I still cannot access gov tax form VA-5, although I have the latest updated Adobe Reader version.

Although I have the latest version of Adobe Reader, I still can't bring up the gov form VA-5, which I've always used to file & pay our qrtly state withholdings tax.  I get only a blank, white screen.  Can you help?

Pat, I’m not sure this is what you want, but here it is.
        Operating System -      Windows 7 Home Premium
                                             64-bit Operating System, 6.1.7601
        Browser & Version -    Mozzila Firefox (don’t know version)
        Adobe Reader X1 Version    -    11.0.08
        Link:  I cut and pasted the VA-5 icon that always have used.                                        
            Form VA5
        I sure hope this works, beause I have to file & pay this tax by Oct. 31.
        Thanks for your help!
        Nancy O’Dell

Similar Messages

  • I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

    Dear Ones,
    I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

    see if this is helpful : [http://support.mozilla.org/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • The sound on my Iphone 4 is really quiet and muffled, i have the latest update and have restored it but it is still the same, can anyone help?

    The sound on my Iphone 4 is really quiet and muffled, i have the latest update and have restored it but it is still the same, can anyone help?

    Through the headphones or through the speaker?
    Have you consistently played sound through the speaker at a high volume with a lot of bass?
    Have you tested it with multiple apps/songs/movies?

  • HT6502 I have the iphone 4s. I have tried to update my phone & its now stuck on the connect to itunes screen. Ive tried to restore also. & i still get a error for both of them. I have the latest version of itunes. Ive done all the other steps. Not working

    I have the iphone 4s. Ive tried to update my phone & its stuck on the connect to itunes screen. Ive tried to even restore my phone then update & i still have a error for both of them. I have the latest version of itunes & went through all the other steps. Its still not working & stuck on the connect to itunes & im growing extremly fusterated.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • I have the old I phone 4 when I try to access my I tunes store it will not load Someone please help and yes I have the latest update

    I have the old I Phone 4.  When I try to access my I Tunes Store from the phone it will not load. Please Help

    Hello there, morganbailey02.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • ITunes cannot locate my burner software, and I have the latest update....

    I have operated iTunes for many years, and this is a first.  The new update cannot locate my burner software.  What to do?

    I'm on hold to apple support right now, Michael, to ask a similar question. I was able to back up itunes and mail, but no documents either in pages or in word.  what are you doing?  Fred

  • I just paid for 12 months to be able to open pdf files and I still cannot.  How do I either get my money back or get this adobe reader to work to open pdf files?

    i just paid for 12 months to be able to read pdf files and it is not working. how do i get my money back or get this problem fixed.  i am so tired of trying to see pdf files.Adobe ExportPDF (read only)

    I thought I ordered Adobe Reader.  Had information from your company that I was charged $13.00 and some change, I think that was the amount, after I completed my credit card information.  Can’t find it – guess it wasn’t an email.  Anyway, I will order whatever I have to in order to be able to open the pdf files as I need to see them for my work with the government.  What do I need to do?  I need it today.  And what is the cost for export pdf?
    d
    Linda G. Walston
    Right of Way Agent
    OPTICA Network Technologies
    (214) 673-1319 - Cell

  • Cannot open .orf files in Photoshop CC. I have the latest camera raw (8.2)

    Hello can anyone help or suggest wherre i should look. I am new to Photoshop and the online adobe support cannot help me as they do not support Singapore hours.

    Close and restart Photoshop if you have not already done so.
    In Photoshop, go to the Help - About Plug-in... menu then choose Camera Raw.  What version does it say there?
    -Noel

  • I have the latest update.  Why does my reader still hang up and give me the "Not responding" message.  I'm on Windows Vista.

    This is a most frustrating situation.  Constantly getting the "not responding" message and any further click of the mouse, and adobe reader goes pale and I have to "end process."  What's the deal?  This use to be a very reliable program.  Now, it's nothing but frustrating and bothersome.

    I had the 10.1.10 version and have updated it to the 10.1.11 version.  I
    restarted my computer.  Same old problem.  Adobe Reader hangs up anytime I
    try to move a document to the second page, for example.  Is there an older
    version I can go back to to avoid this problem.  I'm seeking to view two
    documents--both from Windows Publisher saved as pdf files.  No luck
    Bob
    On Tue, Aug 12, 2014 at 10:19 AM, ~graffiti <[email protected]>

  • I have done the latest updates on my photoshop, it is version 14.2.1. What I try to open a file from my Nikon D800 camera NEF file, I get a message saying Photoshop cannot open this file.Can anyone help me with this?

    The message says Ïf you are attempting to open a RAW file, make sure you have the latest update installed. I have completed all the latest updates today but still get this message.

    Sorry to hear your Adobe experience has been less than stellar.  I'll try to help...
    1.  Photoshop 14.2.1 is now two releases out of date.  You might want to go to your Creative Cloud application and ask it to install Photoshop CC (2014).  Earlier this year Adobe released 2014.0 as a separate install that can live side by side with 14.2.1.  Then just a few days ago they released 2014.1 as an in-place upgrade to 2014.0.
    2.  You may be able to update Camera Raw directly to version 8.6 by a link from this page:
    Keeping Photoshop Up-To-Date
    Best of luck to you.  Please let us know here if these things help.
    -Noel

  • I am trying to access a webpage but it keeps saying I need a client certificate. Even after I click 'continue', I still cannot access the webpage.

    I am trying to access a webpage but it keeps saying I need a client certificate. Even after I click 'continue', I still cannot access the webpage.

    https://etivity.sul.com.au/
    It's to access my work rosters.

  • I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What  to do?

    I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What  to do?

    I am getting the same error message - error 7, Windows error 193 running iTunes on a PC Laptop (HP) which has been running iTunes previously for at least 2 years. 
    I followed the Apple support page and uninstalled (in order) all Apple programmes specified, rebooted, then re-installed.  Two additional errors crop up in re-installation, the first one is to do with Apple Mobile Support Device Services.  It seems that this might be rectified by plugging in said devices before finishing the re-install.  The second reads iTunesHelper was not installed correctly please re-install iTunes.  This persists. I cannot uninstall iTunesHelper using the Control Panel, but I can delete it using Windows.  However, after re-installing again, it still won't run and the original error comes back.  I've downloaded and uninstalled 15 times now and this is taking far too long to be acceptable. 

  • Cannot open/view/access interactive pdf form on iMac after updating Adobe Reader to 11.0.06.70

    Cannot open/view/access interactive pdf form on iMac after updating Adobe Reader to 11.0.06.70. Please help!

    Here is what it says:
    Please wait...
    If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
    You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html.
    For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html.

  • "Site System Status Summarizer still cannot access storage object" after DB Move

    After our SCCM server was up and running, the DBAs moved the SQL Site Database to a new drive which is a supported SQL Operation according to this Support document:
    https://support.microsoft.com/en-us/kb/2709082
    Using the methods described by the above document we were able to restore functionality to SCCM but I am still seeing Informational messages in the SMS_SITE_SYSTEM_STATUS_SUMMARIZER component.
    Site System Status Summarizer still cannot access storage object "\\<SQLServer>\S$\SMS_<SQLServer>" on site system "\\<SQLServer>". The operating system reported error 67: The network name cannot be found.
    Possible cause: The site system is turned off, not connected to the network, or not functioning properly.
    Solution: Verify that the site system is turned on, connected to the network, and functioning properly.
    Possible cause: Site System Status Summarizer does not have sufficient access rights to connect to the site system and access the storage object.
    Solution: Verify that the accounts are properly configured to allow the site to connect to the site system and access the storage object.
    Possible cause: Network problems are preventing Site System Status Summarizer from connecting to the site system.
    Solution: Investigate and correct any problems on your network.
    Possible cause: You took the site system out of service and do not intend on using it as a site system any more.
    Solution: Remove the site system from the list of site systems used by this site; this list appears under Site Systems in the Configuration Manager Console.
    Possible cause: You accidentally deleted the storage object or took the storage object out of service.
    Solution: The components will eventually detect that the storage object no longer exists on the site system and will either recreate it or choose a new storage object. Monitor the status messages reported by other site components to verify that this
    occurs properly.
    The storage object has been inaccessible since "14/03/2015 1:23:20 AM". When you correct the problem and Site System Status Summarizer successfully accesses the storage object, Site System Status Summarizer will set the storage object's status
    to OK, providing that the storage object has sufficient free space.
    I have run a site reset to try and fix this but the site server still seems to be trying to access files on the old drive. Is there a method to get SCCM to start looking for these files on the NEW DB drive (H$) in my case?

    Was a site reset performed at all yet? This has to be done. 
    Torsten Meringer | http://www.mssccmfaq.de
    Yes, I tried a site reset prior to making this post. I was sure I had read that this should resolve the issue but unfortunately it seems a site reset did not resolve the issue.
    Since we are running a virtualized environment, is it possible the old drive has to still exist prior to running the site reset? If we add a small "S" drive back to the server and run the site reset again, might that help?

  • Cannot access iphoto: Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5

    Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5 or 6 times already and end up with the same result. NOTHING...
    Library Upgrader IS NOT WORKING. Please help

    Thx Leonie,
    Surprisingly, I just went to the crash reporter and there were no reports re: the iPhoto issue. This is the only report I found, which I not sure is related to the iPhoto issue:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
      <key>OSBuild</key>
      <string>10.10.2:14C109</string>
      <key>appRecords</key>
      <array>
      <array>
      <string>AppRecord</string>
      <string>DiskImageMounter</string>
      <string>com.apple.DiskImageMounter</string>
      <string>396</string>
      <string>10.10.1</string>
      <integer>7</integer>
      <integer>0</integer>
      <integer>1</integer>
      <integer>0</integer>
      <integer>0</integer>
      <integer>0</integer>
      <integer>0</integer>
      <integer>0</integer>
      </array>
      <array>
      <string>AppRecord</string>
      <string>com.apple.ncplugin.weather</string>
      <string>com.apple.ncplugin.weather</string>
      <string>32.3</string>
      <string>1.0</string>
    As for the TimeCapsule indeed, I use it as an extended drive but I'm surprised it would be considered a FAT-32 formatted drive as this is an Apple device.
    I asked the apple reps if I could use the TimeCapsule for such purpose and no one raised a concern. It's also surprising that I didn't have an issue with this prior to the upgrade to OS X Yosemite.
    Having said the above, thank you for your help - if the TimeCapsule is indeed the issue, perhaps I can solve the issue by transferring the iphoto library to an OS extended hard drive.

Maybe you are looking for

  • Relatório de adiantamento Cliente

    Caros, Estou precisando fazer um relatório que traga todos adiantamentos que tenha pedidos relacionado . Alguém já conseguiu fazer um desse? Exemplo: SELECT T0.DocNum AS 'Nº ADIANTAMENTO', T0.DocDate AS 'DATA LANÇAMENTO', T0.CardName  AS 'NOME DO CLI

  • Time capsule blinking amber and my wireless network has vanished after factory reset

    Hello,      I have an Apple Macbook aluminum body with a Motorola cable modem hooked up to the Time Capsule which acts as my router. After turning the power off in my home, the internet has not been working. The light on the TC was green, but I had n

  • Setting up iPhoto with saved iPhoto image library

    My 5 year old iMac died and I want to use a backed up iPhoto library on my Mac Book Pro. The library is in Users:\my photos on the new macbook. How do I import the pictures?

  • Abap proxies ( Client and Server proxies)

    Hi Team Good day to you. I am now started doing some example scenarios on ABAP proxies(ie Client and Server proxies). After going through the blogs which are avialable, i am writing this question to you for clarification. As per my understanding, the

  • Tutorial help

    hi everybody i m trying to follow the instructions in the tutorial and trying to run the examples, in the jaxrpc chapter whenever i do a ANT RUN im getting this error - not able to find what package im exactly missing. im loooking for an api - which