I-sight bulit in cam with windows vista

hi
I am using macbook white with leopard & windows vista home with boot camp 2.0
i sight cam i snot working with vista while it is ok with mac os.
any one can help???

more update from my side.....
i hv installed windows vista home premium edition on my macbook(white) by using bootcamp2.0 & load all drivers by mac os disc1.
iSight camera is shown in device manager but not in my computer.where is the problem.
cam is working with yahoo messanger.i tried to update driver for iSight cam online thru internet,but it says driver is already updated.
i hv updated all whatever update available on net(both for windows vista & apple software update).but problem is same.
vista is showing problem as follows....
Product
Apple Built-in iSight
Problem
Could not load driver software
Date
1/4/2008 4:42 PM
Status
Not Reported
Description
Windows was able to successfully install device driver software, but the driver software encountered a problem when it tried to run. The problem code is 10.
Problem signature
Problem Event Name: PnPDeviceProblemCode
Architecture: x86
Hardware Id: USB\VID05AC&PID_8503&REV_0188&MI00
Setup class GUID: {6bdd1fc6-810f-11d0-bec7-08002be2092f}
PnP problem code: 0000000A
Driver name: usbvideo.sys
Driver version: 6.0.6000.16386
Driver date: 11-02-2006
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
ANY ONE CAN HELP

Similar Messages

Isight cam with windows vista home

i hv installed windows vista home premium edition on my macbook(white) by using bootcamp2.0 & load all drivers by mac os disc1.
iSight camera is shown in device manager but not in my computer.where is the problem.
cam is working with yahoo messanger.i tried to update driver for iSight cam online thru internet,but it says driver is already updated.
i hv updated all whatever update available on net(both for windows vista & apple software update).but problem is same.
vista is showing problem as follows....
Product
Apple Built-in iSight
Problem
Could not load driver software
Date
1/4/2008 4:42 PM
Status
Not Reported
Description
Windows was able to successfully install device driver software, but the driver software encountered a problem when it tried to run. The problem code is 10.
Problem signature
Problem Event Name: PnPDeviceProblemCode
Architecture: x86
Hardware Id: USB\VID05AC&PID_8503&REV_0188&MI00
Setup class GUID: {6bdd1fc6-810f-11d0-bec7-08002be2092f}
PnP problem code: 0000000A
Driver name: usbvideo.sys
Driver version: 6.0.6000.16386
Driver date: 11-02-2006
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
_*ANY ONE CAN HELP*_

According to the spec sheet that system doesn't have Bluetooth. It might have a Bluetooth entry in the Control Panel, but the hardware isn't installed. That's why it can't find the phone.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Games that came with Windows Vista

I just recently had a system recovery completed and an increase to the PC performance (more speed). Prior to this, games such as FreeCell, Spider Solitaire, etc. worked just fine; now they are "lagging". I have all the recent driver/devise updates, so I don't think that the problem lies there. Please provide some advice or assistance. I understand that a "registry cleanup" may help?
Thank you.

Hi:
If you create the system image from the file history window, it will be of your current W8.1 installation.

Recognizing an iPod with Windows Vista

I have a new computer that came with Windows Vista. I have not been able to get iTunes to operate correctly for Windows Vista to recognize the USB connection to my iPod. Anyone have a patch or downloadable software suggestion to resolve this?

groans
I finally figured I had nothing to lose--I'd just downloaded a new version of Real Player, which supposedly will work with iPods and Windows Me--and I let my computer format the iPod, hoping that would let it work with Windows again. Apparently not. Now it won't turn on--it's giving me the folder-and-exclamation-point icon. Resetting it didn't help, and I can't restore it because I can't install the software to my computer in the first place.
I suppose the only thing to do is borrow a friend's computer or something.

DESPERATE! IPOD NOT SHOWING IN ITUNES WITH WINDOWS VISTA.

I recently bought a new Dell Dimension E520 which came with windows vista pre installed. I seem to be one of many people having problems with it!
Newest version of Itunes (7.1) is installed and working fine. When I plug my IPOD nano in however nothing happens. It is visible in the device manager on my PC but doesn't show in itunes.
I've been to the apple store and they said that the new itunes should fix the problem but it hasn't. they've checked my nano and it is fully up to date.
I know it is a driver problem but i have absolutely no idea what i'm looking for when i go to the support section on this website!
the reason I bought a new PC was that my old computer wouldn't download the new itunes and therefore i couldn't access the store or any songs bought from the store on my nano (plus it was 14 years old). it did however actually recognise my IPOD!
It's been nearly 6 months since i've been able to update my ipod with songs and i'm getting desperate!!!! please can anyone help??

iTunes does not yet support Windows Vista. There are numerous problems running iTunes on it. The latest release of iTuens 7.1 fixed some of them but not all.

Oracle EBS with Windows vista

I recently brought HP laptop, which came with windows vista OS. I can't go back to XP. Drivers does not support any other OS.
Did any body try installing oracle apps version 11 down loaded from oracle site.
Please advise me!!!

Oracle E-Business Suite 11i/R12 is not yet certified on Microsoft Vista.
Certify - Oracle's Certification Matrices
http://www.oracle.com/technology/support/metalink/index.html
If you can manage to use VMware and install some other certified OS, it would be better.

Conflict With Windows Vista?

Please help me. This is truly, truly awful.
I got a new computer AMD Athlon 64x X2 Dual Core, 2.4GHz.
It came with Windows Vista Home Premium.
I installed Adobe Flash Professional 8.
I have Windows XP at home and Flash 8 works just fine.
On this computer, ANY movie clip I double-click on takes
f..o..r..e..v..e..r to update the screen. Excruciatingly slow.
If you notice when you double-click a movieclip Flash makes
an animation of a dashed box zoom up from the clip to make it look
as if you are zooming into the movie clip -- well I watch that
dashed rectangle slowly, slowly expand till it fills the whole
screen. Only then will Flash resume normally. It expands in slow
chunky movements.
Strangely enough, if I click on a movie clip in the library -
no problems. It opens up almost immediately.
I've tried this with new files, old files, sample files. All
the same.
Either Windows or Flash hates something about that 'zooming
into a movie clip' animation. It hates backing out of them too. I
get the dashed box when I go back to the main timeline as well.
This is just devastating. There is no way I can use Flash
like this.
Any suggestions welcome.
I've already shut down every background program I thought was
interfering. I've already reinstalled. (The uninstall took a
bizarrely long time to do its thing. Could I have a bad copy?) I've
kept a processor meter running whilst the problem occurred and the
processor isn't sweating it at all. So what's the problem!?
I was tech support for years, but here I'm completely at a
loss.
And trying to google 'problems flash 8 slow opening movie
clip' is obviously useless.
*sob*

there were a few lengthy threads about this a couple weeks
ago - try searching - i cant remember the
solution and i dont have vista.
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
FreshLaundry wrote:
> Please help me. This is truly, truly awful.
>
> I got a new computer AMD Athlon 64x X2 Dual Core,
2.4GHz.
> It came with Windows Vista Home Premium.
> I installed Adobe Flash Professional 8.
>
> I have Windows XP at home and Flash 8 works just fine.
>
> On this computer, ANY movie clip I double-click on takes
f..o..r..e..v..e..r
> to update the screen. Excruciatingly slow.
> If you notice when you double-click a movieclip Flash
makes an animation of a
> dashed box zoom up from the clip to make it look as if
you are zooming into the
> movie clip -- well I watch that dashed rectangle slowly,
slowly expand till it
> fills the whole screen. Only then will Flash resume
normally. It expands in
> slow chunky movements.
>
> Strangely enough, if I click on a movie clip in the
library - no problems. It
> opens up almost immediately.
>
> I've tried this with new files, old files, sample files.
All the same.
>
> Either Windows or Flash hates something about that
'zooming into a movie clip'
> animation. It hates backing out of them too. I get the
dashed box when I go
> back to the main timeline as well.
>
> This is just devastating. There is no way I can use
Flash like this.
> Any suggestions welcome.
>
> I've already shut down every background program I
thought was interfering.
> I've already reinstalled. (The uninstall took a
bizarrely long time to do its
> thing. Could I have a bad copy?) I've kept a processor
meter running whilst the
> problem occurred and the processor isn't sweating it at
all. So what's the
> problem!?
>
> I was tech support for years, but here I'm completely at
a loss.
> And trying to google 'problems flash 8 slow opening
movie clip' is obviously
> useless.
>
> *sob*
>
>
>

Ipod touch with windows vista

Hi,Im looking into geting the ipod touch,but I have read that the ipod touch does not work well with windows vista. I know the new itunes 7.5 just came out. Has that version fixed the problems with the ipod? Also what are the problems the ipod touch is haveing with vista. I have windows vista 32 bit OS. Thank you very much for your help.

Hey, yeah I have major problems syncing to Vista. The album artwork is assigned to the wrong songs or sometimes a chunk of the picture is not in the right place, some of my songs stop half way through the song then the iPod skips to the next song on the list. My movies periodically decide to crash and the only way to get past these spots is to skip ahead (which is very difficult on the iPod touch especially when the movie is long cause you dont want to miss too much) but yeah just letting you know that there ARE some issues with it not saying that yours will do the same but it might.

Itunes problem with windows Vista

ok i bought my touchsmart tx2 1025 with windows vista ultimate 64 bit and well i ve noticed that ..well since this is my third time i exchange this computer and i noticed there was a problem with the speakers when i was playing music that anytime during a song i would get this distorted sound like when u put a lot of volume in ipod headphones that it sounds like a crack. Well that happened in my computer even with low volumes.
However I played two times the same song on itunes and two times on windows media player.
Every single time on itunes the sound came as if the speakers were about to blow... like a crack..
Every single time on Windows media player it never sounded like that.
So i am pretty sure its an itunes problem. Does anyone know how to fix this.. i would rather use itunes than windows media player but i really hate the sound it makes sometimes because it shows about 2 to 3 times during one song.

It's possible that the song your playing does indeed have a little audio distortion in it, some media players are capable of filtering it out in a silent way, others play a beep, hence with one song I have, if i play it in windows media player it goes on and then for a split second theres a beep, iTunes doesent seem to do it, so instead of filtering out the missing data, it plays it.
This is more likley a problem with the song than iTunes

Making iSight work with Windows Vista on VirtualBox

I have a MacBook Pro with Windows Vista installed on the VirtualBox platform. The only problem I have is that it will not work with the iSight camera. I need the cam for video conferencing on a webring, and I do have to run the ring in Windows. When I start the ring, the camera comes on but I never get an image. The image screen just says "Initializing" and shows a counter showing the seconds elapsed. Is there a driver I can install, or some sort of workaround?
Thank you,
Leah

Hi,
Then you need to get at least the Snow Leopard Install Disk at the $29 price.
The Original Disks will be grey and are Model Specific.
That is to say that any Grey disks for an iMac for example are only useful to Reinstall the OS on another iMac from the same Production range - say Early 2008
7:27 PM Thursday; November 11, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Cant get my printer to work with Windows Vista

I have a Deskjet 932C printer. I bought my computer 2 years ago and my printer worked just fine with Windows Vista. We just moved so I had to take everything apart and put it back together. Now I cant get my software to install that came with my printer and when I plug the USB cable in its not reading that there is new hardware. Can someone help me???

shortyk wrote:
I have a Deskjet 932C printer. I bought my computer 2 years ago and my printer worked just fine with Windows Vista. We just moved so I had to take everything apart and put it back together. Now I cant get my software to install that came with my printer and when I plug the USB cable in its not reading that there is new hardware. Can someone help me???
If the printer was installed previously then you would not detect new hardware when plugging the printer in. Go to Start, Control Panel, Printers and check for an existing Deskjet 900 series printer. If this printer exists in the list double click on it and check to see if the printer is shown as offline or paused. If so correct the issue by clicking the appropriate line.
If the printer does not show as installed then install it as shown here. If this does not correct the issue then unplug the USB cable, then go to the device manager and delete the ports associates with the USB printer and allow the system to rediscover the USB devices.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Router WRT54GL with Windows Vista

Greetings,
We just bought two Dell E520 computers that will come pre loaded with Windows Vista OS. I also have a WRT54GL router still fresh in the box and un opened.
When we receive our new computers we want to use our new WRT54GL router with the two new desktops hard wired into the WRT54GL router.
Will the CD that came with this new router be able to run on Windows Vista?
If the CD will not run on Windows how should I go about setting up my two new computers to use the router?
I want to use these two new Dell E520 computers hard wired in to the new WRT54GL.
I have two laptops that are wireless capabel. I would like to use these two laptop computers in their wireless mode.
How do I go about setting up the new Dells that will be hard wired in to the WRT54GL modem if I cannot run the CD First on Window Vista as the instructions says that I should run the CD first before I plug in the two new Dell desktops into the router.
I hope these comments are clear and understandable. Please ask for more information if needed.
Thanks in advance for your help and understanding.
Leigh
Leigh

Thanks,
Can I use the Linksys CD that came with the router. On the CD it says Run CD First. Can this disk run on Windows Vista?
If not do I need to somewhere on Linksys site to download a new disk?
Thanks for your support and help.
Leigh

WebCam Vista not working with Windows Vista

Dear All,
Pls help me, I have a new laptop with Windows Vista Home Premium, but i bought a Creative WebCam Vista (one with 3 legs and round cam-head)i think i found the right software, but the installation is not completed giving error message, and its not allowing to compelete the installation, Anyone from this forum or from creative team, please help me,
Thank you,
dixondubai

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

Lenovo G405 Incompatibility with Windows Vista-32 bit

Hello I'm new here so I wasn't so sure if this is properly posted here but thanks.
I bought a Lenovo G405 laptop that came with dos 6.22 or 6.2.2 or something. Then I performed a clean installation of Windows Vista 32-bit. The problem is that, I can't find any drivers for lenovo g405 that is compatible with windows vista .. Even the AMD Auto diagnostic tool refuses to install the detected driver since it was Hardware/Software Incompatible. Any suggestions? or Links for Win Vista Drivers for Lenovo g405. Thanks!

If your model is lacking the correct Vista drivers from Lenovo and Vista doesn't offer native support then I see upgrading to Windows 7 as your only option. Here is a link to what Lenovo drivers are available.......
http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS035825
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

WRT54GL with Windows Vista

Greetings,
We just bought two Dell E520 computers that will come pre loaded with Windows Vista OS. I also have a WRT54GL router still fresh in the box and un opened.
When we receive our new computers we want to use our new WRT54GL.
Dose Linksys have new drivers that will be compatable and run with Windows Vista and the WRT54GL?
Thanks in advance for your help and support
Leigh
Solved!
Go to Solution.

Thanks,
Can I use the Linksys CD that came with the router. On the CD it says Run CD First. Can this disk run on Windows Vista?
If not do I need to somewhere on Linksys site to download a new disk?
Thanks for your support and help.
Leigh

I-sight bulit in cam with windows vista

Similar Messages

Maybe you are looking for