I set my cRIO from 'DHCP' to 'link local' and lost contact with it.

I set my cRIO from 'DHCP' to 'link local' and lost contact with it.
I changed the setting at the placed labeled "2" to link local only, then I think I hit save at "3". Then poof, I had no network contact with my cRIO.
I tried;
Hitting the reset button
Opening a closing MAX
Going to safe mode
Throwing the Reset IP switch
Power cycling the cRIO
Running cat 5 cable directly from the Host to my target
None of it worked, and I have no contact with my cRIO.
This is what MAX looks like now. How can I fix this?
Solved!
Go to Solution.

Make sure to disable the firewall on your computer.
Otherwise you can check through the steps in this documentation:
http://digital.ni.com/public.nsf/allkb/ABE4BC247E8AC9BC8625734E005CAB42
Note specifically that one option is to read the console out from the target VIA the serial port will a null modem cable during boot and it will indicate what IP the system is using.
Craig H. | CLA | Systems Engineer | National Instruments

Similar Messages

Setting sbRIO IP address without using link-local

Hello
I am working deployment of an image to sbRIO in production. Deploying the image works well, but setting up the sbRIO so that i can actually deploy the image does not. In production the deployment will deal with brand new sbRIO cards, so they will connect as DHCP/link-local.
The setup i have does not allow me to:
- Set the IP properties of the sbRIO manually.
- Set the host computer IP properties to DHCP/link-local
- Use a switch with DHCP
So at this point i can find the sbRIO with the System Configuration VI's. I can download the image to the sbRIO (if i manually set the IP address to static on the same subnet as the host). But i can not connect to the sbRIO with the System Configuration VI's unless i change the host computer IP settings, and so i cant set the IP settings on the sbRIO so that they match the host.
However, MAX seems to be able set the IP settings on the sbRIO just fine no matter if its using link-local or not. So it should be doable.
Does anyone have experience with this? How does MAX do it?
Ideally i would like to:
-Connect the (new) sbRIO
- Discover it (link-local)
- Set a static IP
- Write image
I also wonder if anyone else have seen strange behaviour in MAX when interacting with a sbRIO on a network card with multiple IP addresses? And if so, can it be fixed? In my case new IP settings doesnt settle on the sbRIO unless the (host) network card has max one IP address.
/ Nimgaard

Ok, there are two different settings that involve DHCP, one being the public IP address that is assigned to the AirPort and the other being the IP addresses that are assigned to the computers on the private network.
Before doing the following, I would hard reset the AirPort Extreme by holding the reset button on the back for 5-10 seconds, just so we can get a default onfiguration.
If you run AirPort Utility, go to Manual Setup, and click on Internet your Connection Sharing at the bottom should be listed as Share a Public IP Address. This enables your AirPort to be the gateway and to receive a public IP address from your cable provider. This should really already be enabled since you did a hard reset.
Now test to make sure you have an internet connection. If not, then you need to reset your cable modem. If after resetting your cable modem you still can't get internet connection then you need to call your cable provider and have then do whatever they need to do to get you a new IP address.
Now that you have a working internet connection you need to setup your private network. Run AirPort Utility, click on Manual Setup, and go to the Internet tab again. Write down the DNS servers you see listed. For Configure IPv4, you need to change the setting from Using DHCP to Manually. Enter the IP address as 192.168.249.10, the subnet mask as 255.255.255.0, the router address as 192.168.249.10, and then use the DNS Servers you just wrote down.
Now click on the DHCP tab next to the Internet Connection tab and select 192.168.249.100 as your beginning DHCP address. Ending address could be something like 192.168.249.200. Update your AirPort and then see if things are working correctly.

Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10?

Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10? We have a remote desktop farm setup with 2012 R2 servers and we are publishing some web links that only work with IE10. As a result, we need to
downgrade the remote desktop servers to IE10. I have a feeling that this isn't possible, but if I could get a definitive answer, I would greatly appreciate it, thank you!

Hi,
Agreed with DonPick.
Internet Explorer 11 is preinstalled with Windows 8.1 and Windows Server 2012 R2.
More information regarding Internet Explorer 11, please check:
Internet Explorer 11 - FAQ for IT Pros
http://msdn.microsoft.com/en-us/library/dn268945.aspx
Best regards
Michael Shao
TechNet Community Support

How do I remove the previous owner's Apple ID from my 2nd hand iPhone, and replace it with my Apple ID?

How do I remove the previous owner's Apple ID from my 2nd hand iPhone, and replace it with my Apple ID?

settings - appstore - view id - log out and log in with your id.

Bought a new iphone and i cant activate it unless the previous owner deletes the account from their icloud but i lost contact with the previous owner how can i fix this?

bought a new iphone and i cant activate it unless the previous owner deletes the account from their icloud but i lost contact with the previous owner how can i fix this?

Take it back where you got and and get your money back.
As has been pointed out, if there was a "previous owner", the phone is not "new". Thephone you purchased is most likely stolen. If whoever you bought it from won't give you your money back, turn it over to the police.

I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial

I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial # be enough to show it is a mini server and under warrantee be enough to get it back?

If it's not listed in Purchases, check that it's hidden, and if so, unhide it > http://support.apple.com/kb/HT4928 After that, go to Purchases and download OS X Server.
If you can't download it, contact with the Mac App Store support > http://www.apple.com/support/mac/app-store/contact

I downloaded Mountain Lion from being on Snow Leopard and lost my entire Office 2004 suite, including Entourage which was my main email server. If I download Office 2008, will I retrieve all my lost Entourage email folders?

I downloaded Mountain Lion from being on Snow Leopard and lost my entire Office 2004 suite, including Entourage which was my main email server. If I download Office 2008, will I retrieve all my lost Entourage email folders?
Other options?

It's not that simple. You didn't lose your Office 2004 suite. Office 2004 won't run in Mountain Lion. You need to update your Office software. You need to purchase either Office 2008 or 2011. Either one can run in Mountain Lion.

Can the 12 Ports of the PCI 6508 set independent from each other to I and O?

Hello,
can the 12 Ports of the PCI 6508 set independent from each other to I and O?
Or are they configured in groups like A, B and C ports?
Thanks,
BFutzi

The attached example demonstrates how to write a digital pattern to multiple ports with a single write call, overcoming the 32-line limitation of the DIO Port Write VI.
Attachments:
Write_to_Multiple_Ports_(6507-6508).vi ‏49 KB

How to Bind a Combo Box so that it retrieves and display content corresponding to the Id in a link table and populates itself with the data in the main table?

I am developing a desktop application in Wpf using MVVM and Entity Frameworks. I have the following tables:
1. Party (PartyId, Name)
2. Case (CaseId, CaseNo)
3. Petitioner (CaseId, PartyId) ............. Link Table
I am completely new to .Net and to begin with I download Microsoft's sample application and
following the pattern I have been successful in creating several tabs. The problem started only when I wanted to implement many-to-many relationship. The sample application has not covered the scenario where there can be a any-to-many relationship. However
with the help of MSDN forum I came to know about a link table and managed to solve entity framework issues pertaining to many-to-many relationship. Here is the screenshot of my application to show you what I have achieved so far.
And now the problem I want the forum to address is how to bind a combo box so that it retrieves Party.Name for the corresponding PartyId in the Link Table and also I want to populate it with Party.Name so that
users can choose one from the dropdown list to add or edit the petitioner.

Hello Barry,
Thanks a lot for responding to my query. As I am completely new to .Net and following the pattern of Microsoft's Employee Tracker sample it seems difficult to clearly understand the concept and implement it in a scenario which is different than what is in
the sample available at the link you supplied.
To get the idea of the thing here is my code behind of a view vBoxPetitioner:
<UserControl x:Class="CCIS.View.Case.vBoxPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:v="clr-namespace:CCIS.View.Case"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
d:DesignWidth="300"
d:DesignHeight="200">
<UserControl.Resources>
<DataTemplate DataType="{x:Type vm:vmPetitioner}">
<v:vPetitioner Margin="0,2,0,0" />
</DataTemplate>
</UserControl.Resources>
<Grid>
<HeaderedContentControl>
<HeaderedContentControl.Header>
<StackPanel Orientation="Horizontal" HorizontalAlignment="Right">
<TextBlock Margin="2">
<Hyperlink Command="{Binding Path=AddPetitionerCommand}">Add Petitioner</Hyperlink>
| <Hyperlink Command="{Binding Path=DeletePetitionerCommand}">Delete</Hyperlink>
</TextBlock>
</StackPanel>
</HeaderedContentControl.Header>
<ListBox BorderThickness="0" SelectedItem="{Binding Path=CurrentPetitioner, Mode=TwoWay}" ItemsSource="{Binding Path=tblParties}" />
</HeaderedContentControl>
</Grid>
</UserControl>
This part is working fine as it loads another view that is vPetioner perfectly in the manner I want it to be.
Here is the code of vmPetitioner, a ViewModel:
Imports Microsoft.VisualBasic
Imports System.Collections.ObjectModel
Imports System
Imports CCIS.Model.Party
Namespace CCIS.ViewModel.Case
''' <summary>
''' ViewModel of an individual Email
''' </summary>
Public Class vmPetitioner
Inherits vmParty
''' <summary>
''' The Email object backing this ViewModel
''' </summary>
Private petitioner As tblParty
''' <summary>
''' Initializes a new instance of the EmailViewModel class.
''' </summary>
''' <param name="detail">The underlying Email this ViewModel is to be based on</param>
Public Sub New(ByVal detail As tblParty)
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Me.petitioner = detail
End Sub
''' <summary>
''' Gets the underlying Email this ViewModel is based on
''' </summary>
Public Overrides ReadOnly Property Model() As tblParty
Get
Return Me.petitioner
End Get
End Property
''' <summary>
''' Gets or sets the actual email address
''' </summary>
Public Property fldPartyId() As String
Get
Return Me.petitioner.fldPartyId
End Get
Set(ByVal value As String)
Me.petitioner.fldPartyId = value
Me.OnPropertyChanged("fldPartyId")
End Set
End Property
End Class
End Namespace
And below is the ViewMode vmParty which vmPetitioner Inherits:
Imports Microsoft.VisualBasic
Imports System
Imports System.Collections.Generic
Imports CCIS.Model.Case
Imports CCIS.Model.Party
Imports CCIS.ViewModel.Helpers
Namespace CCIS.ViewModel.Case
''' <summary>
''' Common functionality for ViewModels of an individual ContactDetail
''' </summary>
Public MustInherit Class vmParty
Inherits ViewModelBase
''' <summary>
''' Gets the underlying ContactDetail this ViewModel is based on
''' </summary>
Public MustOverride ReadOnly Property Model() As tblParty
'''' <summary>
'''' Gets the underlying ContactDetail this ViewModel is based on
'''' </summary>
'Public MustOverride ReadOnly Property Model() As tblAdvocate
''' <summary>
''' Gets or sets the name of this department
''' </summary>
Public Property fldName() As String
Get
Return Me.Model.fldName
End Get
Set(ByVal value As String)
Me.Model.fldName = value
Me.OnPropertyChanged("fldName")
End Set
End Property
''' <summary>
''' Constructs a view model to represent the supplied ContactDetail
''' </summary>
''' <param name="detail">The detail to build a ViewModel for</param>
''' <returns>The constructed ViewModel, null if one can't be built</returns>
Public Shared Function BuildViewModel(ByVal detail As tblParty) As vmParty
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Dim e As tblParty = TryCast(detail, tblParty)
If e IsNot Nothing Then
Return New vmPetitioner(e)
End If
Return Nothing
End Function
End Class
End Namespace
And final the code behind of the view vPetitioner:
<UserControl x:Class="CCIS.View.Case.vPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
Width="300">
<UserControl.Resources>
<ResourceDictionary Source=".\CompactFormStyles.xaml" />
</UserControl.Resources>
<Grid>
<Border Style="{StaticResource DetailBorder}">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="Auto" />
<ColumnDefinition Width="*" />
</Grid.ColumnDefinitions>
<TextBlock Grid.Column="0" Text="Petitioner:" />
<ComboBox Grid.Column="1" Width="240" SelectedValuePath="." SelectedItem="{Binding Path=tblParty}" ItemsSource="{Binding Path=PetitionerLookup}" DisplayMemberPath="fldName" />
</Grid>
</Border>
</Grid>
</UserControl>
The problem, presumably, seems to be is that the binding path "PetitionerLookup" of the ItemSource of the Combo box in the view vPetitioner exists in a different ViewModel vmCase which serves as an ObservableCollection for MainViewModel. Therefore,
what I need to Know is how to route the binding path if it exists in a different ViewModel?
Sir, I look forward to your early reply bringing a workable solution to the problem I face.
Warm Regards,
Arun

HT5312 I forget the answers of security questions and i don't have rescue email how can i reset security questions, especially that i don't have a support from apple in my country lebanon to contact with

I forget the answers of security questions and i don't have rescue email how can i reset security questions, especially that i don't have a support from apple in my country lebanon to contact with

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
How to Manage your Apple ID: Manage My Apple ID

I set my 3gs up as a new phone and lost all off my contacts is there a way of getting them back?

Well i was told by an apple guy at the store to restore my phone as a new one to remove al bugs. so i did and lost all of my contacts so i am trying to find out if i can find my contacts somewhere on my computer so i can re-enter them.

If you had previously configured to sync Contacts with outlook, google or yahoo contacts, you can do the same to recover your contacts.
Otherwise two options:
Restore from backup. Right click your iPhone under 'Devices' on iTunes left Pane and select 'Restore from Backup'. Pick the old backup date and restore. But then this will bring back your old issue you had on your iPhone.
The other option is to use a third party software to extract info from your backup folder.
iPhone Backup Extractor, you can download a free version with limited capability of a paid Registered version:
http://www.iphonebackupextractor.com/
Here are locations of your backup folder.
Win7 - C:\Users\<username>\AppData\Roaming\Apple Computer\Mobile Sync\Backup
Vista - C:\Users\<username>\AppData\Roaming\Mobile Sync\Backup
Winxp- C:\Documents and Settings\<username>\Application Data\Apple Computer\Mobile Sync\Backup

Upgraded from ios4 to ios 6 and lost all apps i had downloaded and some photos?

I upgraded an ipad2 from ios4 to ios 6 and once all was done, all my apps, purchased and free ones were gone - and some of my pictures. Any idea? I do not dare doing another "resore backup" ... Any help?

A few comments:
You will eventually be able to retrieve all your apps. You will be able to go to the App Store on your iPad, click "Updates" in the lower right, click "Purchased" and re-download them from there (but be careful - download them one at a time).
It sounds like the reason the photos and apps did not appear is you may have run out of memory on the iPad. The new iOS offers more features, and is somewhat bigger than the old. Check Settings > General > Usage and see how much space you have left and what the big space consumers are. You should do housekeeping to get an absolute minimum of 10% of the space on your iPad free. For example, if you have a 16GB iPad, you would need absolutely no less than 1.6GB free.
You said "I do not dare doing another restore ...". On the contrary, you should update your iOS at every opportunity to avoid these giant updates such as you just did. You went from iOS 4 to 6, which means it's been over a year and a half since your last update. If you did them more frequently, they would be less dramatic.

I shifted my itunes music from C: drive to D: and lost all data on ratings/plays etc

I shifted my itunes data from C: drive to D: drive on my Windows Vista laptop. I also updated itunes. Now while I have the music intact, the historical data including ratings/date of download/no of times played is all lost. Even though I did not delete any file from my comp. I have the data intact on my ipod classic (2005 model) by if I sync it now itunes would delete that data too and update it with that on the itunes where the history is lost. In effect even the history on ipod would get lost.
I am keen to retain it as it was developed painstakingly over 6 years.As the data is intact on ipod, pl help me transfer the same back to itunes

Well, having read a lot of misleading articles on the subject, I found out the solution about the missing "consolidate" option for myself. I started as per what seems to be standard advice and changed the current Library directory to my external drive in the Edit / Preferences / Advanced section of iTunes. I also ensured that the boxes next to Keep iTunes Media Folder Organised and Copy Files to iTunes Media Folder were checked. By the way, for simplicity's sake I'd already created a folder I named iTunes on the HD. I then highlighted (using my mouse) every track in the Library Music folder in iTunes and then right clicked this selection of 400+ songs. That then gave me the elusive "consolidate" command (amongst all the many other options) which I then selected. Much to my relief, iTunes then started the transfer process to my external drive. I was then able to close down iTunes and delete the iTunes Media files on my C: drive (knowing I could always restore them from Trash if everything went wrong) and thereby saved about 5 meg. I restarted iTunes and it works - all my music files are on my external drive and provided that's connected up I'm ok. I had one music video file and I moved that separately simply by highlighting it, right clicking on it to get access to the consolidate option and letting iTunes move it across.

Windows 2012 DHCP Failover "Lost contact with partner"

We have stood up a pair of Windows 2012 DHCP servers and configured DHCP failover (in Load Balancing mode) as per the Microsoft Technet article. The two servers are on the same subnet, and time is in sync between them. Almost immediately after
configuring scopes to failover, one node loses contact with the other, and the alternate node goes to failover mode "Recover".
We have restarted both servers and services. Both DHCP servers show as available. Clicking "Replicate Failover Scopes" completes successfully with no errors, and the only two warnings in the Event Log are about credentials for Dynamic
DNS updates and a dynamic IPv6 address (which we don't use at all.)
How come they can replicate, but have "lost contact"; and how do we get the one out of "Recover" mode?

You should see Recover state only if one of the DHCP server actually went down and came back up. In this case the server which comes back up would be in Recover state but will transition to Recover_Wait state and come back to Normal after it syncs it
leases. This should be relatively quickly. Did your servers continue to remain in the Lost Contact...\Recover state for long.
Did you see any events in the DHCP Server admin channel
Microsoft\Windows\DHCP Server\Admin.
You can also enable AuditLogs (Microsoft\Windows\DHCP
Server\AuditLogs) which logs all the server to server messages. You can enable the log by right clicking on
Microsoft\Windows\DHCP Server. View->Show Analytical and Debug Logs. This will show the
Microsoft\Windows\DHCP Server\AuditLogs in event viewer. You can then right click and enable the log and see if there are any failures
being logged there.

I connected my iPhone 4 to my MacBookPro to set up iCloud that is on my iPad and lost all my photos from my phone...where are they?

I have an iPhone 4, iPad2, and sync with MacBook Pro (Mac S X (10.7.2)

On the iPhone and iPad tap Settings > iCloud
Toggle Photo Stream off then back on then restart the devices.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
On the Mac open System Preferences > iCloud
Deselect the box next to Photo Stream, then reselect then restart the Mac.
Hopefully that willl sync the photos on all your devices.

I set my cRIO from 'DHCP' to 'link local' and lost contact with it.

Similar Messages

Maybe you are looking for