I am sorry to see that no one replied to this issue. has it been resolved? Unfortunately not for me. I am having the same problem. Interestingly enough I can play music files from my homesharing iTunes library but I cannot play any video content - including music video.
APT2 Loads content (take at least 3 min.)
Indicates that the movie is there
I click play or select
The gear starts spinning
5 minutes later I get the error message: An error occurred loading this content. Try again later.
I have not changed anything in the house regarding computers or routers - other than updating Apple TV 2

Iphone appears under devices, but i see nothing but the apple logo and a blank box when i select the device.

This is after i updated it worked fine before

talking to applecare now. It's because apple store is down

My 4s lost sound on text alerts, music and keyboard clicks but still plays ringtones and alarm sounds. Took to Genius Bar but they said never seen anything like it and to buy a new one. Help please, need fix to get all sound back!

Lost partial sound, speakers work but keyboard, music, text alert does not except on headphones, please help!

If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434

Why can I not convert a film clip from my Vivitar DVR 975HD? The conversion in black and no sound

I use Windows 7 - the clip is 35 sec long, 1280x720, no bitrate info

I can open the clip recorded on the Vivitar in Windows Media Player.
I can open the clip converted in Adobe Media Encoder in Windows Media Player, but it's black and no sound.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

I have a project which won't open. I can see it, but when I click on it an animated gb guitar shoots up and the app closes down. I am using an iPad 2. All my other projects are opening fine.

I save my project by returning to my songs, but the app quit. Now I can see my project, but when I try and open it an animated gb guitar whooshes up and the app quits. I have tried rebooting. I'm really not techie at all and will only understand answers that say a) your project's knackered or b) your project's fine, just do this one really easy thing. I am using an iPad 2 and there are no updates waiting.

Sydneybling it does sound like your security software is interfering with the process of installing and utilizing your Adobe Creative applications. I would recommend that you try temporarily disabling your security software and utilizing the directions listed at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html to install InDesign CC.

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns but I can cut and paste them so I know they are still there. Has this happened to others

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet. I have charts and other stuff related the the original table so I need to figure out why I can only see from column C forward. I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?

I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).

Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing? When I set up my desktop, I can find some of the pictures. Where do They hide,

Missing Pictures.
Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
Have made back up, but unfortunately a little too late. What to do?
MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

When I call someone using FaceTime from my mac, they can see me but no hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro

When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
If I use google it works. If I use Ichat, it works. If I use skype it works.

This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

The issue: Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!
SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
The cause: It is now clear what caused this problem. For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.). In May 2012 I decided to make some of them one hour events so I could add alerts to remind me of the event. I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
The symptom: Syncing stopped working for the calendar but continued working for contacts and notes. I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious.
The failed attempts: I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance. From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012. Events before May were in both Outlook and the iPhone but events after May were only one or the other. Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious. MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things. We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
The fix: After 18 months of frustration, MANY hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync problem and it indicated all day events were related. I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events, sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync. It synced for the first time in 18 months!
Problem occurred May 2012 – fixed Nov 2013

Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
It will recursively remove all '_ModGrp...' folders
Sub RemoveFolders_Click()
    Dim oOutlook As Outlook.Application
    Set oOutlook = New Outlook.Application
    Set objNameSpace = oOutlook.GetNamespace("MAPI")
    Call CleanFolders(objNameSpace.Folders)
End Sub
Sub CleanFolders(objFolders As Outlook.Folders)
    For i = objFolders.Count To 1 Step -1
        If Left(objFolders(i).Name, 7) = "_ModGrp" Then
            objFolders.Remove( i )
        Else
            If Not objFolders(i).Folders Is Nothing Then
                Call CleanFolders(objFolders(i).Folders)
            End If
        End If
    Next i
End Sub

TS1702 I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just give me a blank page.!!!! what is the solution for this.!!!!

I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unless i get check for each every app on the app store installed on my iphone... what is the solution for this.!!!! can any1 one help me out.!!!!

Cc2528 wrote:
The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
but I would be more inclined to to the factory reset and start afresh.

I see wave but no spectral frequency and no sound

Similar Messages

Maybe you are looking for