I shut down my computer and reopened the Dreamweaver Application. Now I can not find my site name??

@I shut down my computer. When I went to reopen my Dreamweaver Application my site name was no where to be found. Please help!!

Site > Manage Sites or New Site > Click on screenshot.
After your site is defined, go to DW Files Panel (F8):
Nancy O.

Similar Messages

I can buy an iPhone 5 from users and it has been icloud, now I can not find it's owner, so anyone show me how to open it not, sir, thank you

I can buy an iPhone 5 from users and it has been icloud, now I can not find it's owner, so anyone show me how to open it not, sir, thank you

There is nothing you can do then. You have a brick.
The phone has an Activation Lock on it, and there is no way to get around it:
http://support.apple.com/kb/ht5818
Sorry,
GB

I am using my first apple product, mac book pro. somehow i FIGURED OUT HOW TO INCREASE THE FONT FOR SEARCHES AND WEB PAGES, BUT THE FONT IS TOO BIG AND FOR THE LIFE OF ME I CAN NOT FIND WHERE TO GET THE SCREEN BACK TO NORMAL, HELP ANYONE?

I am new to Apple, somehow I figured out how to make font of Web pages bigger, but it is too big and I can't use sites properly. for the life of me I can not how to get my font size reduced. Help anyone? thank you, sbb

Probably command-minus will do the trick.

My pc had a virus and evrything was cleaned -up now i can not find my i cloud icon

how can i down load my i coud again

the icloud icon comes if you install itunes and if not then then when you use apple update prog it will offer you downloading it

I was editing photos in my iphotos and it says Your photo library is either in use by another application or has become unreadable on me. I shut down my computer and when I restarted I can not access my photos, it keeps giving me

I was editing photos in my iphotos and it froze on me. So I shut down my computer and when I restarted I now can not access them. It says Your photo library is either in use by another application or has become unreadable. What can I do to fix this?

What you're describing is the Finder window for your external hard drive. When you're in iPhoto and try to edit a photo what happens?
Are you saying that the photos for your iPhoto library are located on the external HD while your library is in the Pictures folder on the boot drive? That would indicate a referenced library. You can check to see if you're running a referenced library by checking the Advanced Preference pane in iPhoto:
Click to view full size
So based one the Advanced preference pane in iPhoto what type of library are you running. Where is the library itself located? It should look like this:
By default it should be located in your Users/Home/Pictures folder. However, it could be run on an external HD.

When I close Firefox and then come back to it layer a box comes up that says it's already running. It ays to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firef

When I close Firefox and then come back to it later a box comes up that says it's already running. It says to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firefox again. If I can't get this fixed I will start using someone else. Someone told me a way to close Firefox but I forgot what they said.
== This happened ==
Every time Firefox opened
== a couple of months ago

Hello Brian.
You don't need to restart your computer to open Firefox again: you just need to close it manually through your application manager (CTRL+SHIFT+ESC in Processes tab). Anyway, hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Firefox+hangs
What's probably happening is that you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

When i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Hi, I cannot restart or shut down my MAC and get the message Geneio.it installer is cancelling your request. Please shut down and retry. However, I cannot seem to exit that application and I have no idea where it came from. Thanks

Hi, I cannot restart or shut down my MAC and get the message Geneio.it installer is cancelling your request. Please shut down and retry. However, I cannot seem to exit that application and I have no idea where it came from. Thanks
Could this be a virus?

Hold down the Power button until the computer shuts down.
The Safe Mac » Adware Removal Guide - Genieo
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

I shut down my computer and now it starts up, then shuts down again., I shut down my computer and now it starts up, then shuts down again.

I shut down my computer and now it won't restart. It starts, the apple logo appears, the wheel turns and then it's shuts down again. It has done that ever since.
My CD-Rom does not work so I can't reboot using the start up disk. Does anyone know what I can do to make it restart again ?????

Try resetting the SMC (http://support.apple.com/kb/ht3964).

I need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

i need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

Hello,
the way is written there Activation & deactivation help >>> (see there only to understand the procedure) Common activation problems >>> "Activation limit reached for [product]. This serial number has already been activated on 2 computers." "Maximum activations exceeded."
>>> How to deactivate or sign out >>> A single license for Adobe software lets you install the applications on two computers—for example, at home and at the office. However, you can use the software on only one computer at any given time.
If you want to install the software on a third computer, deactivate the software on the computer on which you will no longer use the software. Then, activate the software on the new computer.
Hans-Günter

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I was in the middle of downloading an update and my I4 disconnected. Now I can not reconnect to itunes. My phone wont power down. It just has the apple symbol with a bar underneath. How do I fix this.

I was in the middle of downloading an update and my I4 disconnected. Now I can not reconnect or power down my phone. It has the apple symbol and a bar underneath. How can I fix this?

Dear Terence, Thank you for responding to my problem. In no way did I mean to discredit the dedication and work of the volunteers assisting Apple customers and if I did, I apologize. I am just so tired of having to purchase a new computer every other year as so it seems. I know they are not perfected, but it is very frustrating when they just go kaput. I am always the first person to appreciate a kind deed and do appreciate your support and help regarding this unfortunate issue. My iPad was the greatest computer I've had until this morning and was disappointed. Again, thank you for your concern and for your help. It is greatly appreciated.
Sincerely,
Shakabird1

I plugged my phone into my a different computer (mac) that was not mine and it asked me to restore the phone. I started to back up the phone, then ended the phone got unplugged in the middle of the backup. Now we can't find where the iPhone backed up.

I plugged my phone into my a different computer (mac) that was not mine and it asked me to restore the phone. I started to back up the phone, then ended the phone got unplugged in the middle of the backup. Now we can't find where the iPhone backed up.

If it there is a backup you will find in in ~/Library/Application Support/MobileSync/Backup. (Just open Finder>Go>Go To Folder..., past this in the path box and click Go.)

Good afternoon. I have a problem. During the upgrade Iphone 4 c IOS 4.3.5 to 5.0.1, I pulled the cord. Now I can not restore the Iphone. Just lost imei, Wi-Fi, and phone became unusable. What should I do?

Good afternoon. I have a problem. During the upgrade Iphone 4 c IOS 4.3.5 to 5.0.1, I pulled the cord. Now I can not restore theIphone. Just lost imei, Wi-Fi, and phone became unusable. What should I do?

See if you can force the phone into recovery mode:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

When updating my apps it stoped half way through and won't start so now I can not use the app recently updated it to ios7

and won't start so now I can not use the app recently updated it to ios7 I have tried turn the device on and off still hasn't work and I would like to actually use my apps and I can not download new apps

If the apps are waiting:
Fix iOS Apps Stuck on “Waiting…” During Download & Install
Otherwise:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Download the apps to your computer and sysnc
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I shut down my computer and reopened the Dreamweaver Application. Now I can not find my site name??

Similar Messages

Maybe you are looking for