I stay in hotels alot and use my Airport Express to hard wire into hotel network. But hotels seem to have a sensor that will not allow any other device like my I-phone, I-pad to connect. Just one device and that's it. Is there a setting to cure this?

I stay in hotels often and use my Airport Express to hardwire into the hotel's network. This seems to work fine and allows my Macbook Pro to work wirelessly.
The problem is I cannot then hook up my Iphone or Ipad to the network. It seems the hotels have a sensor and only allow one device on their network at a time. Is there a setting in the setup of my Airport Express that might fix this problem?

If you have the AirPort Express setup in Bridge Mode, try changing the Connection Sharing setting to "Share a public IP address"
AirPort Utility - Manual Setup
Click the Internet icon
Connection Sharing = Share a public IP address
Update
You will probably get a message about a Double NAT error. Click to "ignore"
This setting might allow mutliple devices to connect and may not. It's worth a try...I have about a 60-70% success rate at hotels with this setting.
Unfortunately, as you note....hotels have become a lot smarter about connections to their network. At some point, they probably will not even allow another router to connect at all.

Similar Messages

My phone keep asking me to sign in to itunes store and will not allow me to download apps. it sends a message saying "Cannot connect to itunes store" what do i do?

my phone keep asking me to sign in to iTunes store and will not allow me to download apps. it sends a message saying "Cannot connect to itunes store" what do i do?

Remember, any purchased item from the itunes store is forever associated with the Apple ID used to buy it. So when you get prompted for an ID/password and it doesn't accept it, then you are using the wrong ID.
Go to Settings>iTunes and App Stores, be sure it's logged into the ID you have set on the iphone (since that one seems to be connecting with the right ID). If you've done this, then you might wait a bit to see if the "cannot connect to .. store" message has to do with internet connections.

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3.

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3. Any suggestions?

Solution discovered. Faulty connector cable. Tried a different one and it worked.

I have lightroom 5.7 installed, and have just downloaded / installed Lightroom CC, but although lightroom 5 runs ok, Lightroom CC will not run, any ideas please

I have lightroom 5.7 installed, and have just downloaded / installed Lightroom CC, but although lightroom 5 runs ok, Lightroom CC will not run, any ideas please.

What seems to be working for many users (myself included) is to sign out of CC and then sign back in. After signing back in, LR will run.
John

I have an iPad that will not allow me to accept iCloud terms and conditions. It just says server not available. But on an annoyingly regular basis a pop up asks me to accept term and cond, I go to iCloud and try to but that is when it tells me it cannot c

I have an iPad that will not allow me to accept iCloud terms and conditions. It just says server not available. But on an annoyingly regular basis a pop up asks me to accept term and cond, I go to iCloud and try to but that is when it tells me it cannot connect to the server. Frustrating as I cannot get rid of the pop ups.

Thanks champion! Apple support is useless! Way too difficult to get anywhere with their "support"

I got both a PC version and a mac version in my purchase but once i loaded to my PC it will not allow me to load to my Mac with same redemption number. Is there a way to do that?

i got both a PC version and a mac version in my purchase but once i loaded to my PC it will not allow me to load to my Mac with same redemption number. Is there a way to do that?

I was going to ask a similar question - we bought the boxed version of PSE11 with mac and pc disc - can we install the program on our mac as well as our PC? It's already on the PC but would be very handy to have it on Mac also. Thanks

My new 5c will not text any other phones but other Iphones

my new 5c will not text any other phones but other Iphones

yoga3 wrote:
thinking I may need to call AT&T?
Yep

I initially downloaded the application and was able to gain access to all of my photos through album, photostream, fb, etc. Now it will not pull any. After deleting the app and attempting to download it, it says I must pay for it (again) any help would be

I initially downloaded the application and was able to gain access to all of my photos through album, photostream, fb, etc. Now it will not pull any. After deleting the app and attempting to download it, it says I must pay for it (again) any help would be appreciated.

Sounds like a verification issue on whatever marketplace you bought PS Touch from. Did you try contacting Google or Apple to see what they say?

Upon startup, restore windows... window is flashing with finder icon popping in and out of dock. computer will not allow any selection. What should I do?

On my 2009 Mac Pro, 10.7.5 upon startup, restore windows... window is flashing with finder icon popping in and out of dock. computer will not allow any selection. I'm hoping someone may know a solution.

http://www.apple.com/support/lion/installrecovery/
http://support.apple.com/kb/HT4718
https://support.apple.com/kb/DL1433
http://reviews.cnet.com/8301-13727_7-20081109-263/recovery-options-for-macs-runn ing-os-x-lion/
https://www.apple.com/macosx/recovery/
http://support.apple.com/kb/HT4848

Can I use the Airport Express to create a secure wireless network in a wireless-only hotel?

Can I use the Airport Express to log onto an unsecured hotel wireless network, without an ethernet cable, to create a secure wireless network for my MacbookAir, IPad, IPhone, etc.? If so, how is that done?

will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
The bottom line with a single AirPort Express is no.
The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private" wireless network.

I installed iTunes on new laptop and it will not allow me to put songs to my phone

I installed iTunes on new laptop and it will not allow me to put songs to my phone

Make sure you have the latest version of iTunes, which is available here -> http://www.apple.com/itunes/download/
Then try following the steps in this Apple article to create an account without a credit card -> Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

Using the AirPort Express to Join an existing Wireless Network

Hello,
I am hoping you can provide me with some help on this... I recelty acquired a PowerMac G4 with a 450 MHz processor, CD-RW/DVD-ROM drive, Zip Drive, 1 GB RAM, and two 40 GB HD... The system has OS 10.4 installed, and it is has built-in Ethernet...
I was told I could use the Airport Express to connect to an existing wireless network, so I purchased an Airport Express base Station... Thing is, to e honest, I am having a bit of a problem getting started...
- First, to connect from the AirPort Express to my G4, do I need a special kind of Ethernet cable, or will the usual kind do?
- Second do I need to istall the software first, or have the Airport express connected to the G4 before I do?
How would I go about setting this up, step-by-step?
Any information would be appreciated...
Thanks for your time...

OK, thanks. Hopefully, the Netgear is creating a wireless network using WPA/WPA2 security. That will make it much easier for the AirPort Express (AX) to join the wireless network. It can join networks with using WEP security, but password issues almost always arise using WEP.
Since you must enter the exact security settings and password for the wireless network, it would help tremendously to know this in advance. Otherwise, it's going to be a series of "trial and errors" and likely frustration, later on.
When you have a moment, check the security settings on the Netgear router.
It might be one of the following: WPA2 Personal, WPA/WPA2 Personal, WEP 128, WEP 40.

HT201269 When trying to restore my new device from the old it ask for a password, but everything I try is wrong. It will not recognize any passwords and I have tried everything that I know.

When trying to restore my new iphone from the old, it asks for a password once I try to restore. Every password I try is incorrect. It will not allow me to restore.

This is asked and answered mnay times every day. The forum search abr is on the right side of this page.
Disable your firewall/security software.

HT5934 I downloaded iOS 7 and now I cannot even use my phone at all!! It will not allow me to connect to my ITunes, it will not allow me to do ANYTHING on my phone at all except for make an emergency call!!! I cannot go to my home screen and find my ser

Can somebody plese help me? I can't even get online support because it requires the SN, which I cannot get because I can't get to my home screen!

Thanks so much for your reply, yes I did and that has not worked either . A friend has suggested re installing upgrade, so may try that .

All of a sudden the transform tool and free transform tool are grayed out and will not allow me to scale, rotate, or do anything to an image I just scaled?

I've been using Photoshop for years, but tonight I ran into an issue that I don't understand. I was working with a file that I had been working with for months. I added a new image and resized it to fit as I needed just as I always have (select layer with image > EDIT > TRANSFORM > SCALE.) All was working fine. I added a second image to the file I was working on (I added it by dragging it into the file from another window just as I had added the first image.) However, this time when I tried to select EDIT > TRANSFORM > SCALE this option was not available to me. Only the FREE TRANSFORM PATH or TRANSFORM PATH options were available. When I selected the SCALE in the TRANSFORM PATH menu (just to see what would happen) it started to scale a completely unrelated layer that DID have a path to it. However, the layer of my image was still selected and NOT the layer with the path. This image layer has no path even on it or around it in any way. I tried to select the folder layer and the same thing happened. It selected this one path and tried to scale it. I selected the layer I just previously scaled and tried to scale it again and it will only allow me to select the transform path option. I selected it to see again what would happen and once again it selected this completely unrelated path on a completely different layer. WHAT????? This makes absolutely no sense! I have tried restarting both my computer and PS and it won't stop happening! I really need to get this file finished and uploaded to my developer ASAP so I really hope that someone has some insight as to why this is happening.

hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I stay in hotels alot and use my Airport Express to hard wire into hotel network. But hotels seem to have a sensor that will not allow any other device like my I-phone, I-pad to connect. Just one device and that's it. Is there a setting to cure this?

Similar Messages

Maybe you are looking for