I still can't get an expandable text field working in LifeCycle.... Please Help.
I have worked through several of the questions and answers and have tried to follow but they still dont work. Could I ask if someone could look at my form, fix it for me and then I would be able to see what they done? Its a lot to ask but it would be so much simpler than someone saying do this and then I miss to do something.
I could send a pdf form that has two "need to be expandable". In Acrobat XI. Once I see how you did it, I could work on the rest that I have to do.
What I have noticed so far is.
1. I open a PDF form (2 page) in Lifecycle and change it to an interactive with flowable layout
2.I click on the text field object I want to change and select multi-line and then wrap it in a flowable subform. This starts at start of page 2. I have tried adding all the rest of fields etc to this subform but it doesnt work.
3. If I try selecting ALl and wrapping in a subform and make it flowable....it inserts everything on page 1.
Someone really needs to see my form. I think my problem is....it still tries to lock everything into the named pages.
Again, asking for a lot but any help would be fantastic.
I have watched videos on this
I have read some great replies to others with same problem BUT it just wont work.
email me: [email protected] and I can send the actual form. I have worked for MANY days on this and am done in.
thanks for any help.
merv
Hello there, Tearza.
The following Knowledge Base article provides some great recommendations for contacting Apple Support if you are unable to respond to your security questions for access to your account:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Particularly useful information is provided in this section:
What should I do if I don't remember the answers to my Apple ID security questions?
If you forgot the answers to your security questions, try answering them at least once to see if you can get them right, even if you're not sure you remember the answers. If you're confident that you can't remember them, try one of the following:
If you have three security questions and a rescue email address, sign in to My Apple ID and select the “Password and Security” tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID password, sign in to My Apple ID and select the “Password and Security” tab to reset your security question.
If you have one security question, but don't remember your Apple ID password, contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you forgot your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time, you will not be able to reset your password and will not have access to your account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Similar Messages
-
HT204053 i have put in my apple id and password but still can not get imessage and facetime to work
I have put in my apple id and password but still can not get imessage or facetime to work please help...thanks
Please try to sign in at https://appleid.apple.com
Check if your new username/email address is verfied
If this works, delete your account on your iPhone (Settings > iCloud)
Sign back in -
I have tried to reindex my messages but I still can not get the search function to work in email
I have tried reindecing my messages by rebuilding the library but I still can't get my message function to work in mail. Any proposed solutions much appreciated.
Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock all your user files, reset their ownership, and remove their access-control lists. If you've set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Back up all data.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Can't get macbook past spinning ball at start up.PLEASE HELP
"Can't get Macbook past spinning ball at startup. PLEASE HELP"
Older mac book with (?? 10.5.... ??) Froze up. Force Quit "Kindle", "Sketch up" and "Safari". Have tried to use safe boot but after 5 min. of holding shift key the SBOD (Spinning Beachball Of Death) was still spinning away. Tried to load Mountain lion by means of disc---Didnt have original disc for this macbook; inherited it from deceased family member 2 yrs ago--- but couldn't get past SBOD there either. I am willing to erase all on mac book in order to get it up and running again since all my vital files are in my Mac (desktop) and primary use of macbook tends to be internet use.You could try installing Snow Leopard on the Macbook. Installation DVD is available from Apple:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Are you sure the MB meets the requirements for Mountain Lion?
http://support.apple.com/kb/ht5444 -
Why are songs/albums deleted off of the iTunes store? How can I get them back on the iTunes store? PLEASE help. Thank you.
Perhaps the copyright holders chose to remove them. What album were you after?
tt2 -
How can I create an expandable text field in Acrobat XI?
I am trying to create a text field that expands with the text that is entered. I have found several forums saying to use subforms, but how do I create those? Does anyone know where I can find a really good turtorial for XI?
There are two type of PDF forms: AcroForms that can be created with Acrobat, and XFA forms (static and dynamic) that can be created with LiveCycle Designer. Since the kind you want (dynamic XFA) cannot be created with Acrobat, you'll have to use LiveCycle Designer. Said another way, AcroForms do not support fields that automatically expand based on content. If you want to ask about dynamic XFA forms, you can ask in the LiveCycle Designer forum: http://forums.adobe.com/community/livecycle/livecycle_modules_and_development_tools/livecy cle_designer_es
-
Can't Get My Servlets to Run in Tomcat. Please help...
Hi!
I've been banging my head against the same brick wall for a day and a half now and am getting pretty desperate...
I installed Tomcat 4.1.24 with no problem and successfully ran one or two of the example servlets. However, I can't get my own (working) servlets to run in either ROOT or any other folder that I create under webapps. If I move my servlets into webapps\WEB-INF\classes, though, they run fine!
Using 'x' represent the folder I've created, I have placed a servlet called FirstServlet in x\WEB-INF\classes. I have also placed the following web.xml file inside x\WEB-INF:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>FirstServlet</servlet-name>
<servlet-class>FirstServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>FirstServlet</servlet-name>
<url-pattern>/servlet/FirstServlet</url-pattern>
</servlet-mapping>
</web-app>
[I have also tried omitting '/servlet' above and tried changing the name of the url-pattern.]
In addition to this, I have tried editing the server.xml file by adding the following context:
<Context path="/x" docBase="webapps/x" debug="0"
reloadable="true">
</Context>
Despite all of this, I still continue to get the error message 404: The requested resource is not available.
Can anybody please give me some idea of what I'm doing wrong or am failing to do??
Many thanks in anticipation.
Cheers.
JanHi, Sharnee.
Thanks for taking the time to email me. However, I really don't need to test my servlets, since (a) they all work under the JSWDK Web server and (b) the one that I am attempting to test ('FirstServlet') works fine when I place it in webapps\examples\WEB-INF\classes.
In answer to your previous email, the URL I have used in attempting to run my servlet (with the servlet in ...\webapps\x\WEB-INF\classes, of course) is:
http://localhost:8080/x/servlet/FirstServlet
In desperation, I have also tried each of the following (with similar lack of success):
http://localhost:8080/webapps/x/servlet/FirstServlet
http://localhost:8080/ROOT/servlet/FirstServlet (after copying the servlet into ...\webapps\ROOT\WEB-INF\classes)
http://localhost:8080/webapps/ROOT/servlet/FirstServlet
Any suggestions?? I'm really frustrated, since the basic process that is required seems so straightforward, but simply isn't working for me!
Thanks in anticipation.
Jan -
Can't get the arrangement I want in JPanel. Please Help!
Hi all,
I'm using a GridBagLayout to position several JLabels, JTextFields and JButtons...with the JLabels and it's respective JTextFields side by side and the JButtons at the bottom in a straight column.
Thing is, no matter how I change the GridBagConstraints, the whole thing will still spread out to cover all the space available which is not what I want...is there a way to go about this using GridBagLayout??
I've read about how you use the GridBagLayout in the Java doc but still unsure how the weightx and weighty works...suspect they might be the key to getting the result I want but so far no luck....
can anyone please help? Thanks a lot :Dhi yuhijen,
when i replied to u last time, i ddin't explore the capabilities of the weightx or weighty fields of the GridBagConstraints!!
so i'm sending u a code that'll give u exactly what u had wanted!! :-)
import java.awt.*;
import java.applet.*;
/* <applet code="trialGridBL" width="500" height="400"></applet> */
public class trialGridBL extends Applet{
GridBagConstraints gbc;
GridBagLayout gbl;
Label L1,L2,Blank1,Blank2,Blank3;
TextField T1,T2;
Button B1,B2;
public void init(){
L1=new Label("Name");
L2=new Label("Password");
Blank1=new Label("");
Blank2=new Label("");
Blank3=new Label("");
T1=new TextField(15);
T2=new TextField(15);
B1=new Button("Submit");
B2=new Button("Reset");
gbc=new GridBagConstraints();
gbl=new GridBagLayout();
gbc.gridy=0;
gbc.anchor=GridBagConstraints.WEST;
gbc.weightx=1;
gbl.setConstraints(L1,gbc);
gbl.setConstraints(T1,gbc);
gbl.setConstraints(Blank1,gbc);
gbl.setConstraints(Blank2,gbc);
gbc.gridwidth=GridBagConstraints.REMAINDER;
gbl.setConstraints(Blank3,gbc);
gbc.gridy=1;
gbc.gridwidth=1;
gbl.setConstraints(L2,gbc);
gbc.gridwidth=GridBagConstraints.REMAINDER;
gbl.setConstraints(T2,gbc);
gbc.gridy=2;
gbc.weighty=5;
gbc.anchor=GridBagConstraints.NORTHWEST;
gbc.gridwidth=1;
gbl.setConstraints(B1,gbc);
gbc.gridwidth=GridBagConstraints.REMAINDER;
gbl.setConstraints(B2,gbc);
// now set the layout for the contentPane (by default its BorderLayout)
setLayout(gbl);
// finally add the components
L1.setBackground(Color.orange);
add(L1);
add(T1);
add(Blank1);
add(Blank2);
add(Blank3);
add(L2);
add(T2);
add(B1);
add(B2);
this is for awt, u just change it for swings.
rgds,
JP -
I did an IOS update and now my iPad is stuck in recovery mode and I can't get it out. I have tried to restore through iTunes, but after restore it says it is still in recovery mode. Please help!
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
-
Can't get past "Find My iPod" set-up screen, please help :(
Hi, so I just bought an iPod Touch, to replace my old iPod Nano. I downloaded the latest iTunes, plugged in my iPod, clicked on the iPod's icon in the bar on the left, did the register thing... then it came up with a completely unformatted block of text which looks like this:
"Free Find My iPhone
Free Find My iPad
Free Find My iPod touch
Set up Find My iPhone for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPad or iPod touch.Set up Find My iPad for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPod touch.Set up Find My iPod touch for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPad. Learn More
Not Now
Set up Find My iPhone
Set up Find My iPad
Set up Find My iPod touch
Find My iPhone (or iPad or iPod touch) enables you to locate your iPad with Wi-Fi or iPod touch only when it is on and connected to a registered Wi-Fi network. Find My iPhone is not available in all countries."
This was in the iTunes window. There were hyperlinks (or whatever the in-application equivalent is) on "Learn More", "Not Now", and "Set up Find My iPhone
Set up Find My iPad
Set up Find My iPod touch"
When I click on any of the links, nothing happens I can't get past this screen to sync my iPod. Please help!
When I right-clicked on the "Not Now" link and then clicked "copy link", this is what it copies: javascript:gotoNextStep();
Don't know if that helps at all.
I go through a lot of firewalls that aren't under my control (I use a high school's internet to cut a long story short) if that is relevant.Garygargar is spot on. Just unplugged my network cable and relaunched Itunes. Got past that FindMe screen, plugged the cable back in, wait 10 seconds, and on my way.
I love it when the first google search result is the actual fix for something!
-BS -
I can't get my email since upgrading to ios5. Please help.
I can't get email on my iPhone, iPad and iMac since upgrading to iOS 5. I can send emails, but can't receive incoming mail.
Ok... I just tried connecting my iPod directly to a USB port on the computer rather than via the USB hub I was using and everything is fine. Odd, but I'm happy now.
Thanks,
Evan -
i was on windows 7 and i had to format my computer i put windows vista on and when i downloaded itunes and sync my iphone i lost all my photos music and apps that was on my phone,my itunes account says i have got to accounts on two computers?? is there anyway i can get anything back? please help me. i have tried restore to back up but it is the same????
If they really meant that much to you, they would have been copied off to a computer at the earliest possible opportunity.
I personally find it amazing that people get so upset when pictures "accidentally" get deleted and then scream about how important they are. You wouldn't leave important paper work lying around to be lost/damaged/stolen, so why take a chance with important pictures on a device that can so easily be lost/damaged/stolen, or deleted by a child. -
Can't get java to initiate applet, or even run, please help
I need help, please. Need java to do some organic chem work, and I can't get it to work. I have Java 2 runtime SE - 1.4.1_05, virtual machine 1.4.1_05-b01, and plug-in the same as J2SE. The Web Start file was corrupted when it downloaded, so I removed it from the Add/Remove in control panel. I'm running windows 2000 Pro, I'm not a computer expert (means I need explicit instructions), I'm a vet student trying to do my homework, and study for exams. Any reply here will be very appreciated, or to my e mail [email protected] Thank you, Cindy
There are plenty of people here that can and will help, but you need to tell us what the problem is (details, error messages, code samples, etc)
Here's a general blurb, post back it it doesn't help.
This may duplicate some of what you've already done, if so fine. But please verify you've done exactly what is written or know why you shouldn't before proceeding. You may want to print these instructions before continuing.
Also note that this applies to the currrent java version installed on "standard" windows systems, only.
To download the current version of Java, go here:
http://java.sun.com/j2se/1.4.2/download.html
and click on the word DOWNLOAD in the column labeled SDK in this line: Windows Offline installation (info)
After downloading, click on this page of installation instructions and read through #6:
http://java.sun.com/j2se/1.4.2/install-windows.html
Install the software according to the preceeding instructions. If you encounter
problems, see the section "Troubleshooting the Installation" in the installation instructions.
Below is a Helloworld program, copy and paste it into your editor and save it as "HelloWorld.java" Use capitalization, Java is case-sensitive. If you're using Notepad, quote the name when saving, otherwise Notepad adds ".txt" to the name. Go to DOS/command window and check that you've got the file where you want it and that it's named correctly.
-------save this program as HelloWorld.java--------
public class HelloWorld {
public static void main (String[] args) {
System.out.println("Hello World!");
In the same directory as HelloWorld.java, enter "javac" - the program should print out a list of options, if not, set your PATH - see below.
In the same directory as HelloWorld.java, enter "javac HelloWorld.java" and the javac compiler will create HelloWorld.class. If it was successful it will not give any messages. Check that the file is created.
In the same directory as HelloWorld.java, enter "java -classpath . HelloWorld" with the spaces and the period. The program will run. If it doesn't, recheck that you followed the instructions.
Here is additional information:
The Windows path is a set of pointers that Windows uses to locate programs that you execute, like javac.exe and java.exe. This setting is explained here:
http://java.sun.com/j2se/1.4.2/install-windows.html - 5. Update the PATH variable
(you should have already done this as part of the Java installation)
The CLASSPATH is another set of pointers that is used by Java to find the files that you create and want compiled and/or run. This setting is explained here:
Setting the Classpath:
http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/classpath.html
[NOTE: always start your classpath with ".;" which means the current directory. See my classpath, below]
How Classes are Found:
http://java.sun.com/j2se/1.4.2/docs/tooldocs/findingclasses.html
Examples:
This is my path
PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;C:\BATCH;C:\J2SDK1.4.2_01\BIN;C:\PROGRA~1\UTILIT~1;C:\PROGRA~1\WIN98RK
This is my classpath
CLASSPATH=.;C:\mjava;C:\mnrx;C:\NetRexx\lib\NetRexxC.jar;C:\j2sdk1.4.2_01\lib\tools.jar;C:\NetRexx\NrxRedBk -
Video_TS folder error! can't get a quality burn for my DVD! please Help
I am currently working on a project in DVDSP 3. i have had problems with the computer freezing while trying to burn my DVD. If the computer didnt freeze while burning the Log (while going through the process) would bring up 2 error signs. One was: "The Video_TS folder will not be included in the final disc." And directly after that it would say: "the VOB_DATA.LAY file will not be included in the final disc. The burn was successful but when i viewed it the quality of the image was fuzzy and not up to par with previous burns.
I found out i had a bad hard-drive. So i replaced it. re-formatted my hard-drive and re-installed all my applications (i.e FCP, DVDSP). I re-compressed all my movies and re-created the entire DVD menu. But the problem still persists!
Please HELP!When i am about to burn my project should i choose simply "burn" or "build/format" ?
Either one will create a folder on your harddrive with the TS Folders AND burn.
These warnings signify nothing. They're just to inform you that the certain files used by DVDSP to "contact" your initial build folder won't be included in your TS folders.
I can't figure out why Apple states these warnings - they do nothing but scare people -
Can't get videos from my documents to Itunes! Please help!
I've tried doing file import and it doesn't show up in Itunes. I've also tried dragging the file from my documents to itunes but that doesn't work either. The ipod I'm using is an 80g ipod video, thought I'd include that. Not sure what else I can try if someone could please help me I'd really appreciate it.
Thanks!!What format are your videos on? They need to be Quick Time to go into iTunes to be played, and MPEG4 to be able to transfer to the iPod.
I don't import the files, I use File and Add File to Library - try that.
Maybe you are looking for
-
My Olympic camera SD card doesn't fit into the SD card camera reader. Apple advised me to purchase the product in order to import photos to my IPad. How do I over ride this problem. How do I import photos from an Olympus FE-340 directly to my IPad?
-
Authorizations setting for running the process chain
Hai Iam planning to run the process chain for loading the data into ODS. But i dont have authorization for it. so what are the authorizations i need to run the process chain in my system. And how can i set all those authorizations to my user-id. I h
-
SZA1_D0100-SMTP_ADDR (e-mail adress in business partner)
In need to control that the in the sales order the field SZA1_D0100-SMTP_ADDR (e-mail adress in business partner) is setted. I thinked to use USEREXIT_SAVE_DOCUMENT_PREPARE. In this exit I have on line the structure XVBPA with ADRNR and I haven't on
-
I have Photoshop CC on my Macbook Pro with Retina. For some reason when I am under my name it will not open, however if I log out and go to the guest/user name it opens up just fine. I have spoken with Adobe and they are seeing on their end that th
-
I have a notification on the setting icon
Hi I have a notification that is shoing on the setting icon / apllecation and I don't know if there is something wrong with the seeting, and I go throw all the seeting but the notification won't go . So can someone help to delete it or fix it Please