I suddenly can't get any of the websites I use each day on Firefox to load. I tried clearing the cache. No difference. How can i fix?

I use Firefox daily to access many sites. Yesterday it worked perfectly. Today it won't work at all. I just keep getting "Unable to Connect" message when I try to load the sites -- and sites work on other programs (though I need to use firefox to do certain things on some of them...) so it isn't an internet access problem. I've read the help articles and they don't help at all. I tried clearing the cache; it makes no difference. I tried checking that no proxy is highlighted under the advanced access settings. It is, and reviewing that makes no difference. I tried looking to see if Firefox is allowed to access the web thru my windows computer -- but I cant tell what program it would need to connect. And I haven't changed my settings since yesterday -- when it worked perfectly (or seemed to). So that shouldn't be the problem.
Ive wasted most of the morning fighting with this. What the hell is going on here and how can I fix it?

hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions - firefox 23 was released yesterday: [[Fix problems connecting to websites after updating Firefox]]

Similar Messages

  • I can not get any updates and therefor not use Java as it only run updates for Mac 10.7. and later? How do i get the updates to install and use Java?

    I can not get ny updates and therefore not use Java, as it only run updates for MAC 10.7. and later. How do i get the updates to install and use JAVA ?

    In Snow Leopard you update Java from Software Update (in the Apple menu). You can check your version by opening Terminal and typing
    java -version
    (don't get creative and type anything else)
    The latest version is 1.6.0_65.

  • I tried to eject a cd, didn't work so I turned off the computer and now it keeps getting stuck at the gray screen. How do I fix it?

    Here are a few more details. I put in a game cd for a windows computer, once I opened the folder on the desktop I noticed the install application was .exe so I tried to eject the cd but no matter what I tried on the computer it wouldn't come out. I will say though that I didn't try the manual cd eject cause I didn't have anything small to hit the button in the cd drive with. It was getting late so we decided to just turn off the computer and leave it for the next day. I can't remember if we turned the computer off with apple shut down or by holding down the power button but we walked away pretty quickly before it was fully shut down. The next day the computer won't turn on. When I walked into the room I was the computer stuck with a grey background with the apple logo showing and the circular thing under it frozen. Since no one was in the room I held down the power button and turned the computer off. We tried to start the computer again later but again it keeps getting stuck at the same spot. Now when we hold the power button down to turn it off I'm not sure if it's really turning off all the way. The screen goes dark but it sounds like the fan is still going. I tried disconnecting everything but the keyboard and mouse but when I started it up again it got stuck on the grey screen with just the apple logo. I'd really apprechiate help on this cause I live in Germany right now and support call centers work so much worse when you don't speak the language well... Thanks for any help you can give!

    Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
    Lupunus

  • When I move several icons over to the left side of my Navigation Toolbar most of them get covered by the address display. How do I fix this?

    It looks like only about three icons can be to the left of the address bar.

    You can try to restore the default set or delete localstore.rdf:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Adobe Acrobat 8.....I can't get any of the text formatting items into my Toolbar....such as below.

    I can't get any of the above in my Toolbar.  I have everything else.   It was there earlier, then I somehow customized something and they are now gone.  Any way to restore those?  Thank you.

    Up until yesterday, my Word 2003 Toolbar(formatting text, font size, color, etc.) was part of my Adobe Acrobat 8 Toolbar.  I made a change...somewhere and it disappeared.  How can I get it back?  Thank you.  It is the Word Toolbar that is used in this Forum.

  • Just upgraded to 10.6.8.  Had to upgrade Adobe flash player.  Now can't get any sound from websites!

    Just upgraded to 10.6.8.  Had to upgrade Adobe flash player.  Now can't get any sound from websites.  Advice please!

    Check System Preferences > Flash Player > Advanced
    Click:  Delete All under Browsing Data and Settings
    Then empty the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show develop menu in menu bar
    Now click Develop > Empty Caches
    Quit and relaunch Safari then try Flash on a website for sound.

  • Suddenly I cant get sound on the music I have purchased on Apple TV. Movies

    Suddenly I cant get sound on the Music I have purchased on Apple TV. Movies and TV Shows sound is ok

    Welcome to the Apple Community Ree Ree
    Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
    If you are using a sound system/receiver, make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
    Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

  • My Mavericks upgrade crashed my hard drive and I had to reinstall Mountain Lion.  Now I cannot get any of the apps that I purchased to download.  The icons on the launchpad just say "waiting" no matter what I try.

    My Mavericks upgrade crashed my hard drive and I had to reinstall Mountain Lion.  Now I cannot get any of the apps that I purchased to download.  The icons on the launchpad just say "waiting" no matter what I try.  My app store ID is fine.  What do I do?

    Are you now using a different username from the one you used prior to migrating? If so that is the reason for the problem. You might, then, give this a try:
    To fix Home folder permissions
    Open the Terminal application in the Utilities folder.  At the command line prompt enter or paste the following command line:
    sudo chown -R `id -un`:`id -gn` ~
    Press RETURN.  You will be prompted to enter your admin password which will not be echoed.

  • I cannot get any of the zoom functions to work, period. When Firefox starts up it begins to display the page then it stops and redisplays it. So its like it flashes on for a second then completely regoes to the site, any site. The text zooms dont work eve

    I cannot get any of the zoom functions to work, period. When Firefox starts up it begins to display the page then it stops and redisplays it. So its like it flashes on for a second then completely regoes to the site, any site. The text zooms dont work even when i try to change the font on the content tab, nothing. I have reinstalled firefox still no luck help,!!!!!
    == This happened ==
    Every time Firefox opened
    == this month ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.2)

    Do you have that problem when running in the Firefox SafeMode?
    [http://support.mozilla.com/en-US/kb/Safe+Mode]
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this:
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • I dropped my iPhone 4S and when I went to pick it up, the screen was black how do I fix it or where can I take it to get fixed in Adelaide South Australia?

    I dropped my iPhone 4S and when I went to pick it up, the screen was black how do I fix it or where can I take it to get fixed in Adelaide South Australia?

    Look under service
    https://locate.apple.com/au/en/
    https://locate.apple.com/au/en/service/?pt=1&lat=-34.92862119999999&lon=138.5999 594

  • My wifi has changed and the backup reminder has come on but I can't get it to go away and I can't log on to the new wifi. How do I fix this?

    My wifi has changed and the backup reminder has come on but I can't get it to go away and I can't log on to the new wifi. How do I fix this?

    Hello Nicolettep,
    It sounds like you are getting prompted to back up your device but you are unable to join your updated Wi-Fi setup. I recommend the troubleshooting from this article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Tap Settings > Wi-Fi and turn Wi-Fi off and on
    Restart your iOS device.
    Unable to connect to a Wi-Fi network
    Verify that you're attempting to connect to your desired Wi-Fi network.
    Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all.

    When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all. Any help is greatly appreciated.

    Hey Grupo Castillo,
    Thanks for the question. You can actually configure this behavior from Mail preferences:
    1. Choose Preferences from the Mail menu.
    2. Click Composing.
    3. Deselect the checkbox for "When sending to a group, show all member addresses".
    When you send an email to the group, only the groups name will be seen.
    Mac OS X: Mail - How to Hide Address Book Group Member Names When Sending an Email
    http://support.apple.com/kb/TA21082
    Thanks,
    Matt M.

  • I have an iMac4.1 and my iPhoto is very slow and the thumbnails correspond to the wrong pictures.  How do I fix this? Or is my iMac too old?  Will getting a new iMac solve this problem?.

    I have an iMac4.1 and my iPhoto is very slow and the thumbnails correspond to the wrong pictures.  How do I fix this? Or is my iMac too old?  Will getting a new iMac solve this problem? 
    I realize is only 512MB of memory but I want to make sure that a new iMac will solve this problem.  Can the new iPhoto handle 10GB or more of photos?  Or do I have to go to Picasa anyways in which case I can buy any computer to do that?

    The model of Mac is not partcularly relevant, it's the version of the OS and iPhoto that matter.
    iPhoto - since 2006 - is good for 250,000 images.
    Regards
    TD

  • I cannot get any access to websites from my iPhone 4s in Dublin and surrounds.  Why?  This is a week long problem.

    Can anyone help me with access to websites from my iPhone 4s? For the last week I have been unable to get any access to websites but can still get emails.
    I am in Dublin and surrounding parts of Ireland.  Same problem everywhere even where access is usually very good.
    What is going on?

    Dear allan
    Thank you so much for your replying
    Please tell me what do you mean with
    (or send the unlock request to Apple on the owner's behalf. The unlocking is done with a restore with iTunes.)
    And how i can do it????
    If there is a link to this please write it to me
    And it will be highly appreciated
    Thanks again
    But please help me urgently

  • I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

    I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

    Reinstall OS X:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Maybe you are looking for

  • Different Item Category and  single invoice.

    Hi Experts, A customer has 2 materials one is third party mat(TAS),Second one is normal mat(TAN)..These both items entered in one sales order and his requirement is he wanted in single invoice with out splitting? How can we do this? Is it possible th

  • Timer fires during trigger processing on web

    I was looking for a way to augment the default behaviour of a hierarchical tree. The trouble is clicking in a tree can fire various combinations of WHEN-MOUSE-CLICK, WHEN-TREE-NODE-SELECTED, WHEN-TREE-NODE-EXPANDED, WHEN-TREE-NODE-ACTIVATED, WHEN-MOU

  • Single Code Page Unicode conversion when source and target are the same

    Hi everyone.  We have recently upgraded our non-unicode 4.7 to ECC6 non-unicode.  Now we have begun researching the next step to convert to Unicode.  I know we could have done the Combined Upgrade and Unicode Conversion but I wanted to do thorough te

  • Unique title for MY_GREAT_DVD burned with Disk Utility

    composed movie in Final Cut Express 4.0.1->sent to IMovie 09 for chapters->to IDVD 09->to Disk Utility for. img file before burning DVD. [BTW, had some "multiplex errors" until I took periods (decimal points) out of chapter marker titles]. Problem is

  • ADJUST COLOR mixer?

    Hi, forgive me if I'm a bit behind the times, but my last Photoshop software before Elements 9 was CS2. Where has the manual "Adjust Color" option gone? I fine it hard to believe the program would be without a simple RGB adjustment tool, even in a li