I set up a new router and the windows machines have no problem with connectivity.  I go through the MacBook Pro's airport assistant and view my network and then enter the WPA2 password.  I get back a message saying the password is incorrect when it is

I set up a new router and the windows machines connect fine.  My MacBook Pro does not.  I go through the airport assistant and see the network yet when I enter the router WPA password I get a message back saying that the password is incorrect.  And, it isn't!  Very frustrating.  What can I do as I had the same problem after I tried to reinstall my last router.  Again, only on the Mac.  Thanks!

If you kept the same Base Station name and network name, that can confuse Keychain Access. Either change the Base Station and network name, or open Keychain Access Utility and delete any reference to your Base Station and network name. Make sure you delete from the Login and System keychains.

Similar Messages

  • When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server.  When I send to e-mail from another address, I get back an error saying the e-mail address is unknown.  My e-mail has worked fine for years until

    When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server.  When I send to e-mail from another address, I get back an error saying the e-mail address is unknown.  My e-mail has worked fine for years until yesterday.  HELP!

    The specific text of the error message is very important here — I'm not sure exactly you're encountering here.
    If you're able to connect to your email server and are able send email to other email addresses and if the failures are specific to one email recipient address, then please contact the intended recipient of the failing email, and confirm their address is valid.  (This is the way I'm reading your question.)
    If you are unable to send any email to any other email addresses and this is specific to your email address, then try the web mail client interface (if one is available) to verify your login user and password, and check with your email ISP for assistance.  If your email password works via web mail, follow this Apple troubleshooting guide, then — if everything else fails — I'd probably then entirely remove the email account from Mail.app and re-add it per your email ISP's particular setup requirements.  (Some issue with the setup or maybe a corrupt setting in OS X or a problem at the mail ISP servers is a common problem, but this effects attempts to send to all email addresses via that account.)
    An email account setup is specific to an email provider, unfortunately.   If you're using one of the more common email ISPs, then there are usually setup guides and frequently-asked questions posted online.

  • I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

    I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

    You need to be very careful which project you open in which version.
    For 2014 make sure its on 2014.1 build 81.

  • When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!

    When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!

    Which I get. But clicking on that link you provided does not give you the option of choosing between 32 and 64 bit installers.
    Yeah, that was certainly a 32-bit installer file being referred to in the other message, too. (The 64-bit installer file is called iTunes64Setup.exe.)
    Just in case it's an issue with your normal browser not working properly with the system-detection equipment on the page (there's a javascript control that checks for operating system specifics, and is supposed to deliver the correct Mac or Windows installers), let's try a different web browser for the download. If you use Firefox instead of IE (or vice versa), do you get offered an iTunes64Setup.exe instead of an iTunesSetup.exe?

  • Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

    Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

    We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

  • I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says -  'the version of the server you are trying to connect to is not supp

    I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says -  'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
    Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated.

  • I am using iPhoto version 9.6 and I can no longer get an email sent with a photo attached. I get an error message saying the email did not go through because the server did not reply. I can send the photo with Mail. Help!

    I have upgraded to Yosemite and also updated the iPhoto application to version 9.6. I am no longer able to send a photo from iPhoto via email. I get an error message saying the server is not responding. But, when using the same server in Mail, I can attach the photo and send it. My wife is using the older version of iPhoto and it works fine.
    I have checked the settings for the outgoing server, etc. and the Mail settings match those in iPhoto.
    Could this be due to either the Yosemite upgrade or the iPhoto upgrade?

    This solution is for those of you using 2-step verification for your Apple ID and are using iCloud as the mail server that you are trying to mail photos with.
    I too had this issue. The problem in my case occurred because I had setup 2-step authentication for my Apple ID. If you have done this then you will get the error message "the mail server did not recognize your email/password...". To solve the problem go to:
    https://appleid.apple.com
    Click "Manage Your Apple ID"
    Verify your identity with the device you selected (if this step does not show up then you have not likely set up 2-step authentication and this is not your solution)
    Click Password and Security in the left column
    Click Generate an app-specific password
    Enter iPhoto as the name of the app
    Copy the password and paste this into the password box in iPhoto where you would normally enter your apple ID (in the mail account section in iPhoto preferences).
    And...voila' (I hope)

  • When trying to download iTunes, I get an error message saying "the instaler encountered errors before iTunes could be configured. Errors occured during installation."  But it gives me no more information as to what I can do.  Help please?

    When trying to download iTunes, I get an error message saying "the instaler encountered errors before iTunes could be configured. Errors occured during installation."  But it gives me no more information as to what I can do.  Help please?

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • HT1904 I'm having trouble getting the digital booklet when I download an album. What do I need to do?  I get an error message saying the booklet can't be downloaded at this time.

    I'm having trouble getting the digital booklet when I download an album. What do I need to do?  I get an error message saying the booklet can't be downloaded at this time.

    Hello Bdev15,
    I would be concerned too if the songs I purchased from iTunes were not downloading to my iPhone. You have taken some great troubleshooting steps already, and thank you for providing the details of the steps you too.  I have a few additional suggestions to get it downloaded to your iPhone.
    First, I recommend checking to see if the download was interrupted:
    If your download was interrupted using your iPhone, iPad, or iPod touch
    From the Home screen, tap the iTunes app.
    For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
    Enter your account name and password if prompted.
    Tap the blue download arrow to resume.
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    If the songs still do not download, next I recommend downloading the songs when connected to another network.  For example, if you are using the cellular network, you could switch to Wi-Fi, or you could try an alternate Wi-Fi network.  Follow the steps in the section titled "iPhone, iPad, or iPod touch > Music" in the article below to download the songs:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    If you are still not able to download the songs, you can report an issue with these purchases using the steps in this article:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Best,
    Sheila M.

  • I cannot restore aback up from my computer after a softwared update. i kep getting an error message saying the phoneis disconnected even though it it not.

    cannot restore aback up from my computer after a softwared update. i kep getting an error message saying the phoneis disconnected even though it it not.

    If you're not a developer then you really should not have upgraded.
    I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

  • I have just deleted Macintosh HD. Now I have reset my computer and there is just a flashing glider with a question mark. I don't know what to do, I'm really worried about this so please May you get back to me as soon as possible?

    I have just deleted Macintosh HD. Now I have reset my computer and there is just a flashing folder with a question mark. I don't know what to do, I'm really worried about this so please May you get back to me as soon as possible?

    Why did you delete the hard drive?   If you delete the contents of the Macintosh HD you have no system to boot into.  That's what the flashing folder/? means.  What system were you using before deleting everyting.
    You're going to have to install a system on the HD before you can boot.
    OT

  • I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

    I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?

    Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?
    This happens a lot regardless of the web page. I continually have to restart FF and it persists still

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

    I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

Maybe you are looking for