I simply want to rename my airport extreme network. Just a name change, that's all

I have the airport extreme base all set up and everything's great. However, I want to rename the network so it is less identifiable as "ours" "out there" to folks who are scanning.
Airport Utility app, I'm sure, is what I open. What do I do from there?
It was tricky setting this up--it's running great-- and I don't want to screw it up.

Open AirPort Utility
Hold down the option key on your Mac while you double-click on the picture of the AirPort Extreme
Click the Wireless tab at the top of the next window
Edit the Wireless Network Name to something that is short and simple
Edit out and reenter the Wireless Network Password. You can use the same password that you used previously if you wish
Verify the password again
Click Update at the lower right of the window and allow a full minute for the AirPort Extreme to restart
Close AirPort Utility

Similar Messages

How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility?

How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility? My company is using an Airport Extreme in our office now and I want to prevent other employees from messing with the network/settings. Is there a way to place a password on the settings to allow only the admin to access the network name and password?

Hi - you have will have to change the device passwords on all the base stations and then don't give them to anyone except the administrators and tell them not to save them on their computers that use the older versions of the Airport Utility - for the newer versions like the mobile apps, as soon as you enter the pasword it is saved and is visible in the advanced pane along with the network password - so if anyone gets a hold of your iPad or iPhone, they can edit the whole network - I have this same issue with my networks in the office and it is inconvenient but doable - I hope this helps

Nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

Time Machine has been working just fine, but in the last week or two it has given up the ghost. I reset the connections to the drive, and it will basically save a few bytes of data and then hang.
Although Apple originally announced, prior to the release of the first 802.11n AirPort Extreme Base Stations (AEBSn), that it would support Time Machine backups to AirPort Disks, they removed that option before they did finally release the base station for sale.
Since then, Apple has posted (as you have noted) that they DO NOT support Time Machine backups to AirPort Disks. As far as I know, they have not changed from that position and those who do these backups find that they become corrupted over time. Sorry, but it sounds like you just confirmed that for yourself.
1) Has one of the recent updates either on the AE (firmware) or OSX disabled this function?
No. Again, this feature has never been supported by Apple for every generation of AEBSn released.
2) Are there any changes I can make to get this working again?
If your data backups are critical to you, then you will want to use a different solution for your Time Machine backup destination drive strategy. I would suggest that you connect your WD My Book directly to your Mac in the mean time.
Your other options would be to either use a Time Capsule (which interestingly does support TM backups to AirPort Disks) or a non-Apple solution like the Drobo FS or HP MediaSmart server.

I can see my airport extreme network, but none of my devices (vista, ipad, iphone, ipod) can connect to it. Why?

I have set up my apple aiport extreme after moving and I can see the airport extreme light is green and I can see the airport extreme network name, but when I select the network, the device cannot connect to it. No error message appears, the device simply is in a constant state of trying to connect to the network.
I can easily connect to the non Airport Extreme network.
Can anyone help?

Try factory resetting, it often helps when changing location.

PROBLEM: Trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network

I'm trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network in my home.
I see the EXPRESS in ARPT UTILITY but when I click on "CONTINUE" or "MANUAL", the only option I'm given is to SWITCH networks, which I do not want to do.
I am using a MACBOOK PRO (MAC OS X 10.6.8)
Can someone offer me help with this?
Thanks!

Hi, I have a similiar setup. When you click onto the express, and it asks you to switch networks, it's not actually asking you to "change" networks. It's just actually switching to the xpress. When the xpress comes up, you'll input the name of your existing network, which you set up and named for the extreme. You'll have to change the extreme to "participate in a network", which is what you'll also do for the xpress. In the extreme under the WDS tab, you'll input the wds mode as "wds main". And then put a check mark in the "allow wireless clients". Where it says wds remotes, you'll input the the airport id's for the xpress's. In each of the xpress's, you'll set up as participating in a wds network. In the xpress's, under the wds tab, you'll set the wds mode to remote, and check
mark in the allow wireless clients. You'll have to input the airport id of the extreme in the wds main block. Under the internet icon on top, in internet conect tab for connect using: airport (wds), connect sharing: off (bridge mode).
Remember to insure that the express's show the same channel as the extreme, if you're using 802.11n (80211b/g compatible). Of course the security that you decide to use should also be the same.

Adding Airport Express to Existing Airport Extreme Network

I have a wireless network created by an Airport Extreme which works well but with a disppointingly small range so I bought an Airport Express with the intention of extending the original network by using the Express as a repeater (which the chap in Regent Street store told me it could do).
However when I try to join the Express to the existing Extreme network, the Airport Express does not even recognise my Airport Extreme network - do I need to connect the two via ethernet cable for this to work and, if so, what is the point of being wireless?

Ok, thanks for clarifying.
Let's double-check your extended network configuration.
o Temporarily connect both the MacBook and the 802.11n AirPort Express Base Station (AXn) directly to an available LAN (opposing-arrows) port of the 802.11n AirPort Extreme Base Station (AEBSn) for the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the AEBSn.
o Choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the AXn, and choose Manual Setup.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network (the one created by the AEBSn) you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

Since the D-Link DCS-932L is accessible on the local network via a web browser, you should be able to access this camera from the Internet if your router has a publically accessible Public IP address. If your ISP provides you with a dynamic Public IP address, you may want to use a DDNS service to make it easier for you to locate your camera whenever your ISP changes your IP address.
Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn).
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, leave the default; this will change to "Custom" once you start entering port values.
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
Click on Update.
To connect to the shared Camera from a remote location using a Mac or PC:
Start your favorite web browser.
Enter either your Public IP address or DDNS-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://123.123.123.123:8888 or http://www.mydtdnsdomainname.com:8888

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

How do I extend my AirPort Extreme network using airport express

How do I extend my AirPort Extreme network using airport express

see http://support.apple.com/kb/HT4145 and other support articles
and/or
https://discussions.apple.com/thread/4462789?start=0&tstart=0
and many other discussions on this forum about this topic.

Constant Disconnection from Airport Extreme Networked iMac (late 2009)

I keep trying to copy fairly large files (2-7GB) over my Aiport Extreme (latest—5th generation) network from a early 2011 Macbook Pro to a 27" iMac (late 2009), and I keep getting disconnected from the iMac while the file is copying. I've tried repairing permissions on every computer in the house and restarting them, but I'm still having issues. I have no issues copying files to another late 2011 Macbook Pro in the house, so it seems to be happening only when I copy them to the iMac. The iMac is running Snow Leopard and the Macbook Pros are running Lion, so could that have something to do with it?
Additionally, I had been trying a wireless extended network with another previous generation Airport Extreme, but I found the connection wasn't much stronger with the extension, so I've just been leaving the second Airport Extreme unplugged. I've had that unplugged for months and haven't had any issues, so I don't think that's the problem.
I'm hoping this isn't a sign of something being wrong with the Aiport card in the iMac. Anyone have any ideas?

Bump?

How to connect a second computer to an airport extreme network

how do I connect my macbook pro to an existing airport extreme network. The AE basestation is showing up on the macbook but when I click on it it tells me its not connected ??

How can one determine if another person has leeched
onto an Airport Extreme network? Is there a way to
list users?
Run Airport Utility, Manual Setup, Advanced button, Logs and statistics, Wireless Clients.
...just changed my password and now my internet
connection is much, much faster...the wireless
broadcasting strength was fine, but, web pages had
recently slowed to a crawl...after changing the
password download speeds returned to normal...could
someone have been leeching on the network?
Sure, if you made a more secure password, that is quite possible. Minimum recommendation is the following:
1. use WPA
2. use a password with no word from ANY dictionary
3. use a password that is a combination of letters (upper and lowercase), numbers and special characters
4. use a password at least 12 characters long.
Better yet, use a "strong" password generator, such as the one at:
https://www.grc.com/passwords.htm

17" flat panel Mac can no longer get on my Airport Extreme network

My 17" G4 flat panel iMac can't get on my Airport Extreme network. It has been on the network for years. All of a sudden I can't get on my own network. The Airport extreme uses a WAP2 Security password. Everything else in my home is on this network ie. Blu-Ray players, Wii, Nintendo DS's, MacBook, Apple TV. The G4 doesn't even have WAP2 as an option! Where did the option go? I really don't wanna set up the network again with a WEP password(That's an option on the G4) and have to reset everything. What happened?

There were two 17" flat-panel G4 iMacs. The earlier of the two (Part# M8812LL/A) had an optional AirPort Card. This card only supports 802.11b and either the WEP or WPA security standards. It does not WPA2. This may be the reason the G4 is not able to connect to your wireless network if you have it configured for WPA2 Personal.
You will need to reconfigure the AirPort to use the "WPA/WPA2 Personal" option.

AirPort Extreme Network Setup Help

Currently I am using my AirPort Extreme to create a wireless network for two houses. The problem I have is the devices in the other house have problems with the base station being in 802.11N so I had to force it into 802.11G only. What I would love to do is setup a device at the other house that connects to my AirPort Extreme using the N standard and then connect all of those devices over there with ethernet cables so I can use N at my house. Are there any devices that I could do this with?

I was kinda hoping there maybe another solution besides spending another $180+

Will Airport Extreme Network with Panasonic Viera TC-P50ST30

Will Airport Extreme Network work properly with Panasonic Viera TC-P50ST30 HDTV?

I don't have this particular model, but I do have a Panasonic TC-P42GT25 plasma which has no difficulties accessing the Internet through my 4th Gen AirPort Extreme Base Station or 4th Gen Time Capsule.

How do I extend my existent airport extreme network by addition of a 2nd airport extreme?

How do I extend my existent Airport Extreme network by addition of a 2nd Airport Extreme?

Can you clarify which version of the AirPort Extreme that you have now along with the model that you plan to use as the second device?
The older "round" AirPort Exteme or the newer "square" version with rounded corners?
Are you planning to extend using wireless only.....or by connecting the AirPort Extremes using a wired Ethernet connection?

I simply want to rename my airport extreme network. Just a name change, that's all

Similar Messages

Maybe you are looking for