I shut my MacBook down and now it won't start (yes it's charged)

I was typing on my MacBook this morning and hit the esc key a couple of times by accident. My keyboard stopped working and was only typing . and/. I went to settings to adjust; turned my computer on and off a few times, then shut it down and now it won't even start. It is charged. Any suggestions?

What does it do when you turn it on? Does it do anything at all?

Similar Messages

My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command p r, what else?

My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did, I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command+p+r. Any other suggestions before i take it to apple service center?

A four year battery could be dead. I'd contact an Apple Service Center.

Dented my Macbook Pro and now it won't start up. Please Help!

Hello. I have searched and searched and cannot find a solution.
Last night I was putting the finishing touches on my dissertation and accidentally dropped a tape dispenser on my 1-year-old MacBook Pro - it hit just to the left of the trackpad and left a nice little dent! After the "incident", I was attempting to pull up Word and the machine completely froze. I turned Mr. Mac off by holding down the power button and when I tried to restart, I never got past the Apple logo with the little spinning circle. After trying many times to restart, I made it to my desktop only twice, and after the dock appeared (with no menu bar above or desktop icons), the machine froze again. Each time, I heard the hard drive working until the big freeze.
I was able to boot off of the Leopard install disc and ran "repair disk" on my hard drive - no errors were found. Tried restarting again and got nothing. I have since tried restarting with various key combinations and the machine only responded to "C" and "Option".
This morning, I searched again and decided to try the "optioncommand+pr" to reset the PRAM as suggested to another damsel in distress with a similar issue. Now, when I try to restart, I get the gray screen followed by the chime, and then nothing - no hard drive working, no Apple logo, no spinning circle, nothing. My install CD will not spin and I none of the start-up key combinations work. It just sits there staring at me with that gray screen - laughing because my dissertation is in there somewhere and I can't get it out! Yes, I have backed my maching up on a 500G external hard drive, so I haven't lost much - but I can't access my hard drive without Mr. Mac! And I am a lonely Mac owner here - no others to borrow!
I am going to an Apple Store on Saturday, but I thought I would give you guys a chance to save my life first. Any suggestions for this girl and her Mac would be great! I am defending my dissertation next week and I'm about one small crisis from a major meltdown!!!!!!
Thanks!

Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

I opened my Macbook pro and now it won't start

So I started to have issues with my MacBook Pro not recognizing the hard drive. I opened it up and started to see how dirty the inside was so I took the logic board and battery and cleaned them up. When I put eveything back together, now the machine wouldn't even start, I've tried everything I know and don't know what else to do. What could have gone wrong and how can I fix it?

My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing a green and amber but very dull. Help please!

My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing the amber light. I don't know what to do, and this has never happened before.

Hello Toby135
Reset the SMC or System Management Controller to resolve issues with the power on your MacBook Pro and power adapter.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Regards,
-Norm G.

My Mac book pro shut down after getting a low battery message, and now or won't start at all. It's plugged in now and nothing, no fan, no chime when I hold down the power button

My Mac book pro shut down after getting a low battery message and now it won't start. Any ideas?

Hey Citrinesky,
Thanks for the question. I understand your MacBook Pro is not responding. The following resource may provide a solution:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Thanks,
Matt M.

I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up.

I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.

Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!

After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?

After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?

Regarding your new Guest Account.
If it is the Guest User created by Find My Mac, it is advisable that you leave it be in order to maintain the functionality of the Find My Mac system. It is not a typical guest account. A person can't use the account to log into the system. It only permits the user (presumably a thief) to use a crippled version of Safari, in which the thief will reveal his/her location, hopefully to an end result wherein you may be able to recover the stolen computer.
The very nature of this unique guest account is to increase the security of the system, not to degrade it as a typical guest account might do.

I killed a MacBook Pro. Shutdown with flash in drive and now it won't start at all.

I may have killed my MacBook Pro OS X by accidentally restarting with a Flash Drive it it and now it won't start at all. Any ideas?

So it is powering on. You did not state that before. In that case:
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see this if above doesn't work:
Install OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.
This should install the original version of OS X that came on the machine.

I put my macbook into target disk mode and now it won't start up in regular mode

I put my macbook into target disk mode and now it won't start up in OSX. I have used my install disk and repaired the drive. I have held down the option key to choose the system. I have tried to start in safe mode with same result. The apple screen appears, but the gear just keeps turning. I can get it back into target disk mode by connecting it by firewaire to my macbook pro. It will start up in Windows when I choose that system. What can I do to get it to start up with OSX?
Thanks for your help.

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

My iphone 4s fell down and now it won't open

Hello! So, my iPhone 4s fell down and now it won't open. I've tried to turn it on by holding simultaneously the home and lock button but nothing happens. I've plugged it in to its charger but all it does is vibrating constantly. Any suggestions?

Could be hardware damage.
Take your iPhone in for service.

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

ITunes kept freezing and now it won't start at all

It all started when I downloaded an iTune U class that contained a lot of videos and chose to download all old episodes. It turned out there so many that it would take 25 hours. I tried to abort the downloads, but apparently that messed something up.
First iTunes started up normally, tried to download "83 items" and then started to freeze up after a minute. I had to shut it down via the Task Manager.
Then it got worse, and now it won't start at all. After I click on the icon to open iTunes (I have Windows 8) the screen turns white, the blue wheel spins and nothing happens. When I hold the cursor over the iTunes icon in the task bar I can see two preview tiles (one for Download and one for iTunes itself), but both are blank (all white) and nothing happens - the blue wheel will spin forever. What do I do?
I do have the latest version of iTunes. If I uninstall and reinstall iTunes, will that solve the problem? And will the content of my library still be there? Thanks!

Hello, J Appleseed.
Thank you for visiting Apple Support Communities.
You can try an uninstall and reinstall of iTunes to see if that resolves the issue. Your iTunes library will not be deleted by doing this. However, this issue could be a result of multiple issues so an uninstall/reinstall may not resolve this. Below, I have included the best articles that will help you isolate and possibly correct this issue. Process each step and test the results after each step processed.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/ts3125
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
Cheers,
Jason H.

Plz help Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?

Plz help
Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?

/var is a hidden folder, so you mustn't remove the folder.
The only solution is to reinstall OS X. If you have OS X Lion or Mountain Lion, use OS X Recovery > http://support.apple.com/kb/HT4718
Hold Command and R keys while your MacBook is starting and reinstall OS X. You won't lose anything. If you have a backup, you can restore it after starting in OS X Recovery instead of reinstalling Mac OS X, so you will save a lot of time

Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?

Plz help
Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?

Reinstall OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I shut my MacBook down and now it won't start (yes it's charged)

Similar Messages

Maybe you are looking for