I set the clock but when lock the screen backworking to the first time to set
i have a problem whit my clock
Hi Go to Genral Settings Time & date Set Automatically to on Cheers Brian
Similar Messages
-
When syncing my iPad for the first time to my iTunes (which was in Australia at one time but no longer) my iPad defaulted to the Australian format for phone numbers and each contact listed was now an Australian address. My iTunes is set to the USA. How/Where do I change the setting? It also changes the default to Australia on each of my iTouches and iPhones.
Thanks!thanks for the help
-
Using a. Airport express to stream from iTunes. My Router is a Netgear type G. The express sets up fine and works the first time. When I try to use it at a later date after closing then reopening iTunes I have to physically reset the express and then go through the process of finding it again. Is this normal?
I have a 3rd generation (802.11n capable, 2.4Ghz only) airport express, my problem is that I've tried using it to extend my network and that brick wall, no matter how close I get the express to the room, the signal and throughput in that room becomes abysmal.
As you might imagine, brick is a lot like cement, and it will not allow much of the wireless signal through.
Regarding your Express, there is no such thing as a 3rd Generation model....yet. You likely have a 1st Generation AirPort Express. Check and confirm the Model No on the side of the Express. A 1st Gen model is A1264.
Here's my problem, I don't think the express supports "extending" a network from a wired network jack.
The Express can "extend" wirelessly, or using an Ethernet connection. The configuration for this is very simple, but post back if you need it.
The jack just seems to be shut off
Have you temporarily turned off the wireless on a laptop and tried to connect it using an Ethernet cable to the wall jack as a "test"?
If you can get a good Internet connection this way, then you know the Ethernet cabling and jack are working correctly.
On the other hand, if you cannot get an Internet connection on the laptop during this "test", then this indicates that the Ethernet cable or jack is not functioning correctly and the wiring will need troubleshooting before you can proceed any further.
I need to create a whole new wireless network in this room for this configuration to work?
AirPort Setup will take care of this for you automatically during the configuration of the AirPort Express.
If I have an apple TV connecting to the express and an AppleTV connecting to the extreme, will they both be visible when connected wirelessly to either network?
Yes
Will I be able to connect to my network seemlessly?
Yes
Post back after you have confirmed that the Ethernet cable and Ethernet jack are functioning correctly in the temporary "test" mentioned above. Then, we will continue. -
I recently wanted to update my phone and so when i put it in recovery mode and tried to set it up it said that i had to enter the apple id that i used to set up the phone the first time but i dont know the information to my old account what can i do?
You will need to remember or find the id that you used, without it you won't be able to re-activate your phone - if you are on the activation screen then does that show the first letter of the id and the email provider's name ?
Do you know if you have any of the account's downloads in computer's iTunes library - if you do then you can get the id form that : Recovering a forgotten iTunes Store account name.
If not then see if you can find it via http://appleid.apple.com : Apple ID: How to find your Apple ID. -
Hello everybody
I bought a new iPhone 4 with iOS 6.1.3 installed. When I connected it to itunes for the first time to activate it iTunes asked me to enter the password for an account that the iPhone is locked to like if the device was used before what shall I do? PLease reply soonI can't do that because the device was purchased from United Arab Emirates and I got it as a gift in Syria but the problem is that there is not even a single apple store in Syria so is there another way to fix that, I googled it and was told to jailbreak the device whitch I did and than hacktivated it but the problem is the device doesn't connect to any network and only shows "no service" and the battery draining too fast so is there any other way to fix this issue
-
I have bought an iPhone4 and to be able to use it for the first time I connected into a friends' itunes. Now when I want to buy itunes stuff on the phone it asks me her password. How can I set up again my itunes account?
Now I also have a macbook where I can sync my iphone but it doesn't allow mefirst of all only sync it with 1 computers itune account
second settings->general->store click the appleID box with her appleID in it and log out -
When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?
Go to Settings>General>Passcode Lock>tap Turn Passcode Lock Off, enter your "pin".
Edit: Are you saying you are getting a prompt for your email pin, or are you talking about the passcode lock that appears when you turn the phone on? -
Hi,
We have two GPO's with IE maintenance (Preference Mode Configured)
The settings it has are
1. Automatically detect configuration settings - Set to Enabled.
2. Automatic Browser configuration - Not configured.
We do not have proxy value set in IE through this GPO.
We have proxy set in IE through a third party tool (TPT) which updates the proxy at logon event 5 and 10.
Does Resetting Internet Explorer Maintenance settings from these GPO's also clear proxy set in IE by third party tool after the first GPO refresh.
I am sure the second time when the GP refreshes, the client won't find any IEM settings and hence there is no question of the proxy set in IE by TPT to erase. It is only the first time of the GPO refresh that I am concerned about.
Can someone please guide as I am planning to do the same in our production and concerned about the downtime caused due to the proxy being removed if at all for the first time.It will disable the proxy server option in Internet Options (untick the box), but will still store your proxy details.
Thanks
Ryan -
My Wife got an iPhone at work. IT set it up the first time on another machine, they finally install iTunes on her machine but I don't know if she can sync without loosing Photos, SMS, and other things. She had six months of stuff on that phone?
The problem is she can't update to new software until she connect to iTunes, but she don't want to loose all that info.
My question is:
If she register her apple ID on that new computer, and sync the phone, will she loose everything? or iTunes will back up first (because apple id match) and then sync.
Otherwise, how can I do it? The closest apple store is 3 hours away. thanks!Before you connect to a new PC, make sure that autosync is disabled in Edit/Preferences/Devices, otherwise her phone will be wiped during the following sync.
If she has data on the phone she wants to save, back up manually:
Disable autosync in iTunes, connect your phone to her new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing. Transfer the purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Transferring data is also covered here: http://support.apple.com/kb/HT4137 -
I have iMovie 10.0.4. I want to transfer some old DV tape videos to MPEG 4 files to be stored on a 4 TB external drive. I successfully imported the video to iMovie, created a project by moving all captured files into a project and the first time I shared the project to a file it worked as expected. Every subsequent try to transfer another video would fail to transfer. When I clicked save it gives the warning that it is too big for iCloud, iso I click create on this computer. The progress circle comes up with no indication of progress. The show activity drop down just says sharing to "file" no file name as in the first one and indicates no time remaining. In fact it just sits there apparently doing nothing. I'v tried it a half dozen times, deleted everything and started over. It transfers the first project to file and then nothing on additional tries. What do I have wrong, am I missing something?
In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"
-
i plugged in my iphone 4 for the first time to my computer to back everything up. but when i got to the screen to click on "new phone" or restore to the "same phone" i clicked "same phone by accident. now i have all of my old information from my G3s on my new iphone 4. how can i reverse this? please help.
Hi, raneth's boyfriend!
Unfortunately, iTunes was told to restore all data from an old backup onto the new phone, and that cannot be undone.
However, prior to this, iTunes 10 would have also asked to make a backup of the phone before doing the restore. If the user elects to say "yes" to perform the backup, then iTunes would have backed up the phone before erasing it.
Hopefully, that backup will still be available in iTunes, and if so, it would be backed up under the new phone's name prior to it being erased and restored (if the name of the new phone is different to the name of the old phone).
To check if iTunes has a backup of the phone prior to the restore, look in the Devices category in iTunes Preferences. All backups made are timestamped and are identified with the iPhone's name at the time of the backup. Look for:
• a backup of the phone using the new phone's name prior to the erase and restore, or
• a backup with the same date and time as that when the phone was erased and restored (not the date and time AFTER when the phone was erased and restored!). This may be the case if the new and old phones have the same name.
If a backup is available, you can erase and restore again using that backup. The phone will be restored with what would hopefully be the original image of the new phone.
If no backup was made prior to erasing and restoring the phone initially, then there is no way to
undo it, meaning your phone's original data has been lost.
--tonza -
My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?
See if this helps:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212 -
my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges
yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute -
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
Applications are mentioned free, but when we start downloading one dollar is charged in my credit card, but only for the first time when i switch on and use it for the first time one dollar is charged. and from next application it is free. why?
Kindly inform any email id or toll free number to contact apple for your below answer, Mr.King_Penguin
About receiving my credit card being debited for Free App Store Application downloads,
It should be within a few days, but it might vary a bit by bank/provider :
I am in India, if the bank don't refunds , what to do?
Rajagopal.pngr :- It is only a holding charge, it is not a permanent charge. If it isn't refunded within a few days or so (and it quite possibly won't be over a weekend) then you can query the charge with Apple.
Maybe you are looking for
-
Open/read a txt file on the client side in a Form server architecture
We are moving our software from client-server to Web architecture but we have problems with all the forms that use GET_FILE_NAME and TEXT_IO built-in functions. This commands, in fact, work on the application-server side and not on the client (browse
-
Every time I use Safari, or any other web browser on my mac, when I go to my yahoo mail or search on Google, the font formatting is all in bold. I don't know how to change this. Any ideas?
-
BBP_ITEM_CHECK_BADI for Category check
Dear Experts, I have to implement further checks based on the category during contract, requisition and order creation and update. The badi I looked was BBP_ITEM_CHECK_BADI. The problem is that I couldnt find the way to get the data on line: there i
-
I was updating my iPhone 3GS, left it overnight and woke up to find that there was an error and my IPhone could not be restored. What can I do to make my phone work again? Have I lost all the data?
-
MFBF - Enter WBS Element error
Dear All Flow is as follow. 0. While performing MFBF-Make-To-Order with Planned Order and Material as input field and save in component screen, I am getting error "Enter WBS Element". 1. Material is with Planning strategy: 85 2. Material is attached