I still get an "Alignment Failed" message even after problem is solved

Yesterday, I installed a new 60 black cartridge when the previous one ran out of ink.  Shortly after the new cartridge was installed, I received an "Alignment Failed" error message.  I ran the steps specified in the solution center and apparently solved the problem.
However, I turned on my computer today and got the same message.  I wonder why...
By the way, none of my print jobs have been affected.

Never mind!  I just came back from live chat  with Syed.  During that time, I thought to do a re-scan and this time it was trouble-free.  I will, however, monitor future print jobs and restarts to my computer to make sure it's completely fixed.
And if there's another problem from now on, I know where to go!

Similar Messages

  • I keep getting a signed out message even after doing everything they have asked me to do in the help options

    I have done everything in the help options to fix this sign in problem with the message saying you have been signed out. Is anyone having this issue as well?

    Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
    -and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
    -and 'looping' https://forums.adobe.com/thread/1504792
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • HT4059 I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't

    I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't cheap.

    Hi I had a similar issue to you, I could connect to the router but no internet. Here is my explanation of how I sorted it.....I hope this works for you.
    *To anyone that is reading this it appears that the problem lay in the airport setting: IPV6: set to 'Automatically'. I turned it off (after reading someones plight on MacFixIt) & everything is back to normal.*
    *The worrying thing is although my problem was extreme with other computers on the network being locked out nothing was changed, one minute it worked the next it didn't. Reading on other forums it appears to be a problem with laptops (but I could be mistaken). A lot of people on the Macfixit forum are complaining of network just dropping out even when they are next to the router.*
    *I hope this is the fix (although I dont know why it suddenly went to sh*t!) & I hope my hair pulling & trawling the forums can help someone else out.*
    Much Respect
    Lammo

  • Why do I get a "Transcode Failed" message?

    Dear friends on the forum;
    I have created a complex project in Encore with several levels.  It starts off with an opening menu whose choices are two video files and a link to a sub-menu.  This sub-menu then offers links to several sub-sub menus which, in turn, offer links to a number of video files each.  We are talking a total of 25 movies in all; some short (a minute and a half) some long (90minutes).   The Encore file is on my computer's hard drive and the relevant video files are on an external hard drive, accessed by USB cable.  I have created other DVDs in the past using this arrangement with no trouble.  Why am I having problems now?   Is it because of the complexity of this project?  The total size of these files is about 3 1/2 gb--not too big for the DVD.  I checked the project before clicking "Build" and no problems surfaced.    I am running a Hewlett-Packard HPE-470f computer with a 64-bit Windows 7 o/s.  I have an AMD processor with 3.2 ghz and 8gb of RAM.
    Can anyone help me with this?  Many thanks!
    Regards, Lewis

    That gives me lots of grist for my mill, John.  Thanks!
    Date: Wed, 15 Dec 2010 11:09:15 -0700
    From: [email protected]
    To: [email protected]
    Subject: Why do I get a "Transcode Failed" message?
    I skipped from CS3 (Pentium 4 CPU with 2Gig system ram and 2 hard drives... very slow, but it worked OK for AVI files and overnight Encore encoding) to a new computer for CS5 - read http://forums.adobe.com/thread/652694?tstart=0 
    Since upgrading to CS5 from CS5 may mean a new computer, I can't really advise you on that
    The Windows swap or paging file is where Windows puts things that it needs quick access to... sorta like you put your wallet in your pocket instead of in your dresser drawer, so you have it handy to pay at the grocery store
    The idea is to "spread the load" so no one hard drive is working too hard and becomes bogged down
    Video editing, like "high end" gaming, requires a LOT of computing power
    My previous computer worked for CS3 and AVI... I had to build a new computer for CS5 and AVCHD files
    You should (in my opinion) add a 2nd internal 7200rpm hard drive (never a "green" drive... too slow for video editing) and keep your boot drive for only Windows and software... this is the minimum (again, my opinion... but go read in the hardware sub-forum)
    Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
    - click the embedded picture in Harm's message to enlarge to reading size
    - you need AT LEAST 2 drives for video editing, 3 is better
    - some HD formats work better with (require) RAID
    Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
    A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
    And even more hardware discussion http://forums.adobe.com/community/premiere/hardware_forum
    >

  • Ever since updating to new OS, my iphone won't sync to itunes. When I plug in the phone to the PC, it says I need to update itunes to 10.6.3 or later. I did, but still get the same error message.

    Ever since updating to new OS, my iphone won't sync to itunes. When I plug in the phone to the PC, dialog box says I need to update itunes to 10.6.3 or later. I did that update, but still get the same error message.
    Can anyone offer suggestions?
    Thanks!

    Since it told me to update, I updated to 10.7.
    Then when I plugged in the phone again, it gave the same message that I need to update itunes.

  • My Time Capsule hard drive shows up in Finder, but I can't access the disk.  I get a connection failed message.

    I can not access my Time Capsule from the Finder.  This was working, but on 12/25/2011, the disk can no longer be accessed.  It shows up in the Finder, but when I try to connect, I get a "Connection Failed" message.  If I cycle the power, it works for a little while and then fails again.

    hello
    No i'm connect via ethernet (cable) with TC. The problem is when I try to connect to my TC when I'm away from home like for ex. using a free wi fi spot!! Well in this case the icon appear on my Finder but refuse to connet!! ( connection faild ).

  • I'm getting an error starting Photoshop CS4.  Error number 148.3  Licensing for this product has stopped working.  I rebooted several times to no avail.  Still get the same error message everytime I try to start Photoshop.  I'm using Windows 7 -- 64 bit

    Error number 148.3  Licensing for this product has stopped working.  I rebooted several times to no avail.  Still get the same error message everytime I try to start Photoshop.  I'm using Windows 7 -- 64 bit

    If you can not use CS4 menu Help>Activate|Deactivate to get the install working again you may need to re-install CS4.

  • I get an "install failed" message. "Recovery system can't be created-click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

    I get an "install failed" message. "Recovery system can't be created—click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

    The first time I attempted to install ML was on a late 2011 MBP.  It ran for three minutes then gave me the error message: Could not install OSX due to an unexpected error.  I was using the original ML install app, not a USB or other drive.  
    After a couple of restarts wiht the same result I saw a message to the effect that the install was trying to close open apps.  I closed apps  manually a few times to no avail.  I shut down instead of restarting then booted into Safe mode (hold down the shift key when starting) and that did it.  The install went smoothly after that. 
    I since installed ML in two iMacs using a cloned copy of the install app on a USB drive.  This time I shut down the computers and booted into Safe Mode first and there were no problems. 
    I don't know if this issue is the one causing you these problems but it is a simple enough solution to try.
    Jay

  • I keep getting a filter fail message when i try to print

    i cannot print, i have a new mac and i need help, can someone help me out?

    Hi @pkjbadala ,
    I see that you are getting a filter failed message, when you try to print. I will certainly do my best to help you.
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer..
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
    Try and print a document.
    How is the printer connected? (USB/Ethernet/Wireless)
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Trying to update Photoshop CS6 i repeatedly get an "Update Failed" message.

    When trying to update Photoshop CS6 i repeatedly get an "Update Failed" message.  Whats wrong?  Is it because I alread have Photoshop CC installed?

    Haazk385 I would recommend reviewing the installation log files for the update you are attempting to apply.  Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to locate and interpret the installation log files.  You are welcome to post any specific errors you discover to this discussion.

  • Does anyone know how to update OSX Mountain Lion 10.8.1. to 10.8.2. on a late 2012 Mac mini. All I get are 'not compatible' messages even using supplementary updates etc?

    Does anyone know how to update OSX Mountain Lion 10.8.1. to 10.8.2. on a late 2012 Mac mini. All I get are 'not compatible' messages even using supplementary updates etc?

    It appears that many of the problems with the HDMI are the "monitors" that are being used. Samsung and Vizeo both DO NOT support a computer input on HDMI only VGA. There probably are others, manuals must be read to confirm compatability.
    I strongly believe that the reason the 10.8.2 update was pulled is due to the fact (it happened to me) that the new Disk Utility creates a Fusion drive if aftermarket SSDs are added to the system. I think Apple wants this propriatary Fusion Drive to be something you buy from them not a "homebrew" for lots less money.

  • Hi I am getting an update failed message (49) when trying to update photoshop after installing and whenever I start photoshop and try to access the file menu it crashes

    Hi I am getting an update failed message (49) when trying to update photoshop after installing and whenever I start photoshop and try to access the file menu it crashes

    Duplicate thread.

  • HT1645 whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing.  I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

    whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing.  I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

    Welcome to the forums.
    Looks like that error message does refer to encoding (see http://support.apple.com/kb/HT1645) but a problem could be that your video has to be reloaded into iDVD if you started the encoding process and then switched settings.  You could start a new iDVD project, or try deleting encoded assets.
    Let's start from the beginning -- what length of video are you trying to fit on the DVD? (this will indicate what encoding options you have).  Double layer DVDs can be finicky and are used for video more than 2 hrs long.
    Use good quality media -- Verbatim is often recommended around here, and I've used Sony DVD-R with good results.
    For a detailed treatise, see:  https://discussions.apple.com/thread/3926901?tstart=0
    John

  • Why do I keep getting an "authentication failed" message when trying to join my network?

    Why do I keep getting an "authentication failed" message when trying to join my network?

    You may have to shut your computer off and pull the power adapter from both your ISP's Modem and your Router and wait 5 minutes and restart them in the following order.
    1st your ISP's Modem and wait a minute to get your signal and lights.
    2nd do the same with your Router and again you have to wait the minute.
    Last restart your computer and boot in OSX use Safari.

  • I keep getting an "Update Failed" message when trying to update my apps using Creative Cloud.

    I keep getting an "Update Failed" message when trying to update my apps using Creative Cloud.

    [ Mac 10.9.3 / Indesign CC update fail / Premiere update fail / Adobe Media Encoder 7.2.2 update fail ]
    Adobe Media Encoder was the problem for me. There's no separate uninstaller for AME. My ID CC and Premiere couldn't be updated (for the AME7.2.2 update as the only change). MCMHMPEGVideoCodec.framework seemed to be the factor.
    I uninstalled Premiere (only), after having manually removed MCMHMPEGVideoCodec.framework from inside AME. After boot I installed it again and voilà, both (ID & Premiere) updates went trough fine. The MCMHMPEGVideoCodec.framework was on place inside AME too.

Maybe you are looking for