I start my mac book pro and sOSX utilities window instead of normal boot. I do not have Time machine back up and reinstalling not hapening. The installation window shows "Select the disk where you want to installl OS X thr is locked reovery?

I dont have time machine set up!!! how I can start in normal mode?
Thanks

Hi there jobe74,
You may want to try resetting the SMC and PRAM on your computer as an initial troubleshooting step. Take a look at the articles below for more information.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
-Griff W. 

Similar Messages

  • I start my mac book pro and the screen goes white with an apple in the middle

    I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging  but then it turns
    off again

    Reinstall Snow Leopard without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I have purchased the last Creative Suite available on disk. It will load on my old Mac Book Pro.  I just bought a new Mac Book Pro and just realized there is no place to put a disk.  Is there any way to load the programs to my new computer?

    I have purchased the last Creative Suite available on disk. It will load on my old Mac Book Pro.  I just bought a new Mac Book Pro and just realized there is no place to put a disk.  Is there any way to load the programs to my new computer?

    Buy an external optical drive such as the Apple USB SuperDrive that is made specifically for that model.
    Use the optical drive of your old MBP to clone the DVDs to USB flash drives, then install from the flash drives.
    Connect both computers to your local network and then share the optical drive to install the software.

  • When I am re-installing the Mac OSX snow leopard onto an older Mac I run into the window that says select the disk where you want to install Mac OSX but nothing is there to select

    I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive.  I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?

    After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.

  • I am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help

    i am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help

    Is your version of Skype known to work with your operating system version?

  • TS3694 Just took my 1st gen iPod out of it's original box, never used before.  Plugged it into my new Mac book Pro and it recognizes that the iPod is in recovery mode but when I click to restore, error 1611 comes up - but that error code doesn't say what

    I had an 8GB 1st gen iPod in it's original box in storage and just took it out to hook it up.  Charged it overnight, plugged it into new Mac Book Pro and it was recognized as being an iPod in recovery but other identifying information was all indicated as "n/a" (so, unknown OS, etc).  Error code 1604 came up so I downloaded iTunes on the Mac Book and it is currently showing version 10.  But now when I try to restore the iPod, error code 1611 comes up and the troubleshooting doesn't tell me what else to try.  The USB connector that came with the iPod was also never used before - brand new also from the box so that should be fine.  I also tried a different USB port on the Mac Book.  Any ideas?

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.

  • Help on Wiping My Mac Book Pro and Reinstalling

    I got a new Mac Book Pro in January.  It is running Lion and OS 10.7.2.  When I got it the Apple Store transferred all my settings, files etc from my previous Mac Book Pro (running Snow Leopard).
    Since getting my new Mac the battery life is terrible (lasting about 2-3 hours after a full charge just when browsing the internet), I constantly get the spinning wheel for what have never been demanding operations in the past, and if charging, my Mac sounds like it's about to take off! It's so noisy (I think it's the fans inside)!
    My assumption is that in moving everything over, disk errors may also have been moved over.  Fixing them in Disk Utilities hasn't worked and so I think it would be worthwhile wiping my whole machine and reinstalling everything.  I am unsure however quite how to do this.  What I could do with easy to see steps please!  I also have some other questions to go with the reinstalling:
    1. I currently have Microsoft Office on my Mac.  If I wipe my machine will I be able to reinstall Office again (bear in mind I had it installed on my old Mac so I don't know if there's a limit to the number of machines you can have it on? Do I need to uninstall it first so as to de-register it?  Or do you never need to de-register the product?
    2. What's the best way to reinstall my files and folders?  I have a time machine but if I back up from my time machine will it bring back the former file corruptions?  Is it best therefore just to drag and drop files off the latest time machine onto a freshly set-up Mac?
    3. Is there anything I need to do/any information I will need for this process?
    I really appreciate the help!

    I had an issue where I had to wipe my mac as well. What you have to do to format the hard drive and reinstall is this:
    Restart the computer while holding down the option key. Choose the recovery disc. Find the main hard disc and hit format. Then you can reinstall Lion via the internet, it takes a while though, my computer took 5 hours or so.
    For your first question, if you got the family version of office, I believe you have 3 computers you can authorize it on. If you are not sure, look it up in the apple store.
    For the second: Time machine would probably be your best option, but I would reccomend restoring from a backup before you were having problems, and restore that one (put new files you need on another external or a digital-online storeage site such as dropbox.) To restore a backup, restart your computer and hold command+R and select "Restore from Time Machine Backup" (for more information go here: http://support.apple.com/kb/HT1427 )
    I don't believe tere is anything else you need to do, but I am new to macs, so I may not be the best source, but this is what I have found/have had to do.

  • What you Mac guru's recommend for cloning a disc? I just bought a Mac Book Pro and I am on the learning curve from Windows. I have always used Acronis as I do an image and if I need to restore, I boot off the bootable cd and restore the image and everythe

    I just purchased a Macbook pro laptop.  I want to be able to backup and restore as I did in windows with Acronis.  In Acronis I take an image of the hard drive, I can then wipe it clean, (format, Dban, etc) and boot off the acronis boot cd, go to my backup and crestore it.  After the restore Windows comes up and everything from my pc before I wiped it is now there again, no reinstalling or configuring anything.  And it takes about 10 mins or less.
    I am looking for a package that will do the same for the MacBook.  Any suggestions please?
    Thank you

    There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
    You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
    If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
    Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • When I start my mac book pro the screen flashes on and off and then a blue color before it open to the log in screen. Sometime a program will shot down buy it's self without me clicking the quit button. Help?!

    When I start my mac book pro the screen flashes on and off and then a blue color before it open to the log in screen. Sometime a program will shot down buy it's self without me clicking the quit button. Help?!

    If you keep getting a 'red' message it means that the HDD is faulty and will have to be replaced.  You will have to format the new HDD in Disk Utility>Erase and then install the OSX and your data from Time Machine.
    Ciao.

  • I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that

    I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that I have to upgrade using the account that I used to buy iPhoto. What do I have to do to upgrade iPhoto?

    Dear Katty,
    Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
    https://discussions.apple.com/thread/3374419?start=0&tstart=0
    https://discussions.apple.com/message/16628399#16628399
    Do you have an idea of how can I solve this problem?
    Thank you very much again.
    Best regards,
    Alfonso

  • Hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

    hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

    On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
    http://liondiskmaker.com/
    Then boot from that on your computer and install
    You need an internet connection to install via Recovery mode

  • I have photshop cs3 for windows but i now have a mac book pro and would like to install it on my mac where can i go to download it for mac and will my prod key work ?

    i have photshop cs3 for windows but i now have a mac book pro and would like to install it on my mac where can i go to download it for mac and will my prod key work ?

    Serial numbers for older versions do not work across platforms.
    At one time, when the product was current, you could get Adobe to switch you to the other platform, but I don't know whether Adobe will do that for old versions.  I do know it's not going to work if you try to use your Windows license for a Mac installation.
    -Noel

  • Hello, I have a new Mac Book Pro and I am unable to get Adobe flash player to work. When I install it says it has been installed. Where should I see that it is installed. Where do I find it?

    Hello, I have a new Mac Book Pro and I am unable to get Adobe flash player to work. When I install it it says it has been installed. But where do I see the application that it is there?

    Check your system preferences.
    My copy of flash installed as a preferance pane.
    If its there you will be able to check the current installed version and set preferences for flash and updating.

  • My hard drive died on Mac Book Pro and I do not have the restore disk?

    My hard drive died on my Mac Book Pro and do not have the resore disk? 

    do you have a backup of your data?  You can get the discs that came with your mac by calling AppleCare and giving them the serial number of your mac.  For a small fee, they will send them to you.

Maybe you are looking for

  • Connecting ipad air to elmo TT-02 document camera

    I have an ELMO TT-02 document camera at school. I want to use my iPad aid with the document camera. I will not be using any other computer with the doc. camera and I will not be using the apple tv.The connections on the doc. camera look like the pic

  • HT204264 Duplicates of edited photos appear in my iCloud Photo Library

    For some reason, when I go to the iCloud website, there are duplicates of edited photos. Also some dates are wrong when imported from the Mac.

  • From TiVo to computer?

    Will Apple TV work from tv to computer? Can I import shows recorded by TiVo into my computer and from there burn dvds (copyrights allowing, etc.)? Assume that if so, this can be done wirelessly. THANKS!

  • Forwarding Agent and Shipping Point

    Hello Experts! Where can I obtain these entire adresses (which table)? Service Agent's or Forwarding Agent's (from Shipment) and Shipping Point entire adress. Regards Ilhan

  • How to see video on Quicktime?

    When I got my Mac recently, it came with Quicktime. With updates my version is 7.0.4. Many times when I open videos in my brower (i.e Safari), the smaller Quicktime player will open and I can hear the audio but cannot see the video. Am I missing some