I set up my printer wirelessly yet when I try to print wireless it states printer offline
Set up prinet wireles yet when trying to print get message offline
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.
Similar Messages
-
The ip is right in printer but wrong when I try to make wireless from USB
I have made a static IP address for the printer and put it in the printer as well. But when I use the software to set it up, it tries to ping an obscure IP that is not part of our LAN. How can I get it to Ping the IP I need it to ping? Is there a file I can edit to get it to choose the right IP?
Yes right... OJ J6480 sorry about that. When I worked at HP I uploaded LJ drivers to the web.
ANYWAY.... WPA-PSK... pointing to my router, my LAN, Right DNS Subnet etc.
The IP I chose was from the DHCP range. Do you think that is my problem? I made it a static IP. But I had this problem before I made it a static IP.
Ran the diagnostic program. It seem to point out my firewall. I made a few changes in my firewall. But I still can't print.
I'm wondering if I should uninstall the software on my laptop and reinstall it all over again. This is so frustrating because when I first installed it, it worked fine. Now I am having all kinds of problems and have to use the USB to print which I don't want to do. -
I recently replaced my dead airport router with a Netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer; yet when I try to print wirelessly I get the message: "printer not connected; printer offline". Lexmark support verified that my printer was connected to the new router and the problem was with the computer's printer configuration and they could reconfigure it online if I paid for their "Premium Support" services ($119 for one year, 3 fixes). I declined, feeling sure that this is something I could do if I knew how. Could it be an incompatability issue with OS 10.8.3?
You saved me $$$ that I can ill afford on my fixed income. I was very unhappy with the "support" from Lexmark... what a rip off! Thank you dwb!
-
I keep getting an error message that says "The administrator has set policies to prevent this installation" when I try to install iTunes. I have tried everything on the website. When i try to remove the components of iTunes I get the same message. How can I download iTunes?
Let's try something relatively simple. Download and save a copy of the installer to your hard drive (don't run the install on line and don't start the install just yet):
http://www.apple.com/itunes/download/
Now right-click on the iTunesSetup.exe (or iTunes64Setup.exe) that you downloaded and select "Run as administrator".
Does that go through any better for you? -
I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?
The following is from this Apple Document: iCloud: Photo Stream FAQ
What do I need to use Photo Stream?
To use Photo Stream, including Shared Photo Streams, you need an iCloud account, compatible devices, and up-to-date software:
iPhone, iPad, or iPod touch with iOS 6.0 or later
Mac with OS X Mountain Lion v10.8.2 or later and iPhoto 9.4 or Aperture 3.4 or later
PC with Windows 8, Windows 7, or Windows Vista (Service Pack 2) and the iCloud Control Panel 2.1 or later for Windows
Apple TV (2nd generation) with Software Update 5.1 or later
You can still use Photo Stream without Shared Photo Streams if your devices meet these requirements:
iPhone, iPad, or iPod touch with iOS 5.1 or later
Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
PC with Windows 7 or Windows Vista (Service Pack 2) and the iCloud Control Panel v2.0 or later for Windows
Apple TV (2nd generation) with Software Update 5.0 or later
For complete iCloud setup instructions, visit How to set up iCloud.
You need Mt. Lion in order to use Shared Photo Streams.
OT -
To repeat my question, Apple offered to install iCloud, and I allowed it. Yet when I try to sign in to iCloud using my Apple ID email and pswrd--an ID that I've been using for YEARS--I'm given the message, "This Apple ID is valid but is not an iCloud account." What is going on?
Everywhere I search on Apple's Support site says to sign in to iCloud using your "Apple ID," which I did. I've had my iTunes account for years (even migrated from the old AOL account system). It's the standard email+password that everyone is supposed to use.
My main question is how can I have a valid Apple ID and not an iCloud account--if the two are supposed to be linked?
Thank you for any help you can give me!
tljI've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish -
My Apple ID was changed. It works fine on my IPad mini, my MAc and in Itunes Store, Yet when I try to update apps on my IPAD 1 I am asked to enter a password for the old ID user name which appears in the pop up window. When It still askes for the wrong ID data. I have uodated it in settings, and I have logged ontht the account to verify that it still works properly and it does. I reboot the IPAD and then attempt to update apps again but it still asked for the Old ID password and still shows the old ID username. The dame thing refuses to recognize my new Apple ID data. This is making my older IPAD unuseable.
You cannot change your Apple ID. You can get a new one if you want, but all of your Apps and media are linked to yoru old Apple ID. And no, Apple won't transfer your old ID purchases to yoru new ID.
-
My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?
You already have the software installed that you need if you have 10.8.2.
If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
Power up the Express for a full minute
Hold in the reset button on the Express for 7-8 seconds and release
Allow a full minute for the Express to restart
Click the AirPort icon at the top of the Mac's screen
Look for a heading of New AirPort Base Station
Just below that, click on AirPort Express
What happens? -
I have changed my apple I'd primary email account and saved the changes yet when I try to buy from the App Store it still lists the old email address- can anyone advise how to fix this?
What id shows at the bottom of the Featured tab in the App Store app ? If it's the old email address that you had on your account then try tapping on it and log out of your account and then log back in and see if that 'refreshes' the account on the iPad.
-
Just set up iTunes for windows but when I try to sync my iPhone to it this is what it says, I have another iTunes library on my power book. It than asks if I want to erase this iPhone and sync with this iTunes library. I used the same password on this windows pc system same log on etc..I don't have anything loaded on it. All I want is for the info that's on the power book in iTunes and my iPhone to snyc/update etc on the windows pc. How do I do this? My power book is dead to the world.
Read here.
https://discussions.apple.com/message/18565125#18565125 -
After updating my Iphone 4s to os 7.1.1 from 7.1 over the air, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset. Make sure your network settings are correct and your network is active, or try again later. My phone has the itunes logo and charger symbol on it, as well as an arrow pointing at the Itunes logo. After holding the sleep button down or even doing the hard reset the same screen comes up on my phone regardless of whether it is plugged in or not to my computer. I have turned my computer off and on again. It is plugged in and charging as it's battery life is very short. I also reset my modem and the same error message pops up. The only option on my computer when my phone is plugged in is to restore it. My firewall also allows Itunes through it. I have literally tried everything I know being someone who knows very little about technology. I also do not want to hear about how the update worked for other people. My phone has been in recovery mode for 5 hours at least now so it will just make me more frustrated if a bunch of people post about how the update worked for them.
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
An app has disappeared from my screen yet when I try to reinstall it, it shows as already installed and won't allow me to install the app again.
Make sure you emptied the trash
Now restart
If that fails, click the in the upper right hand corner of your screen and type app name in -
Why am I having trouble running Adobe Flash Player 11 on my 2011 Macbook Air? I've downloaded and installed it repeatedly; yet when I try to open certain images online or play certain Youtube segments, I get the message, "You must have Adobe Flash 11..." My computer tells me it is installed and running.
If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 5.
1. If you're only having trouble with YouTube videos, sign in to your YouTube account and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
2. If you're getting a "blocked plug-in" error, then from the menu bar select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
3. Triple-click the line below to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
4. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
5. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
6. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
7. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane. -
I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?
OK, I tried a few things, and I do not understand the results.
1) I opened the document in Preview, and it would only recognize the three initial pages which I typed using the Pages App. It did not recognize the bulk of the text which I copied from Appleworks 6. It also did not recognize any of the scans.
2) I tried opening a pdf in Preview, and it would only recognize the scans. (No Text!)
3) I tried copying everything (select all, and command-c) in Pages, and then opened a blank Pages doc, and typed Command-v. This got me all of the text, but none of the scans!
4) I was worried that my Pages app might be corrupted, but I successfully converted a similar 78-page document with copied materials from Appleworks 6 and similar scans, ant this worked perfectly.
My conclusion is that my file must be corrupted. Is there any way to check this? shabda88 -
I have bought CC yet when i try to open it, it never opens.
I have bought CC yet when i try to open it from my desktop it never opens. Why? Along with this I cant install anything such as photoshop and lightroom.
Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430
or
Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Maybe you are looking for
-
Macbook pro won't go past start up screen
i started up my macbook pro today and it opened but couldn't scroll with the trackpad. force quitted (start button) it and then tried to start up again. this time i didn't get past the start up screen (with the apple logo and spinning timer). i then
-
Grrrrr Duplicate code in html links
Hi, Am new to dreamweaver so apologies if this is a dumb one... I have been working on my site and began to experience this problem. I have a menu with drop downs, the code is simple - but when I preview the page in browser (IE8 / Win7) and roll over
-
Runlevel 3 for one user and 5 for the other...
I want to set it up so that my wife, when she logs in goes straight into KDE as soon as she has logged in. I want to, ideally, remain in a console after loggin in - is this possible?
-
loaded ps6 on desktop and deactivated ps3, loaded ps3 on laptop but it will not activate
-
Hi, I want to call a shell script ftp to connect to a server, below the code of my file: ftp -n <<BODY open 172.30.10.XXX user SAP SAP pwd bye BODY when i run the script with function SXPG_COMMAND_EXECUTE and and command name Z_SH, return code is Not