I seem to have some kind of virus. When I use the internet a pop up consistently comes up when I click any link, and on Facebook I get new ads put next to people's photos.

I need to know how to remove this virus for free.

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Similar Messages

  • I have a Time capsule with 2 laptops using the internet wireless from it.

    My desktop is wired to the Time capsule and it allows me to access the internet but my laptops cannot access the internet.  I have reconnected everything but nothing seems to work.  Any suggestions?

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Power-up the modem; wait at least 10-15 minutes.
    Power-up the base station; wait at least 5-10 minutes.
    Power-up your computer(s).
    In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

  • I have no longer been able to connect to the internet as aiport continueously tells me that "airport has selfassigned ip address and will not be able to connect to the internet.

    Up until about a week ago I have not had a single internet connectivity problem.  Then, all of the sudden airport will no longer connect and it keeps telling me that "Airport has self-assigned IP address and will not be able to connect to the internet." I did not change any settings, I didn't touch anything and all of the sudden it just will not connect anymore.  Any help would be appreciated. Thanks!:)

    These steps often sort out this problem...
    System Preferences > Network
    Select the AirPort from the left hand side
    Click on the Locations combo box and select Edit Locations...
    Click on + to add a new location, call it "Home" (or anything else you prefer)
    Click on Advanced
    Select the AirPort tab and enter your network name
    Select TCP/IP tab. 
    Configure IPv4 Using DHCP
    Now click on Renew DHCP Lease.  After a few seconds you should get an IP address (probably 192.168.x.x)
    Click on Proxies tab.
    Select Auto Proxy Discovery and Use Passive FTP
    Click on OK and Apply, etc.
    Bob

  • Have some kind of virus or trojan horse -- dozens of spam messages are being sent out from my PC. Is there anything I can do?

    The messages do not show up in my Sent folder. Many of them are sent to dead email addresses and the only way I know that this is happening is from the "failure to deliver" messages from the Mail Administrator.

    General Malware SCAN for your System
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Create a new profile as a test to check if your current profile is causing the problems.
    *https://support.mozilla.org/en-US/kb/profiles-tb
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Thunderbird
    *http://kb.mozillazine.org/Profile_Manager

  • Hi I seem to have lost my email? when I click on the email icon at bottom it does not open??

    Help

    Did this happen in relation to a system update? Or some other activity? or "just because"?

  • Why do I have grey 'Mac' window bars when a document is floating, and how do I get rid of them?

    This is really annoying, as I'm used to working with the new black 'tabbed' look, but I find my PS now looks like this screen grab. How do I switch back to the black tabbed look for floating windows, rather than the Mac traffic lights?

    I have Photoshop CC 2014 in Yosemite as well.
    If your Interface Preferences have "Open Documents in Tabbed Windows" checkmarked, it should do that without fail unless you uncheck the Application Frame ((under Window menu in PS) in which case documents open in Windows.
    Floating document windows will always have the gray bar, no matter the Color Theme you choose in Photoshop unlike Windows 7.
    However if you go in Mac System Preference > General and choose "Graphite" under appearance, it will turn off the "traffic light" look and leave you with gray/white window control buttons.
    If you minimize Photoshop in Windows, both PS and the Document Window will minimize, but in the Mac version, you can independently minimize the document window and the PS app. As far as I can see, there is nothing malfunctioning. Each OS has its' own way.
    Gene

  • For some reason every time i try to open a new tab the only way i can open one is by right clicking a link and clicking open in new tab, does anyone know why this is and how i can fix it?

    i've tried CTRL + T, clicking the + sign in the tab bar, and going to file + new tab. nothing has worked

    The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Evidently something in that extension isn't compatible with a Firefox security fix. Disable that extension or un-install it.

  • Have a mac book pro and it has some kind of virus which opens unrelated windows. What do I do?

    have a mac book pro and it has some kind of virus which opens unrelated windows. What do I do?

    You may have installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Very slow MacBook Pro. Probably some kind of virus.

    Hey guys,
    I'm helping a friend of mien to repair her computer. Yesterday she wanted to watch a film online and on one of this sides she even clicked on updating her flash player. Afterwards the Mac didn't work anymore and after a restart continued  very slow and she probably has some kind of virus. Even writing this text takes forever because the computer is so slow.
    I've already done a system check with etrecheck and also tried to find the virus with avira. But this you also see in the report.
    So It would be great if anyone could help us.  
    Problem description:
    Very slow Mac. Probably some kind of virus.
    EtreCheck version: 2.0.11 (98)
    Report generated 21 de Novembro de 2014 às 11:26:42 GMT-2
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,1
      1 2.3 GHz Intel Core i7 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      Color LCD 1440 x 900
      NVIDIA GeForce GT 650M - VRAM: 512 MB
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 3:30:18
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500,11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (196.06 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.avira.antivirus.general.agent.plist Support
      [loaded] com.avira.antivirus.ipm.ui.plist Support
      [loaded] com.avira.antivirus.notifications.agent.plist Support
      [loaded] com.avira.antivirus.odscan.default.plist Support
      [loaded] com.avira.antivirus.scheduler.agent.plist Support
      [running] com.avira.antivirus.systray.plist Support
      [loaded] com.avira.antivirus.telemetry.agent.plist Support
      [loaded] com.avira.antivirus.update.default.plist Support
      [running] com.vsearch.agent.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [invalid?] com.adobe.SwitchBoard.plist Support
      [failed] com.avira.antivirus.dbcleaner.plist Support
      [loaded] com.avira.antivirus.ipm.loader.plist Support
      [running] com.avira.helper.watchdox.plist Support
      [running] com.perion.searchprotectd.plist Support
      [loaded] com.skype.skypeinstaller.plist Support
      [invalid?] com.vsearch.daemon.plist Support
      [invalid?] com.vsearch.helper.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [failed] com.facebook.videochat.[redacted].plist Support
      [invalid?] com.genieo.completer.download.plist Support
      [invalid?] com.genieo.completer.update.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [invalid?] palmall-1-2.ver Support
      [invalid?] palmall-1-2_updater.plist Support
      [invalid?] palmall-1-2_updater.sh Support
    User Login Items: ℹ️
      iTunesHelper Aplicação (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Skype UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      AdobePDFViewer: Version: 10.1.1 Support
      Default Browser: Version: 537 - SDK 10.9
      DirectorShockwave: Version: 12.0.7r148 - SDK 10.6 Support
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    User Internet Plug-ins: ℹ️
      ConduitNPAPIPlugin: Version: 1.0 - SDK 10.6 Support
      Picasa: Version: 1.0 - SDK 10.6 Support
      TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
    Safari Extensions: ℹ️
      Omnibar
      Conduit Search for Safari
      PalMall 1.2
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Tuxera NTFS  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          13% Avira
          6% WindowServer
          3% savapi
          1% uxipm_ui
          1% avguard-ondemand-mgmt
    Top Processes by Memory: ℹ️
      322 MB savapi
      305 MB avbackendproxy worker (avguard-license)
      133 MB Google Chrome Helper
      120 MB avbackendproxy worker (update)
      116 MB Google Chrome
    Virtual Memory Information: ℹ️
      889 MB Free RAM
      1.62 GB Active RAM
      766 MB Inactive RAM
      772 MB Wired RAM
      1.84 GB Page-ins
      11 MB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

    Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

    Hi Tech5Apple,
    Thanks for visiting Apple Support Communities.
    If you continue to see unexpected behavior when accessing the iTunes Store, the troubleshooting steps in this article can help:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    All the best,
    Jeremy

  • IMovie seems to have developed a glitch. When i try to import photos they show in the timeline but not in the movie.

    iMovie seems to have developed a glitch. When i try to import photos they show in the timeline but not in the movie.
    Any ideas?

    You are probably looking in the wrong place - all photos in Photo view and in event too unless you have a corrupted library
    most common cause of your not finding them is bad sort - view menu ==> sort events
    Nest most common cause is a bad data/time on the camera - this can be corrected using a smart album to find the photos from that camera and then using using the adjust time/date command to fix the bad ones
    YOu can alwasy find the event a Photo is in by selecting it and selecting show event
    LN

  • Some kind of virus has gotten into my browser that will cause it to go automatically to a new, unwanted webpage after a few seconds.

    Sometimes when I click on a link, the browser will go to that page for about a second and then will automatically go to a new (unwanted) webpage. When I use Firefox's "go back" button, a splash screen will appear asking me if I really want to leave that page. Sometimes it will take me back and stay and at others it will go revert to the new, unwanted page. The unwanted page is different each time and generally look to be real pages but random. Also, sometimes when I click a link, Firefox opens a second browser window with a random page. This happens several times throughout the day. It will happen both with some of my standard bookmarks that I use all the time and also with new urls. Most of the time it seems to be random but does happen more with some links than others. Is this a new virus?

    Do a malware check with some malware scan programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

  • TS3988 I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

    I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

    Welcome to the Apple Community.
    You need to turn the services you want to sync (calendars, contacts etc) on on both devices from settings > iCloud.

  • I have seemed to have picked up a virus and now i get a prompt to buy Mac Defender to clean up my computer.  does this sound legit?

    i have seemed to have picked up a virus and now i get a prompt to buy Mac Defender on line.  does this sound legit?  i'm not even sure where the virus may have come from.

    No,Tim, it's a scam Trojan.
    Google Search:
    http://www.google.com/search?client=safari&rls=en&q=Mac+Defender&ie=UTF-8&oe=UTF -8
    Apple Search:
    https://discussions.apple.com/community/mac_os/search.jspa?peopleEnabled=true&us erID=&containerType=&container=&spotlight=true&q=Mac%20Defender

  • Some Kind of huge Noise coming from the Disc Drive while inserting and ejecting the disc.

    Some Kind of huge Noise coming from the Disc Drive while inserting and ejecting the disc.
    i have just purchased it before a couple of days a go.

    I just installed a Mac Pro for a client. After a while I noticed this buzzing everyones talking about. It was especially bad after I installed two more internal drives. It seemed to come and go with HD activity. I pulled up the lever on the back of the machine when it was particularly loud and the buzzing went away. So like some others have noticed it's associated with the HD bays. I took the side off and adjusted the seating of the drives so they were exactly centered Now the buzzing is gone. I'll keep an eye on it. Maybe it will need some kind of silicone bumpers where the bay trays are metal to metal.
    More research to come.
    Richard

Maybe you are looking for

  • Why does JDBC make me commit a query?

    I was working with two DB2 database connections, A and B, and performed the following logic: Turned off AutoCommit for A and B Updated A Updated B Committted A Rolled back B Selected from A Selected from B Updated A Committed A Closed Connection A Cl

  • Problem sybcing movies

    I'm having a syncing issue. I manually sync ATV and for some reason, the movies I have recently purchased directly on atv are not showing up in my itunes menu so I can't watch them on my imac. However, if I purchase on my computer and then sync the m

  • Abap querry

    Hi, Can anyone provide me any documents on ABAP Querry. I need to modify one sap standard program on abap querry urgently, any help in this regard will be very much appreciated. Thanks. Lokesh.

  • Message cancellation

    Hi;    Please don't ask how this happened; it is something I would prefer to forget!!  We are on XI 3.0 and we have 5,432 XML messages in our DEV environment that are in the status "Scheduled for outbound processing" and should never be processed.  

  • Album artwork & ipod

    I've downloaded the latest version of iTunes (on 28 Jan 2007) and want to programme it so that album artwork shows on my iPod. I've followed all the instructions I can find but they all tell me to check the box saying "display album artwork on iPod".