I seem to be stuck Yosemite public beta 2

I seem to be stuck on the public beta 2. Under the update tab there is an update for OS X Yosemite Beta 2. When I click on it to update it nothing happens. If i try to download the official update in the app store it says "OS X v10.10 is already installed on this computer. Use the Updates page to install the 10.10 update or if you would like to download the full OS X installer click Continue." I don't have an option to click continue. theres an "ok" button but it only closes the popup. I feel like i need to do a clean install of Yosemite but i can't even download the installer. Any help is greatly appreciated.

Similar Messages

Should Handoff and Continuity work with iOS 8 and Yosemite Public Beta 3?

I have an iPad Air with the latest iOS 8 update installed and a new iMac 27" with Yosemite Public Beta 3 installed and I can't get Handoff to work as described on either device. Handoff is enabled in system preferences on the iMac and in settings on the iPad. It will not display the bouncing icon for the respective app (i.e Safari or Mail) or they will not appear on the lock screen of the iPad. Also, I cannot seem to get the Bluetooth LE to auto pair the iPad and the iMac. Any help or insight with these issues would be greatly appreciated. Maybe i'll have to wait for the release of Yosemite to the public for everything to work. But what is the Beta for?
Thanks

I have the same setup, but on 2013 MBP w/Retina, same problem. No evidence of handoff, even though it is enabled on all devices and I've followed all instructions I can find online. Very disappointed, as I was most excited about this. I know its still beta, but you'd think on a 3rd public beta, when it worked in previous releases that it'd be working...

Can't upgrade from Yosemite public beta 2 to 3

Hi guys,
AppStore shows update available but nothing happens after clicking update - I am running Yosemite Public Beta 2 on a 2nd partition on my Macbook Air, Partition has 5.8GB of free space left - could it be this is too less or what is the issue here?
Thanks!

After deleting some files update installed - conclusion Yosemite Public Beta 3 requires minimum ±6GB of free space

Max OS X Yosemite public beta

Dear Microsoft,
Could you tell me or guide me to a link following the known compatibility between Remote Desktop and Mac OS X Yosemite public beta? I cannot try myself because I need to have a minimum of information about this before updating Mac OS X to Yosemite. I use
Remote Desktop for my everyday tasks.
Thank you very much,
Greg

Hi,
Quote from the article,
Getting Started with Remote Desktop Client on Mac.
Devices running OS 10.6.8 and newer are supported.
Thanks.
Jeremy Wu
TechNet Community Support

Can I restore Yosemite Public beta from Time Machine with Mavericks bootable recovery drive

I had Yosemite beta running on an SSD in my Mac Book Pro. This drive has failed and is no longer recognized. I do have a Time Machine backup of this drive. When I restored it to a new SSD it would not boot.(formatted to MAC OS Extended (Journaled) with a single GUID partition) I do not have a Yosemite recovery drive. My question is, can I boot to the SSD using the Mavericks recovery USB drive and do a full restore of my Yosemite drive from Time Machine? I am unable to re-download the Yosemite beta as my code has already been redeemed.

Yes, this did work. I booted to the Mavericks recovery drive and pulled the backup off of Time Capsule and resolved the issue.

I can't upgrade to Yosemite public release from Public Beta 2

I'm currently running Yosemite public beta 2. When I try to upgrade to Yosemite public release, The app store is saying the following
We could not complete your purchase.
A newer version of OS X is already installed on this computer. Are you sure you want to download OS X 10.10?
The options are "Learn more" or "Ok"
OK does nothing.
Checked the purchase tab, Public Beta 4 is available for download.
Kindly help

Try logging out of the App Store, restart the Mac, log in again. That might clear it.

I don't get OSX public beta updates

Hi. I'm participating in OS X Yosemite public beta program. I've installed beta access utility on my Mac but updates don't show in the appstore. What can I do?

You will need to contact Apple as we are not allowed to discuss beta software here (and wouldn't know the procedures Apple has in place).

Yosemite 10.10.3 Public Beta Feedback Assistant Attachment

Yosemite 10.10.3 Public Beta (14D105g) has come out and I downloaded. I tried to fill the Feedback Assistant with Auto Generate sysdiagnose file from System Diagnostic on the Feedback Assistant application. However, when I click Submit, it says that one of the attached files exceed 100MB in which the limit of the file being sent. The sysdiagnose file that I got from Auto System Diagnostic is 108MB and I can't sent any Feedback. Is there a way to overcome this because I can't send feedback without sysdiagnose file. And the file is exceed the maximum size of file attached.

You can't discuss betas on this forum...
try- developers.apple.com

Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards

IOS 9 public beta

Just so those interested are aware the public beta for iOS 9 was deployed yeterday. Users can sign up at beta.apple.com. You need to install a profile on your phone and the update is downloaded OTA Ensure you make a full backup to iTunes before installing the update just in case. This is the same version as those in the developer program, includes Apple Music and the new News app (though this is prone to crashing from reviews available at the moment).

I tried to do it, but for some reason I get stuck in a loop when logging in, it accepts my credentials and returns me back to the same log-in page.
The iTunes back ups are working, from what I understand is people are upgrading then deciding on a full restore at which point the original backup cannot be used as it comes from an earlier version of iOS, the backup created will only work with the iOS version installed on the users phone when competing the backup.
There are ways to revert back to iOS 8.4 at the moment anyway (though not earlier as Apple have stopped signing 8.3).
If you do this and are considering a restore for a fresh phone afterwards it is recommended to run another backup after the installation of 9 so that the backup can be used with 9.

My trial version calls itself Public Beta 4?????

Install went fine. I thought I would try a set of 126 RAW files. I used the "standard previews" option. It took a long time, apx 5 minutes, for thumbs to start appearing. When working on the first photo the changes were not reflected in the preview but later ones showed up fine. Hmmmm. Actually the changes showed up in the first one when I clicked on a subsequent shot. Really wierd.
Have I got the right version? I had previously only worked with jpegs in beta 1.0 so can't really compare. In the "about" it calls itself "public beta 4" That doesn't seem right for the trial version that I just downloaded today. What do you think?

I went to http://www.adobe.com/products/photoshoplightroom/
and clicked on the "try it for 30 days" button. Looks pretty official. What version does yours say when you click on "about?" In my "add/remove software" section it lists it as version 1.00.0000. I really hope that somehow I got the wrong version cause this one isn't working well at all.

Public Beta? Documentation? API Reference? Sample Code?

Dear Adobe:
Is this beta just for testing existing code to see if the new player version breaks our existing code?
Or is this beta intended as a public beta to allow developers to use the new capabilities in FP11/AIR3?
Based on the release announcement stating "Introduces features" it seemed like it was intended to allow all interested developers to access the new APIs. If this is true, can an Adobe employee explain what a "beta" of FP11/AIR3 means without documentation or code samples? Or, if docs and/or samples are public can you reply on this post with the links?
I do see the link on the Features page for "Stage3D APIs (`Molehill`) for Flash Player". I would very much appreciate if you could add a similar link for a page with details on "H.264/AVC SW Encoding for Camera" :-)
Best regards from the lead on a loyal developer team chomping at the bit to build great solutions using the new FP11/AIR3 capabilities.
Best regards,
g
P.S. Following are related, prior and still unanswered posts:
http://forums.adobe.com/thread/877323
http://forums.adobe.com/thread/877452

Here's what I've heard from one of our community managers regarding stage3d:
"Thibault Imbert posted a discussion of what Stage3D is all about back then at http://www.bytearray.org/?p=2555. NJ also posted a more beginner level discussion of what it is all about at http://www.rictus.com/muchado/2011/02/28/demystifying-molehill-part-1/. Assuming they actually do intend to use these low level API’s (which I doubt most people will want to or have the ability even to do so), a site called iFlash3D covered it in great detail in a two part series discussing the ins-and-outs of AGAL (http://iflash3d.com/shaders/my-name-is-agal-i-come-from-adobe-1/ and http://iflash3d.com/shaders/my-name-is-agal-i-come-from-adobe-2/) as well as a reference card for AGAL http://iflash3d.com/site/agal-reference-card-available/. Or another that discusses how to manage cameras in a 3D space http://iflash3d.com/flash3d-coding/flash-3d-molehill-cameras/. Beyond those sites, most people aren’t discussing the details of the Stage3D api’s for a general audience that I have found."
I asked about the other new features (audio compression, surround sound, video encoding, etc.) but they hadn't seen anything created yet. However, they are interested in getting content developed for these areas and will work on getting that done. Look for third party resources and ADC updates in the near future.
Thanks,
Chris

Photoshop CS6 public beta is available on labs. Please use the CS6 forum for feedback

The public beta of Photoshop is available on http://labs.adobe.com/technologies/photoshopcs6/
Please direct all discussions/feedback on the matter in the proper forum:
http://forums.adobe.com/community/labs/photoshopcs6?view=discussions
And do read the multiple FAQs on the topic that are already posted in the relevant sub-forum:
http://forums.adobe.com/community/labs/photoshopcs6/faq?view=discussions

john worthington wrote:
Liquify Smart Object support was added in a update/dot release to CS6. I don't remember which one. Also we are currently investigating a possible bug where Liquify Smart Objects from older Photoshop psd files may not be recognized correctly in the latest version of Photoshop.
Can you find out for sure on which version? Seems strange, that CS6, no matter where it came from, wouldn't be sync'ed as far as version. I understand features coming out for PHotoshop CC, that would go forward and not be in CS6, but it seems that CS6 should be CS6 and be sync'd for features and version numbers no matter where you got it from.
If you got CS6 from CC....and you quit CC....does that version of CS6 quit functioning or does it work still going forward if you stop paying the CC monthly rent?
Thanks in advance,
C

Transferring data from my time machine after system software update, but my computer seems to be stuck on "create your account"

Have just been uploading snow leopard as the pre step to getting lion and have been transferring data from my time machine, but my computer seems to be stuck on "create your account"

I found a solution!
Perhaps this is just temporary, but I have my display up and working again.
Although the symptoms are different were a bit different, the solution here worked:
http://apple.stackexchange.com/questions/120259/grey-screen-after-login-blue-scr een-of-death-from-cmdr
As I was able to connect to my HD via an external monitor, in the finder, I went to:
1. Macintosh HD --> System --> Library --> Extensions
2. From there I moved all of the files that started with ADM and ATI (19 in total for me) to a folder on my desktop. (You will need to enter your admin password for this)
3. Next was a restart.
4. Then my display started working again.
5. After that, I transferred the files back into my Extensions folder.
6. I then did another restart with my fingers crossed and breath held. It worked.
Also... During the last few days of trying to find a fix, I restored a Mavericks backup to my computer away from Yosemite.
I'm very sure this problem occurred when I put my MBP to sleep, disconnected the power in its sleep, while something was connected to a USB port and unplugging the USB device (for me an iPhone charger) while the MBP was closed.
I hope this helps the next person.

Public Beta Question

Hello There,
If I install the Public Beta version of Yosemite on a separate partition, will I be able to see the files on the original partition on the new partition?
If this does not make sense, let me know.
Thank You
J Mahone

Hi Kappy,
So just to confirm, when I am running the Yosemite Partition, I can gain access to the files on the Mavericks Partition without having to restart.
Thank You

I seem to be stuck Yosemite public beta 2

Similar Messages

Maybe you are looking for