I seem to have disabled an ipad - is it possible to reverse this

I seem to have disabled my ipad - is it possible to reverse this?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Similar Messages

  • I've just downloaded an update to my Flash player and it seems to have disabled all video function on my Macbook. Any advice?

    I've just downloaded an update to my Flash player and it seems to have disabled all video function on my Macbook. Any advice?

    Hi MamaTabs,
    If you are having issues signing in to iCloud on your Windows machine, you may find some of the troubleshooting in the following article helpful:
    iCloud: Account troubleshooting
    http://support.apple.com/kb/ts3988
    Also, you may want to make sure that you are running the most recent version of iCloud Control Panel for Windows:
    Apple: iCloud Control Panel 3.1 for Windows
    http://support.apple.com/kb/dl1455
    Regards,
    - Brenden

  • I have disabled my ipad and havent hooked it to a pc before , how do I restore it?

    i have disabled my ipad and haven't hooked it to a pc before , how do I restore it?

    You would need to install on your PC if you haven't done so already, then follow this steps to restore Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • Hi there Hope someone can help me here. I am currently on holidays and my Kids have disabled my iPad so I now have to sync with my computer. I don't have my computer handy and want to use my device over the next few weeks if possible so can anyone help me

    Hi there
    Hope someone can help me here. I am currently on holidays and my
    Kids have disabled my iPad so I now have to sync with my computer.
    I don't have my computer handy and want to use my device over the next few weeks
    if possible so can anyone help me please
    Thanks
    Darren
    iPad 2 Wi-Fi + 3G, iOS 6.0.2

    You need a computer.
    Suggest you goto the nearest Apple Reseller and ask them to help you.

  • HT1212 i have disabled my ipad and i have no computer help please

    i have disabled my ipad and i dont have a computer please help

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks

    Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks Ben  [email protected]

    Hello Trevor
    Thanks for your message. You can custom set pages but there are no preset of page sizes like A4, A3, ect. I cannot click the size preference, nothing comes up
    Ben

  • On my Mac OS X ver10.4.11 my Sync is disabled can anyone tell me how to reverse this?

    On my Mac OS X ver10.4.11 my Sync is disabled can anyone tell me how to reverse this? I am not able to sync my iCal with anything. My computer is a Power PC G4.

    Alan,
    Try How to Reset the Sync History.

  • I have Photoshop Elements 3, is it possible to install this on my PC-computer (Windows 7 Professionell)?

    I have Photoshop Elements 3, is it possible to install this on my PC-computer (Windows 7 Professionell)?

    Thank you for answer.
    When I try, I get the message
    "This program has known compatibility issues. Sure if there is any
    workaround
    is available online at the Microsoft Web site. If no solution is found,
    automatically appears a website that shows what you can do. Photoshop
    Elements
    3.0 is not compatible with this version of Windows. "And then I dare not
    continue.
    How do I find out my computer's "IT geek factor"?
    // Gun.
    Mylenium skrev den 2014-08-17 09:59:
    >
          I have Photoshop Elements 3, is it possible to install this on
          my PC-computer (Windows 7 Professionell)?
    created by Mylenium <https://forums.adobe.com/people/Mylenium> in
    /Downloading, Installing, Setting Up/ - View the full discussion
    <https://forums.adobe.com/message/6647505#6647505>

  • I seem to have fried my iPad 1

    Actually it's my wife's iPad that I seem to have fried .....
    Whilst syncing to her MacBookPro, the iPad got into a weird loop where it kept asking if I wanted to transfer the purchases made on the iPad to iTunes, I'd say yes, it would go away and do it then come back and ask the question again. It was also reverting the apps/pages layout that we were fine tuning for her.  Anyway, at some point I was doing a software update and pulled the wrong USB cable by mistake ....  big oops apprently !!
    At first no matter what I did, I could only get the apple logo to show.  Holding down the power button for 10 seconds does not bring up the power slider, holding both does nothing, holding both for 30 seconds then letting go the power button does nothing more than cycle through black screen and apple logo ....
    I seemed to have got the correct sequence of events including pluging it into the mac whilst holding the home button or something like that so that I now have the connect to itunes logo on the front screen of the iPad.  The problem now is that even when I try and restore the iPad to factory settings, iTunes goes away and does some stuff, the iPad seems to recycle and even shows the apple logo with a progress bar (empty) but then itunes eventually comes back (after "waiting for the iPad" for a few minutes) with an error that says;
    "The iPad "iPad" could not be restored. An unknown error occured (9).  When I hit the "More Information" button, I get sent to an Apple Website that reccomends a whole set of procedures that I have followed twice now, without any more progress.
    I have been scouring google from top to bottom trying to find a way to reload the firmware from scrathc, but I end up at Jailbreak options that I am not comfortable with.
    My git feeling is that I have messed up the firmware .....  any help out there?
    Thanks in advance
    RIchard

    Paul cb.  I get the same error message (9), which relates to an apparent dropping of the USB connection.  I have now tried 3 different usb cables on 2 different mac's, same result.
    Reading as much as I can understand, there appears to be a dependance on an SHSH signature file. I have never Jailbroken any of my apple hardware, but there is much information that can be gleaned from the associated writings.
    I am not a genius my any means, but it appears as though (iMhO) that somehow the files (or some of them) on the iPad have become corrupted and the all important SHSH file is not there. This causes iTunes to have no reference point for restoring the iPad.  Also, it is not possible to force a new firmware (Option click restore in itunes) without an SHSH file, this results in an error that says that the iPad is not eligible for this version ...  or something like that.
    MY problem is that in Dubai we do not have an Apple Genius bar and that you guys and gals are the closest I will get to an Apple Genius.  The iPad was purchased for me in the States when my daughter was visting there so, I am pretty much sitting on a brick right now ...  (my wife has annexed my iPad 2 until I can fix her iPad 1 ....  sighs).
    Unless there are any other tactics that you guys can suggest (without Jailbreaking) then I think I may be at the end of the road ..
    Thanks for all your help and suggestions.
    Best Regards
    Richard
    /Riger

  • I have disabled my ipad and i cant connect it to itunes what do i do?

    i have dissabled my ipad and i dont know how to connect to itunes to restore it!!:(((

    If you forgot the passcode and that is why it is disabled ....
    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    Instructions can be found here.
    http://support.apple.com/kb/ht1212
    You will probably need to restore using Recovery Mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • My ipod 4 g types on it own? seems to have happened after the latest  update anyone else encounter this?

    Litterally can't type or hit any app correctly on my  ipod touch, cleaned the screen, restored to factory, used a stylus, nothing works, dont even have to be touching the screen, anyone else experience this?

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Also, see here  >  http://support.apple.com/kb/ts1827

  • HT1212 I have disabled my ipad!

    I had forgetton my password and the i tried it numerous amount of times and it is now disabled forever, today i went on itunes to try and restart it and it will not let me restart it or do anything with it how do i fix it?

    Recovery Mode Step by Step
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    On Computer
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. iPad Recovery Mode on computer screen
    8. Select "Restore iPad"...
    9. Select "Restore and Update"
    10. Extracting Software.
    11. Preparing iPad for restore.
    12. Waiting for iPad.
    13. Verifying iPad restore...
    14.Restoring iPad software.
    15. Verifying iPad software.
    16. Verifying iPad Restore...
    17. Restoring iPad firmware...
    18. Your iPad is restored to factory settings; keep iPad connected to computer
    19. Activate iPad
    20. Enter Apple ID and Password
    21. Continue
    22. Welcome to Your New iPad
    (a) Set up as new iPad   (b) Restore from this backup (select from list of backups)
    23. Restore from this backup
    24. Continue
    25. Restoring iPad from backup
    26. The settings of your iPad have been restore; keep iPad connected to computer
    27. Syncing iPad (Step 1 to 5)
    28. Preparing apps to sync
    29. Copying 1 of 9
    30. Sync apps, movies and music to iPad
    31. Finishing syncing
    32. Eject iPad

  • Updating to Firefox 5 seems to have disabled Mastercard Secure and Verified by Visa

    On one laptop I run Vista Home Premium 32 bit and on the netbook I run XP.
    When upgrading to Firefox 5, I have found (as I fgound when I upgraded to 3.something from 3.5 - I think - that was the first time I noticed any porbelms at all) that certain websites won't function any more; On the laptop with Vista, Firefox hangs up and won't load any of the Mastercard Secure or Verified by Visa pages nor will it allow me to sign in to my National Lottery account.
    Yet I can do all this - using the same broadband connection - on my netbook running XP.
    Is there a solution to this apparent conflict with Vista?
    Yet I can do all this

    Make sure your system software is up to date.
    Click the Apple  menu (top left in your screen) then click:  Software Update ...
    Safari / Preferences - Autofill. Click the Edit button next to: Other forms. Click: Remove All / Done.
    Check Safari / Preferences - Extensions. If you have any installed, turn that off, quit then relaunch Safari.
    Try disabling plugins...  Safari / Preferences - Security. Quit then relaunch Safari. See if that makes a difference. If it does, troubleshooting help http://support.apple.com/kb/TS3230?viewlocale=en_US

  • IPod software upgrade seems to have disabled my iPod

    I plugged my iPod in and got asked if I wanted to update to the latest software. I clicked sure so now my iPod is apparently at version 1.2.2. Now none of my music or podcast show up on the iPod. I tried clicking the Synch and it chatted for a while then said it was done. Still no songs or podcasts. Based on the amount of memory available it looks like all my music is still on the iPod.
    I guess I can restore but it but I should not have to do that. Either way I wanted to let someone know that tis may be a bug.
    Thanks,
    Joel

    wow, im GLAD my ipod wouldnt update... it kept saying "the file is corrupt" so i came here to remember how to fix that (its happened b4)... but after reading this im just gona keep with the old version... besides it cant be that good of an update.
    and to answer your question... "I wonder why Apple of all people would choose not to support a MS OS" ...its because apple *** *** through a straw and i only trust them with my music. not only that... but they seem like a company that doesent like to look back because im sure your ipod would be fine if you got a new computer with their newest operating system (whats it called leprosy? or leapfrog?... something like that)
    too bad you cant just upgrade... nope! that would void your waranty!!!!
    lolz

  • HT201269 I have disabled my ipad and it is asking to connect with ITunes when I connect it with ITunes it tells me it cannot connect as it is locked and I cannot get in to the ipad to try again? help

    please help my ipad is disabled and it is asking me to connect to Itunes and I still cannot unlock it?

    Try Recovery Mode.
    Read this: http://support.apple.com/kb/ht1808
    Follow the instructions very carefully.

Maybe you are looking for

  • Flash professional cc won't open??

    hello! i recently returned to flash with an interest in animation and was surprised to find that adobe had changed a lot since i last used their programs (flash cs5). i downloaded adobe creative cloud, and installed flash professional cc, under a fre

  • B1 and SQL Server 2005 performance with 3.000.000 invoice-lines per year

    I would like to know if SAP Business One with SQL Server 2005 could work with the following information: - 40.000 Business Partners - 40.000 Invoices per month - Aprox. 3.000.000 invoice-lines per year Of course it will be necessary to change some fo

  • HOW TO creat  BAR CHART using ABAP Programming

    DEAR ALL, I want some help as to how to creat GRAPHICAL display using ABAP programing (BAR CHART) any sample codes Example will be very helpful. Regards, VJ

  • Renew Skype number before it expires?

    How can I renew my Skype number a month or so before it's up for expiration? Want to do it now while I just got paid and can't figure out how. Thanks!

  • Oracle 10g Express Service not starting Database

    I have a fresh download and install or Oracle 10gExpress and am having issues when I manually start the OracleXE service. The OracleXE Service starts, but the database does not. The error I see is ora-12560. The database and service stops correctly i