I suddenly don't have an IP address and can't connect to the Internet!
A friend came over about a week ago and started playing with my MacBook pro. For most of the week I kept dropping the wifi signal. Then yesterday it wouldn't connect anymore. I tried restarting it several times, and renewing the DHCP lease, and removing all the remembered networks. Tried running the assistant and diagnostics, with no help. It says I don't have an IP address and that's why I can't connect. Any help?
Morning Serahhaggerty,
For more information on this, take a look at this article:
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
http://support.apple.com/kb/HT1714?viewlocale=en_US
For troubleshooting on this, take a look at this article:
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/TS1317
Hope this helps,
Mario
Similar Messages
-
I have full bars but i can't connect to the internet. I've done all the usuall thing like reset the ipad reset my internet security but everytime it says "safari cannot open the page because it is not connected to the internet" Any ideas?
As with previous posts this is usually a DHCP issue and occurs frequently especially with routers connected to Cable Modems or those Micro-Cell towers.
Unplug all Routers, AirPorts (or other off brand Wi-Fi broadcast units) and any other Wireless broadcast unit that might provide you with a WDS (often other AirPorts feeding off the signal of the AirPort closest to Cable/DSL Modem) and best to totally power down the Unit affected; lastly either hold a reset button on Cable/DSL modem for 30-45 seconds or actually power it down if an option (not suppose to power down Cable Modems that have Telephony for some odd never completely explained to me reason).
Let Cable/DSL Modem re-boot till 'all green lights'. Then power up each device involved in order from closest to farthest waiting each time for completion of initiation. Micro-cell towers can take 10 minutes to completely re-boot and you must wait for across the board green lights in my experience. Even WDS can add a few minutes till all green on mother AirPort unit.
Only NOW may you re-start the offending device and see if it will connect. Works about 99% of the time! -
A message saying "ethernet has a self assigned IP address and will not connect to the internet" comes up whenever I plug the cable in. Everyone's computers work except for mine work in the house and I have tried different cords and connecting sites.
Please helpOpen System Preferences/Network
Select the Location you use at home
You may need to click the Padlock bottom left at this point if it's locked, enter the admin password to unlock
In the left hand column drag the Ethernet connection to the top of the list and remove any you don't use
Click the Advanced button bottom right
Click the TCP/IP Tab
Set Configure IPv4 to Using DHCP
Click OK bottom right and you should see the Router IP number appear and a unique but similar one for your Mac
Click Ok then click Apply and close the Panel -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
When trying to find my ipod i get the message offfline. However I have it with me and it is connected to the internet and the find my iphone is on. Any suggestions?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
My mac air OSX10.8.5 won't connect to the internet. It says it has a 'self assigned IP address and therefore cannot connect to the internet'. Network diagnostics is unable to the solve the problem. It happened suddenly for no reason and now I cannot connect except by typing in the configuration settings manually. Please help me!
Use the Airport Utility or log into your wireless device via http and ensure the DHCP/NAT service is enabled. If accessing via HTTP, you will need to manually set an ip within your local subnet (eg: 192.168.0.x).
-
i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.
Try changing the channel in use in case you're getting interference.
If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
mrtotes -
I have windows on my mac which was installed at the apple store. I have lost audio and cannot connect to the internet on the windows side. Mac is ok. apple genius and tech support can't help me and say I need to go to microsoft. In fact the tech support was unaware that windows was loaded on by the apple retail store. Has anyone else had this problem?I recently bought fusion thinking this would help bridge between the two( as told by the genius bar) but it didn't help.Any ideas?
hey mate i used to have the same problem and i got computers maintenance guys out to fix it in the end and all it was, was the router.. got a new one and it was all good after that! i think some routers just arent compatible for some reason or another.
-
I am getting two error messages as I attempt to login on my iMac. One says I don't have an IP address and another says that another device is using my IP address and won't allow me to login. Any advice?
Is your AirPort Extreme Base Station (AEBS) the only router in your network configuration? That is, is it connected directly (by Ethernet) to an Internet Broadband modem OR to another router upstream of it? Regardless, what it the make & model of the device that it is connected to in order for it to gain Internet access?
-
I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
we have a movie downloaded on a laptop connected to the internet pluged into our router in the basement and an apple tv upstairs trying to play the movie through home sharing but it wont play. can anyone tell me whats wrong? it comes to the last loading page where it shows the desscription of the movie befor it acually plays.
It can come about without any change done by the user, and it's not just from other networks. The placement of the router can also affect performance. Also make sure router is up to date.
Apart from that would be the reboots. -
I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?
IP routing doesn't work the way many folks might initially think it does; functional IP routing requires manual configuration and the establishment of static routes and default routes specific to the local network configurations, and it's very easy to get it wrong, or to get the default route swapped. Multiple NIC boxes don't magically work, either. (Been there, done that, wondered what happened to my network when the paths got reordered or my route settings were messed up, etc.)
Routing configuration errors can be quite subtle, too. (Again, voice of experience. Ever had a thousand-seat office LAN accidentally routing through your desktop? As the, um, unnamed guilty party discovered, getting into that configuration was subtle. Seeing the performance crater on the fellow's box and on the LAN was obvious.)
Knowing how IP routing works is a prerequisite to getting this configuration to work; there's manual configuration required. Clearly something has gone weird here.
What to do? Read up on IP routing. I'll again suggest the threads and the manual mentioned earlier.
And in general, I prefer to avoid using my comparatively expensive Mac boxes as sub-optimal IP routers or as firewall boxes. General-purpose operating systems and generic x86 boxes are going to be inherently poor IP routers. Dedicated routers (or embedded or surplus x86 boxes with routing software loaded) offload the Mac boxes here, and are also typically easier to configure manage. And "real" IP routers can have hardware specific to efficiently routing packets. Use of an outboard firewall or firewall-router box also greatly simplifies gateway routing, too; it's a configuration that many folks and many businesses tend to use. -
Cant' get my AirPort to sync up with internet. I get the message "AirPort has the self addressed IP address 169.254.231.99 and will not connect to the internet. How do I fix? Thanks.
What broadband router do you have?
What model Time Capsule do you have?
If you changed the system over from another router.. have you rebooted the entire network.. particularly a cable modem.. did you power off for at least 20min..
Tell us some info and we can help. -
how do you purchase a ringtone? i have enabled 'ringtones' in the 'general' section of itunes preferences and i am connected to the internet but i just cant see where in the itunes store to click once i am at the song i want to turn into a ringtone. help!
You don't
You have to create a ringtones. Google will find several ways to do this.
I use Garageband.
How to create custom ringtones in GarageBand 4.1.1
You can also use itunes:
Make free iPhone ringtones in iTunes 10 -
Hello, I have an Iphone 3GS and can't connect to Game Center. It recognizes my apple ID account, states it was never used with Game Center. Then asks for country, birthdate, then returns to ask country again, then birthdate, and returns to the loop. Never ends the loop unless I cancel the setup process. I have restored the iphone to the factory settings and restored the backup, but did not work. Any suggestions on what can be the problem? thank you.
I just read another post that says you can go into a game that allows for multiple players and utalizes game center and enter your account information that way. I haven't tried it yet, but it seems to work for others that had this issue.
Maybe you are looking for
-
Video Pro application missing from my 808 even aft...
Hi, Well the title says it all. I saw everywhere on the net that the 808 PureView was to get the Video Pro app after the FP2 update, but even after the update to FP2 my 808 still doesn't have that application. And it doesn't show up in the update app
-
My Iphone 4s turned of, and now it won't restart. I've tried holding the home and power-button down together for a long time. Nothing works. It just vibrating every fifth second. When it is vibrating, it appears on Itunes, but it won't restore. It sa
-
What file do I use to upgrade WRT54GL firmware?
Just got a new WRT54GL wirless router and am interested in how to upgrade the firmware. Downloaded WRT54GL_v4.30.9_US.tgz from the Linsys support/download website. It's a zip file that contains WRT54GL_v4.30.9_US.tar which is another zip file that co
-
Merge to HDR Pro not saving.
I've been using PS for the past few years now, and moved onto CS5 last year. I recently decided to try out HDR photography after realising that there was an automerge. CS5 runs fine on my laptop (Windows Vista, 32 Bit) but when I use Merge to HDR Pro
-
Which Operating system most company use to run oracle?
Which Operating system most company use to run oracle? thanks