I shrank my Yahoo e-mail by pushing the control button. How do I restore to original size

I shrank my Yahoo e-mail by pushing the control button. How do I restore to original size?
== This happened ==
Just once or twice
== I pushed the control button

I corrected my problem, which was having very small print when I went to Yahoo e mail, by clicking on reset on the view menu. Only my text was small, the toolbars were fine.

Similar Messages

  • Yahoo! Mail stopped pushing

    My Yahoo! mail stopped pushing few days ago and I've been trying all possible ways to get it back to work again but nothing seems to help. I also contacted Yahoo! support helping that they can assist somehow. Any advices iOS users? Mine is old - 4.3

    Forum etiquette dictates that you search forums before posting.  Had you done this, you would not only have gotten your answer faster, but you would have discovered that your issue has been addressed over and over again.
    Search this forum, or simply look to the right in the "More Like This" box.  You'll have your answer in no time.

  • My iphone 4s will not allow me to open any apps that I have downloaded. I have tried a few things but still will not allow me to open. Shows they are open once pushing the home button twice. Please help!

    My iphone 4s will not allow me to open applcations that I have downloaded. I have tried a few things but still will not allow me to open. Shows they are open once pushing the home button twice. Please help!

    Pressing the Home button twice does not show you what apps are running. It shows you what apps were recently used.
    Download a free app from the App Store. Once it downloads, your other apps should work properly again.

  • In mail Snow leopard, the trash button was red, the unwanted mail orange, the type button is gone, help?

    In mail Snow Leopard, the trash button was red, the unwanted mail orange,there was a type button.  Now the type button is gone, the rest is grey, why?

    I mean in OS X Lion of course. Same with Finder window: There used to be a 'Today' option, where has that gone? It was so easy to have an overview of the work you were busy with. Does anybody has a tip?

  • I accidentally pushed the cloud button next to a song that I didn't want and now I can't delete it... How do I delete it?

    I accidentally pushed the cloud button next to a song that I didn't want and now I can't delete it... How do I delete it?

    Hello Placencio,
    The song can be deleted by swiping the song, then tapping 'Delete.'
    iPad User Guide For iOS 7 Software
    http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
    Cheers,
    Allen

  • IPhone 4s looks shut down all the time.especially when the 3g is on.in the forums its said to push the use button and the power button at the same time.the people calling me cannot reach at my phone.what should i do ?

    my phone looks like offline all the time.its all about me to notice that its offline.then i have to push the main button and the power button together to open it.then the apple sign comes on the screen and the phone turns online.but i cannot receive the information of who called me at the time that my iphone 4s turned offline by itself.i cannot receive messages at all.what can i do now ? i sent the phone to the service and they just told me that they installed the current version.but i guess nothing happened.its doing the same thing again.i cannot use my iphone.
    From Turkiye.

    I've tried all those.But nothing works.The phone seems to be shut down.But it is not.When i get it out of my pocket, for example to call someone, i touch to main button but nothing happens.I solve it by pushing the power button and the main button together just for a couple of seconds, as its said so in the forums.
    also, people told me that they were calling me, my phone was ringing but i didnt answer?...i checked it for millions of times, it seems to be shut down, but its normally not.then i push the buttons together and the apple sign comes on the screen.it searches for the network.and it works.
    but i do not see any calls, texts anything.but for the others, they say my phone seems to be workin.
    I thought it was 'cause of the 3G is switched on but when I turn 3G off, it does the same thing.it seems to be offline all the time.

  • My mac pro wont start. I push the power button and I get a click sound. A few seconds later another click sound and that it.

    My mac pro wont start. I push the power button and I get a click sound. A few seconds later another click sound and that it. I've tried different power plugs. Going direct into the wall, through a power strip. By iteslf, with other devices plugged in. I removed hard drives, and some RAM, and nothing. Sometimes it would not turn on, and then some minutes later it works. So its was sparatic, but now its been the same situation for three days where it wont turn on.
    I'm guessing power supply, but I wanted to see if anyone had a similar expereince and what the solution was, before I drag this beast to my local Apple store and have them look at it. Its a real pain to get it there and back and I want to be armed with some info for them. I already dragged this to them when it first started to do this, and of course it started up just fine for them. And you know if it works for the Genius then theres nothing wrong with. No matter what you explain to them.
    I figure if anyone had a the same problem and was able to resolve it, I can relate that experience to the Genius even if it start up for them.
    Thanks

    Try a SMC Reset using the extended method:
    Remove the AC power cord.
    Press the power-on button. [This drains the stored charge from the power supply]
    wait a quarter minute.
    Restore the power cord, being certain to JAM it into the socket, as the big block of rubber inhibits proper seating.
    wait a quarter minute
    attempt to power on.
    If no joy, examine the button battery half-hidden behind the graphics card. Remove it to measure the Voltage. A new battery should not cost over US$5, and measures a little over 3 Volts. BR-2032 is used in garage door opener controls and car door locks controls. The geeks at Radio Shack can measure it for you.

  • Right now my ipod is set on 'music'. When I push the menu button, it will not go back to the main menu's, but I can still go to all the music and play it.

    Right now my ipod classic is set on 'music'. When I push the munu button, it will not go back to the main menus, but it will still go forward and select and play music normally. I tried resetting it by holding the menu and center buttons until the apple logo appeared, but the problem is still there.

    If your battery level is low, recharge it first for at least 2 hours, preferably 4 hours.
    After the Apple Logo, you release the buttons, what do you see on the iPod screen? (language selection?)
    Have a nice day!

  • TS1717 when trying to download podcasts to my ipod I get an error message that the download was interupted and to pust the get button to continue.  The same message happens every time I push the get button.

    When trying to download podcasts to my ipod I get an error message that says the download was interupted and to push get button to resume.  When I push the get button the same thing happens again and again.  It never completes the download.  What do I do?

    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    See "Firefox hangs when you quit it":
    *https://support.mozilla.com/kb/Firefox+hangs
    See also:
    *https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding
    *http://kb.mozillazine.org/Profile_in_use

  • Trying to connect my iphone 4 to my home wifi network! my android phone gives me the option of pushing the arrows button on my router and on my android phone but cannot find the "push the arrows button" option on my iphone 4. is this option available???

    trying to connect my iphone 4 to my home wifi network! my android phone gives me the option of pushing the arrows button on my router and on my android phone but cannot find the "push the arrows button" option on my iphone 4. is this option available?? and if so, where is it located???

    No such option on an iPhone.  Just go to Settings>wifi, tap the name (SSID) of your your home network from the list, then when prompted, enter the password.

  • My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

    My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I accidentally pushed the power button of my macbookpro... it restarted but doesnt open... what appears now is a flashing FOLDER logo with a QUESTION MARK on it.. can someboby help me to fix this?

    i accidentally pushed the power button of my macbookpro... it restarted but doesnt open... what appears now is a flashing FOLDER logo with a QUESTION MARK on it.. can someboby help me to fix this?

    (Assuming you don't have a firmware boot lock set)
    First easy step...
    1. Shut down the computer if it's on (hold the power button down... until it shuts off)
    2. Press the power button
    3. Immediately press AND hold the Option key ASAP
         Hold until drive option images appear in a single row across the screen. Typically most people running 10.7 or 10.8 will see 2 drive options to boot from: the main volume they usually boot from, and a recovery volume. If your main volume pops up. Use the cursor or arrow keys to highlight/select the main volume and press enter. That should boot your main volume. Let me know what you get from this point... I'll give you more as you go along.

  • How to code just like push the detail button in oo alv   ?

    I work with oo alv ,how to  do it when I double clikc mouse then just like I push the detail button?
    what i want to do is when I double click mouse ,it works just like push the detail button on the toolbar , I did debug and get the function code just
    when i  double click mouse , and I use
      CL_GUI_CFW=>SET_NEW_OK_CODE to do it ,but it not work as i wanted!
    in the class cl_gui_alv_grid  the constants :
    constants MC_FC_DETAIL type UI_FUNC value '&DETAIL'.    what is the ok_code for it ? i debug i and get the ok_code but it not work!
    can anyone give me some  suggest ?

    You can invoke an ALV toolbar function using the method SET_FUNCTION_CODE of class CL_GUI_ALV_GRID
    a®

  • How can I eliminate the slide when I push the home button?

    How can I eliminate the slide when I push the home button?

    What are you talking about?
    Slide to unlock?
    You cannot eliminate it.
    Something else?
    Please explain.

  • My apps freeze and I can't push the home button to get out of them.

    My apps freeze and I can't push the home button to get out of them.

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

Maybe you are looking for