I still need help guys ... cannot sync....

i understand that when i plug my ipod into the usb it is ment to come up with '''' do you want to sync your ipod'''''' THIS DOESNT HAPPEN NOTHING ABOUT SYNCING APPEARS  ALL THAT IT SAYS IS ''' DO YOU WANT TO IMPORT PICTURES FROM YOUR IPOD ''''                     PLEASE ANY IDEAS ........

If the iPod does not appear in iTunes then:
iOS: Device not recognized in iTunes for Windows
To sync:
iTunes 11 for Windows: Syncing overview\
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

Similar Messages

  • Still need help with case sensitive strings

    Hello guy! Sorry to trouble you with the same problem again,
    but i still need help!
    "I am trying to create a scrypt that will compare a String
    with an editable text that the user should type to match that
    String. I was able to do that, but the problem is that is not case
    sensitive, even with the adobe help telling me that strings are
    case sensitive. Do you guys know how to make that comparison match
    only if all the field has the right upper and lower case letters?
    on exitframe
    if field "t:texto1" = "Residencial Serra Verde"then
    go to next
    end if
    end
    |----> thats the one Im using!"
    There were 2 replys but both of them didnt work, and the
    second one even made the director crash, corrupting even previously
    files that had nothing to do with the initial problem..
    first solution given --
    If you put each item that you are comparing into a list, it
    magically
    makes it case sensitive. Just put list brackets around each
    item.
    on exitframe
    if [field "t:texto1"] = ["Residencial Serra Verde"] then
    go to next
    end if
    end
    Second solution given--
    The = operator is not case-sensitive when used on strings,
    but the < and > operators are case-sensitive.
    So another way to do this is to check if the string is
    neither greater than nor less than the target string:
    vExpected = "Residencial Serra Verde"
    vInput = field "t:texto 1"
    if vExpected < vInput then
    -- ignore
    else if vExpected > vInput then
    -- ignore
    else
    -- vExpected is a case-sensitive match for vInput
    go next
    end if
    So any new solutions??
    Thanks in advance!!
    joao rsm

    The first solution does in fact work and is probably the most
    efficient way
    of doing it. You can verify that it works by starting with a
    new director
    movie and adding a field named "t:texto1" into the cast with
    the text
    "Residencial Serra Verde" in the field. Next type the
    following command in
    the message window and press Enter
    put [field "t:texto1"] = ["Residencial Serra Verde"]
    You will see it return 1 which means True. Next, make the R
    in the field
    lower case and execute the command in the message window, it
    will return 0
    (true).
    Now that you know this works, you need to dig deeper in your
    code to find
    what the problem is. Any more info you can supply?

  • I actually need help but cannot find the answer. Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as

    I actually need help but cannot find the answer.
    Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
    Thank you.
    ''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

    hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.

  • I need help guys..

    i need help guys....
    Project Specification:
    Develop a software package using HTML, servlet for a company called BookWorm Pte Ltd. This company rents out its books to the general public. This software package allows them to check if books are available in the store. If books are not available, they can join as members and put a reservation for the book. A title can only be reserved by a member. Members are given a userid and password to perform this function.
    Features of program:
    Compulsory:
    1. A main page allowing user to select what they want to do.
    2. For the general public, the program must be able to separately:
    a.      Display all titles in the store. It should include current quantities in the store and status of each title. i.e. Available, on loan, Reserved by someone.
    b.      Display only books that are available for loan.
    c.      Display books that are out on loan but are available for reservation. (These books are not reserved by anyone yet.)
    3. For members of the book store, the program must be able to:
    a.     Request user for userid and password.
    b.     Reserve a book that is out on loan but not reserved by anyone else.
    c.     Cancel his/her reservation.
    d.     View the books he/she has reserved so far.
    Additional:
    1. For book store administrator, the program can:
    a.     Request administrator userid and password.
    b.     Add/Remove members.
    c.     Update members� userid and password.
    d.     Change administrator�s password.
    e.     Change quantity of books whenever it is return or loan out.
    f.     Remove or add in new titles.
    g.     � etc... Features you think are helpful to administrator�
    2. For members, the program can:
    a.     Allow users to send comments to administrator.
    b.     View all books he/she has rented so far.
    c.     Reserve for books already reserved by other members.
    d.     � etc� Features you think are helpful to members�
    Required Database:
    You will need a database with two tables to store information on books and members. Please create the database & tables with the exact names shown below. You can use your own names for any additional tables or fields in the database.
    Microsoft Access Database
    Database name: BookWorm Pte Ltd.mdb
    Table for storing books information:
    Table name for Books: BookRec
    Structure of table for compulsory features:
    Field Name     Type     Explanation
    Title     Text     Title of book
    Author     Text     Author�s name
    Price     Currency     Cost of rental
    Qty      Number     Current quantity in store
    ResvUserID     Number     For storing of member�s userid if reserved by him/her
    Table name for Members: UserRec
    Structure of table for compulsory features:
    Field Name     Type     Explanation
    UserID     Number     Member�s userid
    UserName     Text     Member�s name
    Password     Text     Member�s password

    There's an old saying at the forum:
    Do your homework yourself.
    Post only if you are stuck somewhere... no spoon-feeding.

  • HT204382 i need help guys mi karaoke videos aren't playing anymore how can i download some drivers for it ?

    i need help guys mi karaoke videos aren't playing anymore how can i download some drivers for it ?

    Drivers? You need a program to run them such as K-Jams. Then you will need to check your connections from the laptop to the monitor and make sure your settings are correct in System Preferences.
    Good Luck
    Pete

  • Hii i need help i cannot use my apple id for download on app store because they say i need to verify my account but i don't know how so please somebody can help me? i try to resset my password but that don't help

    hii i need help i cannot use my apple id for download on app store because they say i need to verify my account but i don't know how so please somebody can help me? i try to resset my password but that don't help

    is it asking for ur security questions?

  • Still need help with flash player download

    I'm still having a problem with the flash player, please read my last post below:
    "I've tried everything here & still can't download the flash player. Anytime I try to download it asks me to install ADM add-on and then when I click on that, my computer freezes. How do I enable this add-on without my computer freezing? Can anyone help pls?"

    Thanks a lot for your help, it is truly appreciated.
    Date: Thu, 29 Oct 2009 18:52:38 -0600
    From: [email protected]
    To: [email protected]
    Subject: Still need help with flash player download
    You can set Flash Player to check for updates on the Global Settings Manager panel:
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
    >

  • I still need help with the Dictionary for my Nokia...

    I still need help with the Dictionary for my Nokia 6680...
    Here's the error message I get when trying to open dictionary...
    "Dictionary word information missing. Install word database."
    Can someone please provide me a link the where I could download this dictionary for free?
    Thanks!
    DON'T HIT KIDS... THEY HAVE GUNS NOW.

    oops, im sorry, i didnt realised i've already submitted it
    DON'T HIT KIDS... THEY HAVE GUNS NOW.

  • I cannot connect to app store. I tried all the possible ways to fix these error but still nothing happened. I really need help i cannot update my applications. I'm using iphone 5 ios 8.1.2

    please i really need help!

    I had the same problem on my Mac Pro, iPad, Macbook Pro. Could not load iTunes, App Store or any support community. Called Apple Care and she asked if I had rebooted my router in awhile. I had not. Each of these would load half way and then just stop. She said iTunes and App Store could be stopped as they are different than my Discover or e-Bay accounts, which were fine. So during the 75 min call I pulled the power cord of the Netgear Wi Fi router, let it sit for 2 or 3 min and then replugged the power adapter. In about 4 to 5 min the sites started to load, although not displayed correctly. After quitting and re-starting the apps in question they are working fine again. But this has happened twice now in a 6 hour time period. So give it a try, but also give it a couple of tries.

  • Read every font topic, but I still need help

    I have been at this for about 4 hours, and I need help.
    I read Flash Help and every font forum topic, which say
    Static Text need not use embedded fonts.
    Links to .fla and .swf files below.
    Everything shows up fine in 'Control/Test Movie'
    Using Arial font, I cannot see static text in my test .swf
    file.
    I then embedded Arial (24 pt, bold, italic - 'ArialEmbedded'
    in the library).
    Using that font on Static text, can see the text, but not in
    Arial. It is in TimesNewRoman, regular, non-italic.
    I then used the embedded font in text I described as dynamic,
    but could not see any text.
    Everything shows up fine in Control/Test Movie.
    I get around this by building .gifs using graphics packages
    and importing them,
    but the results are less than desirable. (see layer ".gif
    from outside appl."
    Links:
    http://www.ph4d.com/FlashFonts/TestingText3.fla,
    and
    http://www.ph4d.com/FlashFonts/TestingText3.swf
    I hope it's something I overlooked, and I appreciate any help
    provided.
    Thanks,
    vinceg

    Update.....
    I still cannot see text in .swf on my local machine, but I
    can see it on the web, after posting it, but the text looks awful.
    (The same text in Word lookas fine -
    http://ph4d.com/FlashFonts/TestingText3.doc)

  • I had to remove Mavericks and do a reinstall on 10.8.5 but still need help...

    I have been trying to undo my Mavericks upgrade in October and after considerable effort I am mostly got back to 10.8.5 OS but still need a bit of help. I just want the previous OS back in place then I'll try Mavericks soon....
    1)               I never seem to pay attention so is 10.8.5 the last OSX prior?  As long as it isn't Mavericks, I want to get it installed.
    2)               I had to reformat my iMac so I have a residual elements from 10.9 and one issue that I had before was permissions. Every number of files either on other hard drives or sometimes in my same user folder was asking for permission and authentication to simply move a file.. A popular one you'll see at the bottom the person/whatever/ problem known as fetching.  Could someone just give me the general reason of this fetching and permissions problem that I ran into?  Better yet since I just want to avoid it altogether into the future tell me what's the best way to assure it disappears forever.
    3)          Another, which is kind of a big ticket item for me is the backup/restore/cover your (!!!) system. I was a good little iMac User and had Time Machine backed up for a period prior to the Mavericks install. I'm a little bit upset that TM isn't 100%....but what is...?  I need another backup/restore system in place and that's what I am looking for recommendations on.  An item that saved me a bit was that I had OS 10.8.3 on an external hard drive.  The problem with that one was it was on a partition, on one of the drives requiring to be reformatted.  It worked as a bridge consolidating files and all but was a big headache as a partition on the external. Recovery Disk did it's part but wasn't enough as well.   Is there a simple/easy idea...clone, disk images, boot from an external drive… ?
    4)          iPhoto (9.4.3) currently will not open the libraries which iPhoto (9.5) converted. Is there way to go back?  Seems the App Store and Software update don't like something. I'm getting into a loop with App Store, iPhoto and the OS. Either the software needs operating system ... then the App Store says it's incompatible or some other complaint.  Right now I have 9.4.3 iPhoto installed for OSX 10.8.5 and was only able to create a new library and the converted ones currently do not open.
    Thanks to your help

    10.8.5 is the lates ML edition.  I use TM and also carbon copy cloner as my second backup.  If I were you and you have a TM backup prior to Mavericks I would try another restore at bootup.  You should erase your drive first in that process using disk utitlites and then use TM to put back you apps and files.  The other choice is to do an internet recovery and then use TM to restore your apps and files.  That should fix the permissions issue.  I did the same thing and all was OK including getting my original iPhoto progam (9.4.3), iphoto11 and photos back.

  • ITunes Error Message. Still need help. Please.

    I still haven't been able to use my ITunes for about two months. I need help to fix the problem. Here's what it says when I try to start ITunes:
    Microsoft Visual C+ + runtime library
    Runtime Error!
    Program: C:\program files\itunes\itunes.exe
    This application has requested to terminate in an unusual way. Please contact the application’s support team for more information.
    If anyone can help me with this I would greatly, greatly appreciate it. Thanks.
      Windows XP  

    Have you tried un-installing iTunes, downloading the program again from Apple, and re-installing?
    It's always worth a try, as it should help you clear off anything causing the problem and start again.

  • Still needing help downloading program and using the redemption code given to me on the card I purchased at Home Depot two days ago.

    Still need ing help downloading and installing program from card I purchased at Home Depot two days ago.

    It isn't a good idea to start a second thread on the same topic. You have had responses under the first post. I suggest you go there and continue this discussion.

  • Help - I cannot sync my calander for the 8830

    I just bought this 8830 curve for my wife to uswe with her netscape / aim email. All works fine except for the calander in the options section under wireless syns only allows for the option of "no" There is no yes option for wireless sync - what do I do to fix - she needs her cal to sync real time.
    Again its a netscape email account - mail and contacts work great.
    Leigh

    This wireless sync is will be No option if you're a BIS subscriber. Only BES subscribers (Company setup) are entitled to have wireless sync.
    You need to sync you calender  manually.
    The following steps will help you to configure synchronization -
    1.     
    Connect
    your device using Desktop Manager and click on Synchronization
    2.     
    From the
    menu on the left click Synchronization under Configuration
    3.     
    Again
    click Synchronization button on the right which will give you option to Select
    Device Application that you want to synchronize
    4.     
    Put the
    check mark and you'll get a prompt to Select Desktop Application
    5.     
    Highlight
    the application name and click next button
    6.     
    Under Synchronization
    Option you get Direction of Synchronization
    7.     
    Check
    the radio button with Two way sync 
    Note: above
    mentioned steps are explained as per Desktop Manager 4.5
    Example:
    Synchronize Address Book –
    Connect you HH with
    your desktop Manager in your PC. If you device is set to wireless sync then you
    need to turn off wireless synchronization. To do so go to Address Book
    -> click Menu -> Options -> Wireless Synchronization: No
    -> click Menu and Save the changes.
    Click on the Synchronize
    button on Desktop Manager -> Click on Configuration Tab then click on
    Configure Synchronization -> Click on Choose under Address
    Book (on the right side of the pop up window) -> Click on you organizer
    apps (like, MS outlook, Lotus notes etc) -> Select desired apps -> select Synchronization
    radio button and click OK twice go
    back to Synchronize tab ->click
    on Synchronize Now.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • I cannot sync Xerox M138 with my Macbook Air. Printing is paused and does not resume. Please Help, I cannot sync Xerox M138 with my Macbook Air. Printing is paused and does not resume. Please Help

    I cannot sync Xerox M138 Printer with my Macbook Air. Printing is paused and does not resume. Please Help.

    I FIXED IT MYSELF.
    I simply let the iPod run out of battery.
    Then it said CONNECT TO POWER.
    And then I did.
    And after 15 minutes, it worked!
    Self-solved problem!

Maybe you are looking for