I started making a movie in the new imovie '10. I opened up the project and can not record any new audio. All the recorded audio and music isn't playing. I can't figure out what's going on, I teach a flipped classroom and need to get these videos done!

I am not sure what is going on, but I need help ASAP!

soon as you start up the computer, keep hitting the F1 key. That should get you into the BIOS.
Also, try disabling Active System Protection for your freezing issues. I'm using XP so I don't know where to tell you to find it in Vista.

Similar Messages

I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

Your only recourse is to force it into DFU mode:
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

Local hostname already in use - can't figure out what's going on

I've been having issues with a wireless router and I think the problem lies somewhere within my computer. As I switch back and forth from trying to connect to the internet via my router or directly connected to my cable modem, I will often get this error:
"This computer's local hostname "xyz" is already in use on this network"
There is only one compuer on the network, however and I cannot figure out what's going on.
I have 2 users set up on this machine, but I'm the admin and acting as such. Even with no other networked equipment hooked up to my Mac (except for the cable modem) this problem won't go away.
I guess my real quesiton is what causes this and where should I go to troubleshoot things?
I'm running 10.4.6, connect to my ISP using DHCP and have the same problem with both a D-Link and Linksys router.
Any ideas?
Thanks!

Thanks very much for your help, fu.
If your previous setup follows a flow like this: RCA
CableModem-->NetGear Router-->AirPortExpress, there's
something misconfigured routing-wise in your network.
You have to decide which device (Netgear or AirPort
Xpress) will handle the routing in your network.
Previous to these problems, that was the basic flow of my network. The netgear router also fed a wired connection into a Wintel PC, and the AirPort Express hosted a wireless network that was extended by a second Airport Express. And that second AE connected to a ReplayTV with a wired connection. And then, of course, the PowerBook got Internet access wirelessly through the AE-hosted network. And that was it.
That network always was configured so that the netgear router assigned IP addresses using DHCP, and the Airport Expresses would not assign IP addresses (i.e., "Distribute IP addresses" was NOT checked when you look at the configuration in Airport Admin Utility).
How big is your network j? just 1 Mac (your
PowerBook)?
That was the state of the network a couple of days ago when I posted this. I have established that the PowerBook gets access to the Internet just fine directly though the cable modem, and just fine when it is the only wired connection to the router.
Let's deal with your Mac first:
Start with your Mac connected directly to the cable
Modem. (When your mac is attached directly to the
Cable Modem, do you use DHCP?)
Go to SystemPreferences-->Sharing and type a Computer
Name other than the default one
Open Applications-->Utilities-->Terminal and type
lookupd -flushcache (press Return) and reboot
the Mac.
I did this.
One way to fix your network is to have the NetGear do
the routing, and the AirPort Express to (just) extend
your (wired) network wirelessly (No routing will be
done from the AirPortXPress, (No distribution of IP
Addresses)
I soft reset both of my Airport Expresses. I configured the first one so that it was hosting a network, but not distributing IP addresses, and the second so that it was extending that wireless network. And I plugged the host AE into the netgear router. And for a little while, that was working.
But then I got a message saying "IP Configuration 192.168.0.4 in use by 00:04:40:06:1f:82, DHCP Server 192.168.0.1". The dialog box with that message will come up periodically as long as the Airport Expresses are plugged into power and one is plugged into the router. Also, I once agaiin received the message saying the local hostname (the completely original one that I had created) was in use, and the name was being changed.
Here is the thing. I cannot figure out what has that ...0.4 IP address and ...1f:82 MAC address on the network. That is not the "Internet port MAC address" or the "LAN port MAC address" for the Netgear router. It is also not the MAC address for either of the Airport Expresses or the PowerBook's internal Ethernet card.
I accessed the router through my browser, and clicked on "Attached Devices." Here is the list of Attached Devices:
# IP Address Device Name MAC Address
1 192.168.0.2 00:11:24:08:4c:88
2 192.168.0.3 00:14:51:6d:15:7c
3 192.168.0.5 00:0a:95:da:4f:24
The first two addresses are the two AE's, and the third is the internal Ethernet card of the PowerBook.
I ran "Netstat" under the Network Utility to get "Routing Table Information," and here is what I get (with some identifying info removed):
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.0.1 UGSc 23 10 en0
127 localhost UCS 0 0 lo0
localhost localhost UH 11 2400 lo0
169.254 link#4 UCS 0 0 en0
192.168.0 link#4 UCS 3 0 en0
192.168.0.4 link#4 UHLW 1 1 en0
192.168.0.5 localhost UHS 0 14 lo0
Internet6:
Destination Gateway Flags Netif Expire
localhost link#1 UHL lo0
localhost Uc lo0
localhost link#1 UHL lo0
link#4 UC en0
justin-and-***** 0:a:95:da:4f:24 UHL lo0
**************bedro 0:14:51:6d:15:7c UHLW en0
link#5 UC en1
justin-and-***** 0:a:95:f3:3e:df UHL lo0
**************bedro 0:14:51:6d:15:7c UHLW en1
ff01:: localhost U lo0
ff02::%lo0 localhost UC lo0
ff02::%en0 link#4 UC en0
ff02::%en1 link#5 UC en1
Any ideas? Thanks again for your help.

Since upgrading to windows 8.1 I can not see any local files in the files window.

I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
If I change sites under local view get error thet dreamweaver can not update cache

Thanks Nancy
It certainly worked in windows 8.
I have deactivated and am trying to reload software inside of windows 8.1.
Will let you know.
Thanks again
Terry
Date: Fri, 1 Nov 2013 12:13:57 -0700
From: [email protected]
To: [email protected]
Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
    Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
    created by Nancy O. in Dreamweaver support forum - View the full discussion
I honestly don't know if DW CS5 is compatible with Win 8.1. The OS compatibility FAQ only mentions DW CS6 & CC.
http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
Maybe someone else can shed more light on this.
Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems with ios7; I can not download any new App

In general, I feel the new ios7 makes my ipod 5 slow, it has had a couple of problems, most of them minor or have a simple solution, or can be ignored while they fix it... what I can not ignore is that I can not download ANY new App...
I have been able to update a couple of them, though they have been very slow, now when I try to download something new, it seems like it'll work, but it never asks for my password as it used to and it never appears in the screen as downloading or anything. It is like if they'd just get stuck and waiting for it to react...
¿anyone else has had this problem? ¿advice? ¿solutions?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App stores and sign ut and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I have a canon 7d and my aperture version 3.4.5 is not recognizing the raw format? The Can not review any raw photo in the adjustments/raw fine tuning controls.

I have a canon 7d and my aperture version 3.4.5 is not recognizing the raw format? The Can not review any raw photo in the adjustments/raw fine tuning controls.

When i click on the adjustments everything is grayed out and the messages states " Image Not Found'.
Are you seeing broken arrows or yellow warning triangles, when you enable badge overlays?
That looks, like your original image files were missing. Are your images referenced or managed?
Create a smart album with the rules "Files status is missing" or "Files status is offline". This will show you any images, where the original raw files cannot be found.

My apple. Version is 4.2.1 and I can not download any thing on it being books, audio books video etc. I mean nothing how can I do it and also upgrade my iPad?

My iPad can not download any thing at all.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Mi Iphone 4s is unlocked to use in Chine where i boght it but i can not use in England. All companies sed me that it is locked. How can i use whith a sim card of UK?

mi Iphone 4s is unlocked to use in Chine where i boght it but i can not use in England. All companies sed me that it is locked. How can i use whith a sim card of UK?

You cannot use a UK carrier sim in Chile unless you are a UK customer and have roaming set up with the UK carrier and the Chinease carriers do not offer unlocking so I doubt the iphone is unlocked

TS1398 My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

I'm using Windows Firewall and even turning it off does not change the situation and I can not access any new emails.

I was using TB on my XP machines and they went down so I was forced to move to a Vista based laptop. It eventually crashed and so I converted my computer from Vista to win 7, Home premium. In both iterations, I have been able to set up TB and transfer all the data & emails that was in them at the time ( from the bood drive that was in the xp machine). but since that time I have not been able to access anything new after that date. It will neither send nor receive emails from both gmail and cox.net accounts that I have. I've attached the settings below. I tried changing some things on [email protected], so that info is obviously wrong.
I've tried deleting TB but apparently have not been able to remove all the data because when I reload it, it just comes back immediately the way it was.
Any help would be appreciated. I really like how TB works and would love to be able to use it again.
Jim
Application Basics
Name: Thunderbird
Version: 31.3.0
User Agent: Mozilla/5.0 (Windows NT 6.1; rv:31.0) Gecko/20100101 Thunderbird/31.3.0
Profile Folder: Show Folder
(Local drive)
Application Build ID: 20141127140543
Enabled Plugins: about:plugins
Build Configuration: about:buildconfig
Memory Use: about:memory
Mail and News Accounts
account1:
INCOMING: account1, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
account2:
INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
account3:
INCOMING: account3, , (imap) imap.googlemail.com:143, plain, passwordCleartext
OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
account4:
INCOMING: account4, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
account5:
INCOMING: account5, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
account6:
INCOMING: account6, , (imap) imap.cox.net:993, SSL, passwordCleartext
OUTGOING: smtp.cox.net:465, SSL, passwordCleartext, true
Crash Reports
Extensions
Important Modified Preferences
Name: Value
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
extensions.lastAppVersion: 31.3.0
font.internaluseonly.changed: true
font.name.monospace.el: Consolas
font.name.monospace.tr: Consolas
font.name.monospace.x-baltic: Consolas
font.name.monospace.x-central-euro: Consolas
font.name.monospace.x-cyrillic: Consolas
font.name.monospace.x-unicode: Consolas
font.name.monospace.x-western: Consolas
font.name.sans-serif.el: Calibri
font.name.sans-serif.tr: Calibri
font.name.sans-serif.x-baltic: Calibri
font.name.sans-serif.x-central-euro: Calibri
font.name.sans-serif.x-cyrillic: Calibri
font.name.sans-serif.x-unicode: Calibri
font.name.sans-serif.x-western: Calibri
font.name.serif.el: Cambria
font.name.serif.tr: Cambria
font.name.serif.x-baltic: Cambria
font.name.serif.x-central-euro: Cambria
font.name.serif.x-cyrillic: Cambria
font.name.serif.x-unicode: Cambria
font.name.serif.x-western: Cambria
font.size.fixed.el: 14
font.size.fixed.tr: 14
font.size.fixed.x-baltic: 14
font.size.fixed.x-central-euro: 14
font.size.fixed.x-cyrillic: 14
font.size.fixed.x-unicode: 14
font.size.fixed.x-western: 14
font.size.variable.el: 17
font.size.variable.tr: 17
font.size.variable.x-baltic: 17
font.size.variable.x-central-euro: 17
font.size.variable.x-cyrillic: 17
font.size.variable.x-unicode: 17
font.size.variable.x-western: 17
mail.openMessageBehavior.version: 1
mail.winsearch.firstRunDone: true
mailnews.database.global.datastore.id: ad1f0fc4-c403-47b2-90a5-b85ce5567e0
mailnews.database.global.views.conversation.columns: {"threadCol":{"visible":true,"ordinal":"1"},"flaggedCol":{"visible":true,"ordinal":"3"},"attachmentCol":{"visible":false…
mailnews.database.global.views.global.columns: {"threadCol":{"visible":true,"ordinal":"1"},"flaggedCol":{"visible":true,"ordinal":"3"},"attachmentCol":{"visible":false…
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1419701657
places.history.expiration.transient_current_max_pages: 93896
plugin.importedState: true
security.default_personal_cert: Select Automatically
security.disable_button.openCertManager: false
security.disable_button.openDeviceManager: false
Graphics
Adapter Description: ATI Radeon 3100 Graphics
Vendor ID: 0x1002
Device ID: 0x9613
Adapter RAM: 256
Adapter Drivers: atiumdag atidxx32 atidxx64 atiumdva atiumd64 atiumd6a atitmm64
Driver Version: 8.632.1.2000
Driver Date: 8-17-2009
Direct2D Enabled: Blocked for your graphics driver version. Try updating your graphics driver to version 10.6 or newer.
DirectWrite Enabled: false (6.2.9200.16571)
ClearType Parameters: D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 300 ] D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 300 ]
WebGL Renderer: false
GPU Accelerated Windows: 1/1 Direct3D 9
AzureCanvasBackend: skia
AzureSkiaAccelerated: 0
AzureFallbackCanvasBackend: cairo
AzureContentBackend: cairo
JavaScript
Incremental GC: 1
Accessibility
Activated: 0
Prevent Accessibility: 0
Library Versions
Expected minimum version
Version in use
NSPR
4.10.6
4.10.6
NSS
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC
NSS Util
3.16.2.3
3.16.2.3
NSS SSL
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC
NSS S/MIME
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC

Hi Andre V.,
When having iTunes Store connectivity issues, the following articles provide the best solutions:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

Admin Tool can not create any new database or model [nqserror 46131]

Hi everyone!
I can not create anything new in each layer on the admin tool. It marks unknown error.
When I try to import metadata it send the message: [nqserror 46131] unresolved hostname, everything in online mode. I can modify everything offline, then replace the rpd and I can create reports in Answers. But I need to do all of these online mode.
Everything else works well (Answers, Dashboards, Publisher). The server name is correctly put in the instanceconfig.xml.
OBIEE Version: 11.1.1.6.0 (upgrade recently from 11.1.1.5). The scheduler does not start since migration.
Server OS: Red hat enterprise edition
Regards,
Edgar Tercero
Edited by: 958457 on 11-sep-2012 12:04
Edited by: 958457 on 11-sep-2012 14:13

Thanks but it not solve my problem.
I detect no problem in my enviroment variables in the bi-init.sh
This is what my admin tool log says:
[OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 690] [nQSError: 43113] Message returned from OBIS. [[
[nQSError: 46131] Unresolved host name: vrnmobiee. Could not get details about the specified host]]

Can not copy any file or empty the trash

Hello,
I'm using a Macbook (white) with OSX 10.6.4 and am having an extremely annoying problem which has three symptoms:
1. I *can not empty the trash* (safely or not) at all.
2. I *can not copy any file*, anywhere.
3. I *can not move anything to the "Applications"* folder.
I try restarting the computer, repairing the permissions, running the latest version of Onyx and so on, but nothing works. I always get the following error message (when copying a file or emptying the trash)
"The operation can't be completed because you don't have the permission to access some of the items".
And this even though I repaired the permissions three times today.
To be honest, this makes my Mac pretty useless, and is very frustrating.
Can anybody help? I've browsed a lot of other threads about this, tried everything, but to no avail.
Come on, this is my first Mac, don't tell me I have to reinstall the OS from zero, Windows-style.

Those are the normal permissions but if you are logged in as admin, hit the unlock button and enter your password they should no longer be greyed out.
You can try chmoding them from root through the terminal if you are up for it. I'd also try booting up in SafeMode and seeing if that allows access.

Post your ship by date, device and results - see if we can figure out what is going in with stock

Hi everyone. I have been trying to get information on stock and delivery with limited results. Different answers from customer service. Maybe we can help each other by posting the order date time, consumer vs business account, iphone 5s color and size and the "will ship by date". Let us know if you received the iphone 5s or if your date changed. I ordered on 9/29 at 8am, business customer, will ship by date of 10/7' iphone 5s space grey 64gb. No change in date or emails received with an update. No delivery of device I ordered a bundle with black case and charger.

Hi Everyone. I wanted to give you a quick update. As I stated in the original post, I ordered a grey iPhone 5s 64GB on 9/20 at 8am EDT (first time business customers could order). Received an email confirmation at 8:17 am confirming order and "will Ship by" of 10/7. I have heard nothing since. In fact, the online system still says expected ship date is 10/7. After talking to Vz support via DM over the weekend (post above) and then calling business support yesterday, I have come to find out that Verizon held the order until 10/9. They say the fraud department held it, but cannot explain why or why it took them two plus weeks to release it (account in good order and not a single communications via email, to the cell number or the land line of thee master account which is my desk). There was no issue ever identified. They are telling me that the order from their view was placed on 10/9 and I have to wait until 10/28 to get the device. To be clear, this is the same date for the "Will ship by" if I placed a new order today. Pretty sad. They are taking no responsibility nor are they honoring the orders in which they are placed. The customer service reps tell me they have no way to submit to get the order bumped up in priority with the warehouse or fix the issue. The reps have pointed to fraud prevention department as the problem (but they have no way to contact them), indicated that online ordering is yet another department with no contacts, etc. After talking to two reps and a manager (all very nice and well-intentioned), looks like I'm just going to get screwed and have to wait a few more weeks. It is unfortunate that "we" cannot trust orders placed online with Verizon, receive updated, clear and accurate communications or assume that Verizon will honor orders in the order placed. My only suggestion is that you have to call customer service to verify any orders and stay on them. My only hope is that somehow someone in Vz senior manager is paying attention to what is happening and attempts to fix the problems. I'm contemplating moving to another provider that apparently has stock online today. Don't want to, but losing faith quickly.

My pages documents on my ipad wont sync to icloud. Some documents have had the upload icon on them for over a month. It was all working fine but now I cant figure out what is going on.

MY pages documents on my ipad wont sync to icloud. Some of the documents have had the upload icon on them for over a month. It was all working fine a month or so ago but I cant figure out why it wont work now.

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

Need help figuring out what's going wrong

With the explicit help/instructions of some users here I've managed to build some sort of a tokenizer.
There are a couple of mistakes in its rules which I am aware of, and probably it could be a lot more efficient, but I've found something funny. When copying a sentence from a WSJ article:
"Book publishers were locked in 11th-hour negotiations with Apple Inc. that could rewrite the industry's revenue model after the technology giant unveils its highly anticipated tablet device Wednesday."
I got:
Book
publishers
were
locked
in
11th-hour
negotiations
with
Apple
Incorporated
that
could
rewrin
exemplificationthe
industry
is
revenue
model
after
the
technology
giant
unveils
its
highly
anticipated
tablet
devin
exemplificationWednesday
./sd
Remarkably, it rewrites the "ite" from "rewrite" to "in exemplification", just as "ice" from "device".
Any thoughs as to why this mystery occurs?
Here's the code:
public static void main(String args[])
         InputStreamReader istream = new InputStreamReader(System.in) ;
         BufferedReader bufRead = new BufferedReader(istream) ;
         try {
              System.out.println("Enter input.");
              //read input
              String input = bufRead.readLine();
              //rewrite abbreviations
              input = input.replaceAll("dr.", "doctor");
              input = input.replaceAll("mr.", "mister");
              input = input.replaceAll("e.g.", "exempli gratia");
              input = input.replaceAll("vs.", "versus");
              input = input.replaceAll("i.e.", "in exemplification");
              input = input.replaceAll("Inc." , "Incorporated");
              //more abbreviations to come here
              //rewrite contractions
              input = input.replaceAll("'ll", " will");
              input = input.replaceAll("n't", " not"); // this one needs to be a bit smarter to cover cases like "won't"
              input = input.replaceAll("'s", " is"); // this one needs to be a lot smarter, since now it incorrectly rewrites "John's house" to "John is house"
              //perhaps rewrite some more stuff here
              String[] tokens = input.split("(?=\\p{Punct}(\\s|$))|\\s+");
              for(String t : tokens) {
                   //maybe rewrite back the stuff rewritten above?
                   //mark/tag sentence delimiters alreadys
                   if (t.equals(".") || t.equals("?") || t.equals("!") || t.equals(":") || t.equals(";")){
                        t = t + "/sd";
                   System.out.println(t);
         catch (IOException err) {
              System.out.println("Error reading line");
         }

You're passing a regular expression into the replaceAll function (not just a normal String), so the "." you use in "i.e" really means "any character".
To mean literally a dot, you have to escape it: "i\\.e".
This problem will also happen in any of the other regular expressions with dots in them. So for example, "e.g." will replace "eggs", "edge", and "ergo" with "exempli gratia" as well.
Read all about it here !
PS- You might want to try using more meaningful post titles in the future...

I started making a movie in the new imovie '10. I opened up the project and can not record any new audio. All the recorded audio and music isn't playing. I can't figure out what's going on, I teach a flipped classroom and need to get these videos done!

Similar Messages

Maybe you are looking for