I Sight cannot communicate from Imac OS X 10.3.9 to Imac OS 10.4.6

We were in contact by Isight. She broke her camera. She replaced he camera with a new one. After this we have been unable to connect again.
We installed Sightspeed and have been able to communicate using this program.
Any ideas why can we not use Isight?
Thanks,
Gaston

Hi gaston g,
Try this.
Go to /Users/(your account)/Library/Preferences
Delete com.apple.ichat.plist as this hold the camera info.
I take it the camera is seen in iMovie ?
12:50 AM Thursday; June 15, 2006

Similar Messages

Cannot connect from iMac to Windows Home Server 2011 shares

Hi guys,
I am having dificulties connecting from iMac to Windows Home Server 2011 shares.
First of all it takes so long time to discover the share in iMac, which it's called "mediaserver". After finding it i cannot connect and gives "Connection Failed: message. If i choose "Connect As.." option i wait some time and then pops out with an error: "There was a problem connecting to the server "mediaserver". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
If i try from Finder -> Go -> Connect to Server ... write in Server Address : smb://mediaserver it fails. But if i write the IP address, like: smb://192.168.1.42 it works after couple of tries. If i try now to Make an Alias for the share i get "The operation can't be completed. An unexpected error occurred (eror code -8060)."
Has anyone experienced these problems ? I have updated to Mac OS X version 10.7.3. Could that be the problem ?
Any help will be much appreciated.
Thank you in advance,
Simi

You need to reinstall the updated WHS connector for Mac. You should then be able to access your shares on WHS 2011.
The problem I'm having is I can't get Time Capsule to recognize the WHS 2011 mapped folders that show up on the desktop as a drive, so Backup won't work.

I Cannot print from imac iPhoto 9.6 using Yosemite 10.10.1to Epson printer? How do I fix this problem?

I Updated my iMac to Yosemite 10.10.1 and cannot print from iPhoto 9.6 to my Epson picture mate PM240 photo printer. I had no problem printing before the upgrade. It seems like I don't have a connection between the iMac and Epson Printer. I checked all connections and they are correct. I visited the Epson site and there were no updates available for the PM240. The problem arises after I select a picture to print. When I select PRINT from the FILE the spinning color wheel begins and I cannot go further.
I Contacted Apple and the technical adviser ran the iPhoto troubleshooting programs within IPhoto. This seemed to solve the problem, but the problem almost immediately reocurred. Does anyone have a solution to this problem?

Thanks for the replies guys. Epson put me through a complex set of instructions to install an earlier driver. The problem was not solved. Apple also tried to solve the provlem by getting rid of the printer, unplugging it etc and then re starting and checking computer/printer communication by printing a test page from the system preferences/Pring & Fax options. This worked proving the the computer and printer are talking to each other.
The printer works properly as a stand alone unit. That is, I can copy and print and scan and print with no problems.
The Apple support guy didn't suggest any Apple alternative drivers so I assume there aren't any.
Neither the Epson nor Apple assistants seemed interested in the printer generated error message. I would have thought it would at least provide a clue to the problem to someone with technical expertise.
It seems that there are a lot of problems with the 10.6.8 update so maybe Apple will get to work and bring it up to scratch. I hope it gets things right soon.

Cannot communicate from weblogic 10.3.5 to weblogic 8.1.4 (OIM 11gR1)

Hi all,
when i run java class adapter in oim 11gR1, which contain ejb class from other weblogic(8.1.4), i facing problem that request which i run cannot finish or process is looping forever.
my code :
public String create(){
SecurityMngr = (SecurityManager) connMthdDsms.connectionForDsms().get("a");
success = SecurityMngr.addUser(uvo);
if (success)
result = "C";
does error is about connection between weblogic 10.3.5 with weblogic 8.1.4. or other?
i use OIM 11gR1 bp7, Weblogic 10.3.5,
regards

Hi all,
when i run java class adapter in oim 11gR1, which contain ejb class from other weblogic(8.1.4), i facing problem that request which i run cannot finish or process is looping forever.
my code :
public String create(){
SecurityMngr = (SecurityManager) connMthdDsms.connectionForDsms().get("a");
success = SecurityMngr.addUser(uvo);
if (success)
result = "C";
does error is about connection between weblogic 10.3.5 with weblogic 8.1.4. or other?
i use OIM 11gR1 bp7, Weblogic 10.3.5,
regards

HP F2210 printer, wired LAN, cannot print from iMac when printer is installed on Windows XP.

Let's try this again...
I have a home network, and have installed my newly purchased HP F2210 printer on one of the PC's running Windows XP SP3. I have fully installed & updated the drivers, and the printing functions work perfectly from the computer on which it's installed.
I am also able to print without issue from any other PC running windows on my network.
My wife has an iMac running Macintosh OS 10.4.11. When connecting directly to the network via a wired connection, I am unable to locate the F2210 as an available printer on the network.
Troubleshooting steps taken:
* I have tried disabling airport to ensure it's trying to find the printer through the wired connection rather than the wireless.
* I have attempted to install "additional drivers" on the PC the printer is connected to. THIS FAILED, as I was unable to get windows to find the correct drivers on the install disk.
* I attempted to install the printer drivers directly on the iMac. I was still unable to locate the printer after doing this.
Any suggestions for other steps to try would be appreciated.

Hi there, when you check the printer job history in your ePrintCenter account what do you see? Is there a record of the failed print jobs? Here's a link to a post with some troubleshooting steps for ePrint connectivity issues. Take a look at the suggestions here and try them in the order they are presented http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/ePrint-Apps-Connectivity-Troubleshooting-Pleas...
Hope this information helps to resolve your problem. Best of luck.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Cannot print from IMac or Dell Latitude Laptop on Canon MX330 printer via Airport Extreme.

Trying to connect a Canon MX330 printer to an IMac and Dell Latitude laptop via Airport extreme and having no luck.
All devices recognize the printer, but when I try to print from the IMac it says that the printer is offline, even though it is not. The printer status on the IMac says offline until I clear the printer queue and then the status goes online.
When I try to print from the Dell laptop the printer reacts, but nothing prints.
I have run through all of the troubleshooting in the support section online. Any advice?

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Ip obtained from WAP, but cannot communicate

I have a Dell Truemobile 1150 wireless pc card. I have all of the device drivers installed (orinoco drivers and pcmcia drivers). I cannot communicate with my WAP and any device on my network. I am using dhcp and have successfully obtained an IP address from my WAP, but I cannot ping it or any computer connected to my network.
I does not make any sense that I can obtain an IP address from my WAP, but I cannot ping it or do anything useful with it. I know it has nothing to do with the default gateway because I cannot even communicate with other computers inside of my network.
Arch Linux is the only distribution that does this. I have tried Slackware and Debian, and they both work fine. However, I do not like Slackware and Debian as much as I like Arch.
# dmesg
orinoco 0.15rc3 (David Gibson <[email protected]>, Pavel Roskin <[email protected]>, et al)
orinoco_cs 0.15rc3 (David Gibson <[email protected]>, Pavel Roskin <[email protected]>, et al)
eth1: Hardware identity 0001:0004:0005:0000
eth1: Station identity 001f:0001:0008:000a
eth1: Firmware determined as Lucent/Agere 8.10
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:2D:B4:F6:1E
eth1: Station name "HERMES I"
eth1: ready
eth1: index 0x01: Vcc 5.0, irq 11, io 0x2100-0x213f
eth1: New link status: Connected (0001)
# lsmod
orinoco_cs 15208 1
orinoco 41972 1 orinoco_cs
hermes 6688 2 orinoco_cs,orinoco
pcmcia 25256 1 orinoco_cs
yenta_socket 25580 4
rsrc_nonstatic 10112 1 yenta_socket
pcmcia_core 36848 3 pcmcia,yenta_socket,rsrc_nonstatic
# pccardctl ident
Socket 0:
product info: "Dell", "TrueMobile 1150 Series PC Card", "Version 01.01", ""
manfid: 0x0156, 0x0002
function: 6 (network)
Socket 1:
no product info available
# iwconfig eth1
eth1 IEEE 802.11b ESSID:"wireless" Nickname:"HERMES I"
Mode:Managed Frequency:2.412 GHz Access Point: 00:30:BD:C5:92:EA
Bit Rate:11 Mb/s Sensitivity:1/3
Retry limit:4 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=56/92 Signal level=-39 dBm Noise level=-95 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:02:2D:B4:F6:1E
inet addr:192.168.2.10 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:19 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3053 (2.9 Kb) TX bytes:1516 (1.4 Kb)
Interrupt:11 Base address:0x2100

I fixed it. There was some kind of conflict with my other network adapter.

I cannot eject DVD from iMac. It sounds as if it is trying to eject. I've tried onscreen eject and keyboard eject key.

I cannot eject DVD from iMac. It sounds as if it is trying to eject. I've tried onscreen eject and keyboard eject key.

Restart the computer while holding down the eject key.

I cannot sync my contacts from iMac (Address Book) to iPod Classic since iTunes 11 has loaded. Any advice please ?

I cannot sync my Address Book contacts from iMac to my existing iPod Classic since iTunes 11 has loaded. Any bright ideas please ?

I'm having the same issue. I have an iPod Classic 120gb with 2.0.1 and iTunes 11.0.1 on an iMac running Mountain Lion 10.8.2.

Cannot wake my iMac from sleep

I put my iMac to sleep by doing one of required steps. However, I cannot wake my iMac from sleep. I am using a wired keyboard and a wireless mouse.
May I know what is the problem?

Hi nihow-
But you are not done.
One of those devices is preventing your mac from waking. You may want to try plugging them back in one at a time and use it for a while to see if you can find the culprit.
Luck-
-DaddyPaycheck

Cannot browse/copy iMac files from my MacBook Pro; REALLY FRUSTRATING...

Hi folks,
Wondering if anyone could help me out here??
I can browse and copy MacBook Pro contents over to iMac (from Finder within iMac). Unfortunately i can't do the same, other way around. Can neither browse nor copy content from iMac to MacBookPro (from Finder within Mac Book Pro).
File Sharing has been turned on both on MacBook and iMac. Users have full access including administrators. Full Read/Write permissions on all files within the folder that i want to share have been granted. Firewall is turned off on both computers.
On MacBook Pro Finder, the iMac appears under SHARED on the left column. But when one clicks it or presses the button 'Connect As' - the following error always appears.
"The Server "Michael Newham's iMac" is available on your computer. Access the volumes and files locally." (Obviously they're not available locally.
I've used the Go - Connect to Server drop down option using afp and ftp access, but nothing there either. Both machines have Leopard 10.6.2
So I'm a bit flummoxed
Would appreciate some help.
Mike Newham, Tipperary, Ireland.

Turning ON and Off FileSharing on both machines seems to solve the issue.

Cannot see wdtv live from imac

hello everyone,
hope i am explaining it correctly:
the imac is the main computer where all data are.
the macmini is for internet, pictures and streaming data from the imac (mostly movies).
the wdtv live is only streaming from imac. (only movies)
as of yesterday, the imac is not visible to any device...
restarted everything, nothing
changed the ip to manual, nothing
changed it back to DHCP, lost the internet
here is where i stop, any ideas?
any help is appreciated!
alex

Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup

Suddenly I cannot print from firefox. It was printing one day and would not communicate with the printer the next.

Suddenly I cannot print any web pages from Firefox. It was printing one day and not communicating with the printer the next. Did not happen with an upgrade to Firefox or plugins. Printer dialog came up but nothing sent to printer.
== This happened ==
Every time Firefox opened
== suddenly- no known reason

I cannot print from Firefox either all of a sudden. Maybe first thing in the AM, it will print something but then, that's it. I am running OX 10.5 too and using Firefox 3.6.8. I am ready to stop using this!! I like it but it is frustrating. I am on my mac all day for work and cannot find a solution to this Firefox problelm. Maybe Mozilla can help me. Anyone have any answers? I use a HP Laserjet 2300L.
Thanks.
Amy

IPod Cannot Communicate with iTunes

I have been using my ipod/itunes for a while now, but yesterday when I connected my ipod (5th gen Video) to my computer itunes gave me the following error message:
"The software required for communicating with the ipod is not installed correctly. Please reinstall iTunes to install the iPod's software"
Well, I did this it didnt work, same error. So I decided to delete all itunes/ipod software from my computer and reinstalled itunes from my initial cd. Plugged in my ipod, same error. I have gone through the 5 R's those didnt work. My iTunes opens and my library is there but I cannot sync with iPod because they cannot communicate so I cannot add any new music to my ipod. Any suggestions?

okay.
sometimes in earlier versions of itunes (itunes 6.0.x), that message could be caused by a snarlup in the registry keys on the PC. (plausibly in this case something like that might be related to the problem with the administrator account.)
in the 6.0.x days we could get some relief from that sometimes by applying the markinmadison technique:
markinmadison: Re: "The software required for communicating with the iPod is not installed..."
(in your case, rather than reinstalling itunes and the ipod updater, you'd just be reinstalling itunes. the ipod updater is no longer a standalone application ... itunes 7.0.x itself is used for updates and installs.)

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?

I Sight cannot communicate from Imac OS X 10.3.9 to Imac OS 10.4.6

Similar Messages

Maybe you are looking for