I set my ipod to reset all things, now all I see is USB cable and itunes
I am having problems with my computer, and I need help!
Something went wrong with your reset.
You are in Recovery Mode; follow the instructions to recover iPad.
http://support.apple.com/kb/ht4097
Similar Messages
-
I have just downloaded the latest update for itunes and now my ipod is not recognised and my ipod is showing a usb cable and itunes logo please help me.
Try the troubleshooting here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
My ipad won't charge. All I get is picture of white USB cable and iTunes Logo.
My ipad won't charge. I must admit, I did use it until there was only 2% power left and then went and plugged directly into power and not through PC... but it won't charge. All I get is picture of white USB cable, an arrow and the iTunes Logo. I have turned off and on again as previous posts but all I get is the picture of the USB cable, arrow and iTunes logo. Please help...
I have been relatively patient - 3 hours on charge but all it does is show picture of USB cable and itunes logo. It it were charging you would think that a picture of the charge would come up to indicate status of charge - wouldn't you think?
-
my iPod touch was frozen for a several hours and whe i hooked it up to iTunes, it has the USb cable and iTunes logo. ITunes says i need to unlock my iPod, but i can't do that if it has the logos and stuff...what do i do?
See Here
http://support.apple.com/kb/HT1808 -
My Ipod touch only shows a usb wire and itunes symbol when i turn it on. it does not show up on my itunes or in my computer. ive tried the troubleshooting stuff(reseting the ipod, reinstalling the newest itunes, restarting the computer) and nothing has changed. my ipod shuffle connects to my itunes just fine though.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
When my iphone was updating it operating software, the USB cable came out of the port. Now the screen will only show the USB cable and the itunes icon. It is not recognized by the itunes store. I unintalled the USB driver for the iphone, but it still does not work. I have turned off the phone and performed a reset.
Try another Reset, hold both Home and Power buttons until the iPhone restarts. This usually takes about 10 seconds of holding both buttons. If still problem you should Restore your iPhone with iTunes on computer. Here are simple steps. Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click Restore Button of iTunes.
-
I reset my ipod touch, and a picture of a usb cable and itunes image appeared, what does that mean?
please help me, i dont know whats wrong
This means your iPod is in recovery mode, try restarting the device agian (Hold the home + Power button for 10secounds), if the device goes back to this screen you will need to plugg it into your computer and most likely have to put all your content back on the device and restore from a backup
If you have any questions feel free to ask
Syther101 -
In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks
See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem. -
How do I set my IPod to play all my new podcasts continuously?
One possibility is to put them into a playlist in the desired order and then sync that playlist from your iTunes library to your iPod.
B-rock -
My iPod touch is not charging, nor is it syncing with my commputer and iTunes. It will charge on the wall charger, and in the car, but not on the computer. My wife's iPod Nano syncs on the computer. I went in and reset my iPod Touch back to factory settings and now it will not let me get in unless I sync to iTunes on my computer. Well, it still will not connect thru the USB cord. Does anyone know what I should do to get this corrected? I want my iPod back.
Have you seen and worked through the suggestions in this Apple support document?
iOS: Device not recognized in iTunes for Windows
If you have any questions about any of the steps, feel free to ask!
B-rock -
Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow pointing to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing appearing again. what sholud I do?
This is the solution to your issue.
I wish you the best of luck.
http://support.apple.com/kb/ht1808?locale=en_AU&viewlocale=en_AU -
HT1414 how do i get my ipod to work when all i get is a pic of a usb cable and an itunes logo
how do i get my ipod to work when all i get is a pic of a usb cable and an itunes logo
Connect the iPod to your computer and restore via iTunes.
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad -
My ipad mini refuses to join home wifi connection. It is trying to do so continuously but with no success. I tried to reset all settings. Switched wifi off and then back on. Nothing works. The rest of devices are fine with the wifi. What shall I do next?
Maybe reboot your router. Unplug it for about 30 seconds or so and then plug it back in. Reboot your iPad while the router is powering up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
HT4946 after i reset, all i see is connect to iTunes, but nothing happens after i do.
after i reset, all i see is connect to iTunes, but nothing happens after i do.
This should help:
iOS: Unable to update or restore -
itouch was updating software and failed, now all i have is a screen showing usb plug and itunes logo,cant reset or restore.help
Type "unable to restore" into the search bar at the top of this page by Support and read the resulting help article
Maybe you are looking for
-
What is memory.cpp at line 1038?
We have been running the same test in LabVIEW for a few years. Now all of a sudden, we are starting to get a memory.cpp error at line 1038. The test normally runs days at a time (~2 weeks), but we are getting this error after about 18-24 hours. Any i
-
I am upgrading software. I used to use MS Office Pro 2003--> now 2007. In converting documents from 2007 into Acrobat Pro 8.x, I was having a problem with the page numbers not getting converted properly. For example, I use Page x of y at bottom of
-
PDF printing with wrong colours
Hi, I have created a document in indesign 5 and have now converted to a PDF file, on screen all is well but when I print the file all the colours are changing in a big way. The file includes illustrator images, photoshop photographs and text from ind
-
1 ATA bus + 2 HDD's + 2 OS's = ?best possible config?
As I still use some desktop audio composition applications in OS9 (NOT Classic), but use OSX chiefly for typical domestic use (web, mail, itunes), I would like to know the best possible means of optimising my G4 Digital Audio for VST hard disc record
-
Hi! I have implemented a contract-first web service using Spring-WS, and would like to authenticate towards the OC4J JAZN Jaas security provider. Is it possible to integrate with JAZN by accessing the JAAS api directly? I have set up my own realm in