I set an alarm with Siri. Can she only set one at a time, and how can I see/cancel it?

Title. I set an alarm, then shortly after asked her to set another alarm.
1) are both alarms in effect?
2) where can I see/cancel them? It says it can't modify or delete them.

Go to the Clock app and see if they are listed.  I just set two via Siri on my iPad and both are listed. I can turn them off or deleted (via edit button) the alarms.

Similar Messages

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • I have Photoshop Elements 12. When I open the program, the tools, menu, everything is teeny tiny. Can barely read it. What's wring and how can I rectify it?

    I have Photoshop Elements 12. When I open the program, the tools, menu, everything is teeny tiny. Can barely read it. What's wring and how can I rectify it?

    lianemily777 a écrit:
    Thanks MichelBParis
    The display resolution allows a user to set according to pixels I think, eg 3200 x 1800. So which setting is considered normal? It does not have a "normal field.
    You are right.
    Before HiDpi displays became available three years ago, you could find advice about what was the good resolution for displays, depending on their size in in/cm and viewing distance.
    - For relatively big displays (22" to 30") a pixel resolution of 1920 x 1200 or 1920 x 1080 was considered optimal.
    - For big laptops or small desktop, 1680 x 1050 or 1640 x 900 were good.
    In Windows, you could set the size of fonts to full resolution or 25% or 50% bigger... if the software supports this feature, which was not the case with Photoshop, Elements... The size of the fonts was deternined and fixed in the software itself, with no way to scale the fonts. The solution needed Microsoft to provide developpers with new programming interfaces and the solution for developpers was to rewrite a substantial part of the code.
    Anyway, to enable good viewing of characters on common 12 or 13" HiDpi displays, you need to use the fonts at 200%.
    And that makes sense. To see the same characters on a 12" display the same as on a 24", they must be twice the size... good rule of thumbs.

  • On my new iPad under the space category it shows I have 5.5gb occupied by 'Other" data - Can you tell me what this is exactly and how can I reduce it Thank-you

    On my new iPad under the space category it shows I have 5.5gb occupied by 'Other" data - Can you tell me what this is exactly and how can I reduce it
    Thank-you

    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
     Cheers, Tom

  • Why does my computer play strange music at random times and how can I stop it?

    why does my computer play strange music at random times and how can I stop it?  The music isn't anything on my machine and the only way I can switch it off is to reboot.  Can anyone advise me please.  It's driving me nuts ... I don't even like the music it's playing!

    What apps are open and are you really still only on 10.5.1??????? At the very least please update your profile, also please remember to post more information. I suspect it's something going on with just your user account. You can verify that by creating another user account (call it TEST ACCOUNT) and log into that account and test. Once this has been verified then you will need to check which apps are running to determine what is causing your issue.

  • When I connected my iPhone 6 to my iMac to download new photographs they were downloaded in .aae format. How can I change them back to jpg? And how can I get jpg in future?

    When I connected my iPhone 6 to my iMac to download new photographs they were downloaded in .aae format. How can I change them back to jpg? And how can I get jpg in future?

    Sync the apps to the iPod via iTunes. Make sure that the apps are chaec to syc and the proler boxes checked in the Apps pane for the iPod in iTunes.

  • I have a cirkel with a lock up in rigth corner,what is it,and how can i take it away?

    I have a cirkel with a lock,up in rigth corner of my Iphone.What is that and how can I take it away?

    Double click the home button, swipe to the right until you see the play controls for music, right next to it is the icon for the screen orientation lock. Tap on it to unlock the screen again, your icon in the right corner will be gone.
    tap on the home button to close the multitask bar again.
    Message was edited by: Ingo2711

  • I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

    Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • Help with : How Can I know the schedule for a JOB, and How Can I Change?

    Hi
       I have a job and I know the name...I review in table TBTCO and I saw that this jobs is schedule at 11:00 AM and at 4:00 PM, but I need to change the schedule for this job..and that this job will execute al least four times during the day...I don´t know how can I change the schedule??
        I was thinking that if I  run the transaction directly I can run, Im not sure, because I try to do in QAS environment... I when I try to run the program..the system doesn´t do anything..this mean I cant execute with F8, such as if I should be complete a parameter, but all the fields are completed.
         Thank you for your help, I promese that I will gice you points for your help.
    Alice

    Thank you at all.
    I was reviewing the options that you send me, but Im confused about... if its possible edit the schedule that this job has in this moment, because if I enter the transaction SM36 or try to see SM37..in production environment I can´t see this schedule...
    And Im not sure to do the correct steps to create something new... in QAS environment..I can´´t see this job.
    All of yours help are really important
    Thank you again!
    Alice

  • How can change the hair to an image every time and how can save the edit image into albums give me code

    HI, I am small iphone developer,i have one problem in my app,please give the guidence to me.
    THIS IS MY PROBLEM:
              I HAVE SELECTED ONE PICTURE FROM ALBUMS OR TAKE PICTURE FROM CAM SO I WANT TO CHANGE THE HAIR STYLES PART WITH ANOTHER HAIR STYELS AND SAVE THE PICTURE INTO ALBUMS HOW CAN GENRATE THE CODE OR LOGIC TO ME......I AM TRYING IT FROM 3WEEKS SO COULD YOU PLEASE GIVE ME GUIDENCE TO ME.................

    HI, I am small iphone developer,i have one problem in my app,please give the guidence to me.
    THIS IS MY PROBLEM:
              I HAVE SELECTED ONE PICTURE FROM ALBUMS OR TAKE PICTURE FROM CAM SO I WANT TO CHANGE THE HAIR STYLES PART WITH ANOTHER HAIR STYELS AND SAVE THE PICTURE INTO ALBUMS HOW CAN GENRATE THE CODE OR LOGIC TO ME......I AM TRYING IT FROM 3WEEKS SO COULD YOU PLEASE GIVE ME GUIDENCE TO ME.................
    Sir I am did it by using Objcetive-C code in iphone as fallows
    demoprojectViewController.h
    #import <UIKit/UIKit.h>
    @interface demoprojectViewController : UIViewController<UIImagePickerControllerDelegate,UINavigationControllerDelegate >
        UIImageView *imageView,*editingimage,*maskimage;
         UIButton *takePictureButton;
        UIButton *selectFromCameraRollButton;
        UIView *myview;
    @property(nonatomic,retain)IBOutlet UIImageView *imageView;
    @property(nonatomic,retain)IBOutlet UIImageView *maskimage;
    @property(nonatomic,retain)IBOutlet UIImageView *editingimage;
    @property(nonatomic,retain)IBOutlet UIButton *takePictureButton;
    @property(nonatomic,retain)IBOutlet UIButton *selectFromCameraRollButton;
    @property(nonatomic,retain )IBOutlet UIView *myview;
    - (IBAction)getCameraPicture:(id)sender;
    - (IBAction)selectExistingPicture;
    -(IBAction)pickHair:(id)sender;
    -(IBAction)done;
    -(IBAction)back;
    @end
    demoprojectViewController.m
    #import "demoprojectViewController.h"
    @implementation demoprojectViewController
    @synthesize imageView,editingimage,maskimage;
    @synthesize takePictureButton;
    @synthesize selectFromCameraRollButton;
    @synthesize myview;
    CGFloat lastScaleFactor = 1;
    CGFloat netRotation;
    CGPoint netTranslation;
    NSArray *images;
    int imageIndex = 0;
    - (void)didReceiveMemoryWarning
        // Releases the view if it doesn't have a superview.
        [super didReceiveMemoryWarning];
        // Release any cached data, images, etc that aren't in use.
    #pragma mark - View lifecycle
    // Implement viewDidLoad to do additional setup after loading the view, typically from a nib.
    - (void)viewDidLoad
       // maskimage=[[UIImageView alloc]initWithFrame:CGRectMake(50, 50, 150, 150)];
        //maskimage.image=[UIImage imageNamed:@"1.png"];
        if ([UIImagePickerController isSourceTypeAvailable:
              UIImagePickerControllerSourceTypeCamera]) {
            takePictureButton.hidden = NO;
            selectFromCameraRollButton.hidden = NO;
           UITapGestureRecognizer *tapGesture =
            [[UITapGestureRecognizer alloc]
             initWithTarget:self
             action:@selector(handleTapGesture:)];
            tapGesture.numberOfTapsRequired = 1;
            [maskimage addGestureRecognizer:tapGesture];
            [tapGesture release];
            UIPinchGestureRecognizer *pinchGesture =
            [[UIPinchGestureRecognizer alloc]
             initWithTarget:self
             action:@selector(handlePinchGesture:)];
            [maskimage addGestureRecognizer:pinchGesture];
            [pinchGesture release];
            ///---rotate gesture---
            UIRotationGestureRecognizer *rotateGesture =
            [[UIRotationGestureRecognizer alloc]
             initWithTarget:self
             action:@selector(handleRotateGesture:)];
            [maskimage addGestureRecognizer:rotateGesture];
            [rotateGesture release];
            //---pan gesture---
            UIPanGestureRecognizer *panGesture =
            [[UIPanGestureRecognizer alloc]
             initWithTarget:self
             action:@selector(handlePanGesture:)];
            [maskimage addGestureRecognizer:panGesture];
            [panGesture release];
            //---swipe gesture---
            images = [[NSArray alloc] initWithObjects:
                      @"1.png",
                      @"2.png",
                      @"3.png", nil];
            //---right swipe (default)---
            UISwipeGestureRecognizer *swipeGesture =
            [[UISwipeGestureRecognizer alloc]
             initWithTarget:self
             action:@selector(handleSwipeGesture:)];
            [maskimage addGestureRecognizer:swipeGesture];
            [swipeGesture release];
            //---left swipe---
            UISwipeGestureRecognizer *swipeLeftGesture =
            [[UISwipeGestureRecognizer alloc]
             initWithTarget:self
             action:@selector(handleSwipeGesture:)];
            swipeLeftGesture.direction = UISwipeGestureRecognizerDirectionLeft;
            [maskimage addGestureRecognizer:swipeLeftGesture];
            [swipeLeftGesture release];
        [super viewDidLoad];
    -(IBAction) handleTapGesture:(UIGestureRecognizer *) sender {
        if (sender.view.contentMode == UIViewContentModeScaleAspectFit)
            sender.view.contentMode = UIViewContentModeCenter;
        else
            sender.view.contentMode = UIViewContentModeScaleAspectFit;
    -(IBAction) handlePinchGesture:(UIGestureRecognizer *) sender {
        CGFloat factor = [(UIPinchGestureRecognizer *) sender scale];
        if (factor > 1) {
            //---zooming in---
            sender.view.transform = CGAffineTransformMakeScale(
                                                               lastScaleFactor + (factor-1),
                                                               lastScaleFactor + (factor-1));
        } else {
            //---zooming out---
            sender.view.transform = CGAffineTransformMakeScale(
                                                               lastScaleFactor * factor,
                                                               lastScaleFactor * factor);
        if (sender.state == UIGestureRecognizerStateEnded){
            if (factor > 1) {
                lastScaleFactor += (factor-1);
            } else {
                lastScaleFactor *= factor;
    //---handle rotate gesture---
    -(IBAction) handleRotateGesture:(UIGestureRecognizer *) sender {
        CGFloat rotation = [(UIRotationGestureRecognizer *) sender rotation];
        CGAffineTransform transform = CGAffineTransformMakeRotation(
                                                                    rotation + netRotation);
        sender.view.transform = transform;
        if (sender.state == UIGestureRecognizerStateEnded){
            netRotation += rotation;
    //---handle pan gesture---
    -(IBAction) handlePanGesture:(UIGestureRecognizer *) sender {
        CGPoint translation =
        [(UIPanGestureRecognizer *) sender translationInView:maskimage];
        sender.view.transform = CGAffineTransformMakeTranslation(
                                                                 netTranslation.x + translation.x,
                                                                 netTranslation.y + translation.y);
        if (sender.state == UIGestureRecognizerStateEnded){
            netTranslation.x += translation.x;
            netTranslation.y += translation.y;
    -(IBAction) handleSwipeGesture:(UIGestureRecognizer *) sender {
        UISwipeGestureRecognizerDirection direction =
        [(UISwipeGestureRecognizer *) sender direction];
        switch (direction) {
            case UISwipeGestureRecognizerDirectionUp:
                NSLog(@"up");
                break;
            case UISwipeGestureRecognizerDirectionDown:
                NSLog(@"down");
                break;
            case UISwipeGestureRecognizerDirectionLeft:
                imageIndex++;
                break;
            case UISwipeGestureRecognizerDirectionRight:
                imageIndex -- ;
                break;
            default:
                break;
        imageIndex = (imageIndex < 0) ? ([images count] - 1):
        imageIndex % [images count];
        imageView.image = [UIImage imageNamed:
                           [images objectAtIndex:imageIndex]];
    #pragma mark -
    - (IBAction)getCameraPicture:(id)sender {
        UIImagePickerController *picker =
        [[UIImagePickerController alloc] init];
        picker.delegate = self;
        //picker.allowsImageEditing = YES;
        picker.sourceType = (sender == takePictureButton) ?
        UIImagePickerControllerSourceTypeCamera :
        UIImagePickerControllerSourceTypeSavedPhotosAlbum;
        [self presentModalViewController:picker animated:YES];
        [maskimage removeFromSuperview];
        [picker release];
    - (IBAction)selectExistingPicture {
        if ([UIImagePickerController isSourceTypeAvailable:
             UIImagePickerControllerSourceTypePhotoLibrary]) {
            UIImagePickerController *picker =
            [[UIImagePickerController alloc] init];
            picker.delegate = self;
            picker.sourceType = UIImagePickerControllerSourceTypePhotoLibrary;
            [self presentModalViewController:picker animated:YES];
            [maskimage removeFromSuperview];
            [picker release];
        else {
            UIAlertView *alert = [[UIAlertView alloc]
                                  initWithTitle:@"Error accessing photo library"
                                  message:@"Device does not support a photo library"
                                  delegate:nil
                                  cancelButtonTitle:@"Drat!"
                                  otherButtonTitles:nil];
            [alert show];
            [alert release];
    #pragma mark -
    - (void)imagePickerController:(UIImagePickerController *)picker
            didFinishPickingImage:(UIImage *)image
                      editingInfo:(NSDictionary *)editingInfo {
        imageView.image = image;
        [picker dismissModalViewControllerAnimated:YES];
    - (void)imagePickerControllerDidCancel:(UIImagePickerController *)picker {
        [picker dismissModalViewControllerAnimated:YES];
    - (IBAction)btnSave_Clicked:(id)sender;
        UIImageWriteToSavedPhotosAlbum(editingimage.image, nil, nil, nil);
        //UIImageWriteToSavedPhotosAlbum(imageView.image, nil, nil, nil);
        UIAlertView *alert = [[UIAlertView alloc]initWithTitle:@"Success" message:@"Image saved successfully to iPhone photo albums..." delegate:nil cancelButtonTitle:@"Ok" otherButtonTitles:nil];
        [alert show];
        [alert release];
    -(IBAction)pickHair:(id)sender;
           //[maskimage setMultipleTouchEnabled:YES];
       // [maskimage setUserInteractionEnabled:YES];
        //[maskimage setContentMode:UIViewContentModeScaleAspectFit];
        maskimage.image=[UIImage imageNamed:@"1.png"];
        [imageView addSubview:maskimage];
    -(IBAction)done
        NSLog(@"hiafjdkfj");
        UIGraphicsBeginImageContext(imageView.image.size); 
        CGRect rect1 = CGRectMake(netTranslation.x,netTranslation.y,maskimage.image.size.width , maskimage.image.size.height);
        CGRect rect = CGRectMake(0, 0, imageView.image.size.width, imageView.image.size.height);
        [imageView.image drawInRect:rect]; 
        [maskimage.image drawInRect:rect1]; 
        UIImage *resultingImage = UIGraphicsGetImageFromCurrentImageContext(); 
        UIGraphicsEndImageContext(); 
        [editingimage setImage:resultingImage];
        [myview addSubview:editingimage];
        [self.view addSubview:myview];
    -(IBAction)back
        [myview removeFromSuperview];
        //[editingimage removeFromSuperview];
    -(void) touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
        UITouch *touch = [[event allTouches] anyObject];
        CGPoint location = [touch locationInView:touch.view];
        maskimage.center = location;
    -(void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event {
        [self touchesBegan:touches withEvent:event];
    - (void)viewDidUnload
        self.imageView = nil;
        self.maskimage=nil;
        self.takePictureButton = nil;
        self.selectFromCameraRollButton = nil;
        [super viewDidUnload];
        // Release any retained subviews of the main view.
        // e.g. self.myOutlet = nil;
    - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceO rientation
        // Return YES for supported orientations
        return (interfaceOrientation == UIInterfaceOrientationPortrait);
    - (void)dealloc {
        [imageView release];
        [images release];
        [takePictureButton release];
        [selectFromCameraRollButton release];
        [super dealloc];
    @end
    but i can not put the hair to the proper place means on edit image when am saving the image please help meee

  • Why do my photos on my computer take up 5.5 GB but syncing them to my iPod Touch they take up around 15 GB, and why can I only select one folder to sync, and not multiple folders?

    I have wiped the iPod a few times and tried from different computers. All the small things get more frustrating every day with apple.

    DrNicT61 wrote:
    I'm a little confused how that would help the problem I have...care to explain it a little differently?
    The Camera roll, on the iPod Touch, is where photos taken by the iPod (if it has a camera), screenshots and downloaded pictures are stored. Since they have "originated" on the iPod they are not on your computer - yet. So the total size of the photos on your iPod (in your case 15GB) will be made up of photos you have synced from your computer (5.5GB) and the Camera Roll of 9.5GB.
    In the Photos App, notice the line named Photo Library (I mentioned it in my previous post). That folder contains all the photos synced form your computer. If there is an extra line above the Photo Library, named Saved Photos, this is the Camera Roll and it is where those screenshots, downloaded pictures and camera shots are listed.
    Cruicially, if you ever need to Restore your iPod, the Camera Roll (Saved Photos) will be deleted, so you may wish to save the contents of the Camera Roll onto your computer. My method is; when the iPod is connected to iTunes, look in My Computer for an extra drive (it should show an iPod icon) and copy them from there to a folder on my computer. If I want them on your iPod, I paste them into one of the folders I intend to use for Syncing with the iPod. Once they have been successfully saved, I can go back the My Computer/the iPod and delete them from the Camera Roll.

  • HT4314 We have one appleid user account and have created two game center logins,  but can now only access one...any idea how to be able to access the other

    We have one appleid and have created two game center login names under that one apple id.  now we can only access one of the logins.  does anyone know how to get to the other account

    This is to avoid piracy. What could happen is, people could buy music, and give it away for free online. Usually it is then you buy a complete album off iTunes that it will only be available on one device. It is tied to that account, and the device must be registered to that account to listen to it.

  • I am looking at a web page with highlighted words that are links that open new windows. I don't even click on them and they upen as I pass over them accidentily with the cursor. extremely annoying!what is it called and how can I remove this 'feature'

    it is usually one highlighted word that when touched, opens up a small window of related companies or info or websites that I might be interested in. one word "presenter" was highlighted, touched it with my cursor, and I think caught a damaging virus.

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
    Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.

  • HT4528 If iPhone bought at Verizon is it unlocked so I can use put an Italian SIM card in and how can I use the phone as a hotspot

    I bought iPhone at Verizon-is it unlocked so I can put in an Italian SIM card in when I am traveling there. Can I use the iPhone as a hotspot?

    No.
    If a 4S, Verizon must unlock the GSM portion which then can be used with another carrier's SIM card outside of the US.
    Being able to tether the iPhone is carrier dependent.

  • I have two ipads on the same itune account. one ipad is lost. the one which is lost is not registered on mobileme.thus i can track only the one which is registered . so how to find the other onewhich is a wifi 3g.please advice

    Hi,
        I have two ipads. both are registered on the same itunes account.one has a mobile me connection .the other one is not with mobile me. but this one is a wi-fi+3g. i have lost the second ipad. how to find it or lock it or erase it. i do have the imei no and also the serial no.....thanks

    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
     Cheers, Tom

Maybe you are looking for

  • Registration of Acrobat to a new laptop

    I installed Acrobat Pro on one laptop on 3/16/12.  The laptop crashed, I've purchased a new one and would like to download the existing copy onto my new laptop.  How do I do that without purchasing another copy of Acrobat?

  • Ichat rarely connects, when it does, video quality is poor for one side

    Hi, I'm using Ichat v4.0.8. When trying to enter a video chat, it rarely connects just says no information has been sent for 10 seconds etc etc. If you persist and keep trying over and over it will eventually connect. The person on the other side can

  • SAP Note 1558066 needed !!

    Hello Experts, I am having a issue with WAD and i need SAP Note 1558066 in order to solve this issue. Can anyone help me for this note ? any sugession, any comments how to get this note ?  Many many thanks in advance.. Please help. Regards, Sunil Pat

  • Remove HTML Tags and parse the text out of it

    Hi All - I had a text file with all the HTML Tags on it. I want to parse text out of it. Is there any package available to remove all the HTML Tags from the text. For example <HTML><BODY bgColor=#ffffff> This is the text i want to parse.</BODY></HTML

  • Encore CS6 problème de menu

    Bonjour, J'ai un spectacle avec 5 marques de chapitres sur PPRO CC exporté en Mpeg DVD sur EncoreCS6. Dans le menu encore, la rubrique "lire tout le film" s'arrête au 1er chapitre. Lorsque je fais une liste de diffusion de chapitre, je peux tout lire