I suddenly lost all my access to my songs. I have them on an external drive. How do I get iTunes to recognize my external drive as my library source like it always has been?
I was using my iTunes Library and it is now gone. I have my songs stored on an external drive. I checked the connections and they seem OK. I can't get the iTunes screen to show the sync button nor find my library. Does anyone have a suggestion?
Was the media solely on the external library? If so, it is likely that iTunes was started at some point with the external drive unaccessible. Simply point iTunes to the correct library location. To do this, close iTunes. Hold <SHIFT> and launch iTunes. When prompted to find library or create a new one, select the find option and point iTunes to where the iTuneslibrary.itl file is at on your computer (or external drive).
Similar Messages
-
my laptop had to be reset to factory settings. prior to that i had all my itunes songs stored on a portable drive. how do i get itunes to recognize the drive as its library?
If the library file is on the external drive, hold <SHIFT> while launching iTunes. When it prompts to select a library file or create a new one, point it to the location of the library file.
If the library file was on the internal harddrive, easiest solution is to restore it from the backup. If no backup exists, use File > Add Folder to library. Also under Edit > Preferences > Advanced, change the library location unless you want iTunes to move the media to the internal drive. -
I had to re-format my laptop and lost all of the songs in my I tunes but have them all still on my I pod can I transfer my sogns from the I pod to I tunes?
CD's can only be played on PC's or Mac's (obviously). If they contained music in them, they will have to be downloaded over again. What is best to do for further problems ike this is to put those songs on a big external hard drive at about 500GB for $60. They work very well and they are time saving. Putting in multiple CD's into one big hard drive will work well. Unless you have the songs on your computer with another music player like Windows Media Player for Windows XP - 7, you do not have to do all those CD downloads. If you have them on your computer do this: File>> Add File to iTunes the drag a big box around most of the music songs and they will be uploaded.
Wait for tomarrow for further replies by me.
Also, iTunes will only allow you to transfer PURCHASES to it. Follow this advice^^^^^^^^^^^^^^^....!!!!!! -
I have Windows XP and downloaded Firefox 4.0.1. After it was installed 5/7/11, I noticed all my Yahoo search bar apps were missing. Rebooting did not help. Neither did the "gear" on the toolbar next to the yellow Yahoo search box. Internet Explorer browser still shows them. How can I get the apps back in Firefox?
I have Windows 7, the Yahoo toolbar has been working fine until today now all my apps are missing.
Refreshing the toolbar does nothing. -
I lost all of my information updating to iOS 6 on my IPhone 4. How do I get it back?
I lost all of my information updating to iOS 6 on my IPhone 4. How do I get it back?
As Lawrence Finch suggests you can recover more recent information if you have a more recent iCloud backup.
To avoid this problem in the future you should check the iTunes settings when your phone is connected. Make sure iTunes is not set to sync automatically when your iPhone is connected. Another step to take is to give your new iPhone a unique name that is different from your old iPhone. Finally, the best way to charge an iPhone is to use the charger that came with the iPhone and plug that into a good wall outlet. -
I lost all the icons at the bottom of individual emails on my iPhone. How do I get them back???
Open the mail app then press and hold the sleep/wake button until the red slide to power off thing appears. Without sliding the bar, press and hold the home button until the app quits.
Also clear the mail app from multitasking bar too. Then open mail app and check again -
I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?
If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library -
My old windows computer crashed and I had to buy another one. I rescued my itunes file off of the old one and installed it on the new desktop. How do I get itunes to recognize it so that I can get all my old music (mostly burned CD's) to be recognized
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
How do you get Itunes to recognize all the music in your library when you buy the backup in the cloud? Alot of my music was not backed up. These are songs I burned off my CD collection. Itunes Match did not recognize them either?
*What am I doing wrong?*
You moved it to the server.
You should let iTunes do it.
Point iTunes prefs to the new location.
Menu Advanced -> Consolidate library. -
I copied all songs to an extern HD. how do i get itunes to find them there?
hello! i have a big problem. my local HD is full of mp3s. so my system isn't working very well. so i copied all songs to an extern HD. But when i delete the songs from the local HD itunes doesn't find them anymore. so how do i get itunes to take the songs from the extern and no longer from the local HD?
please help me!This article in the Apple Knowledge Base describes how to move your iTunes Library to a different location.
The best thing to do ... if possible ... would be to go back to your original set-up and then follow those instructions. It's success will depend on whether you still have the original iTunes Library files .
If that's not possible, you can follow the instructions in the Add to Library section of this KB article . iTunes will recognize the files on your external drive but will not maintain any of your playlists or related information. -
How does one get an iPod nano to turn on other than the "normal" way? This one has been dropped and all I can get is a blank screen. I have tried holding down the HOME button to restart it but no go. When I connect it to my computer, I am told to enter the PASSCODE which I cannot do as there is no touchpad.
David ..
Your topic refers to an iPod touch
Then you say: How does one get an iPod nano to turn on ......
If it's an iPod touch, try a reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, whether it's an iPod nano or touch, it probably needs service > Apple - Support - Service Answer Center -
Hello,
Ive been using sync on both my laptop and desktop in windows 7 and linux mint. Its been working great cross platform, but I recently formatted my drives and reinstalled everything. I obviously didn't save the Firefox passwords because I trusted the sync server to have it all. After a fresh OS install, I installed the latest ver of Firefox, logged in to my sync account and selected the default option for sync (both ways) knowing that the server has all my data and will download it onto my newly installed Firefox.
Unfortunately the server doesn't seem to have my data anymore as it didn't download any passwords I had saved and sync since before the full format/installation process.
How do I get it back now? Does the server has a roll back function?
Thank you
OviThank you again for your kind and prompt reply. I really appreciate it. I think the fact that I am transferring stuff from my old desktop PC to a new laptop has saved me. I copied all the apps from iTunes on the old desktop to a flashdrive, then added those apps (via Explorer!) into iTunes Media. Then I synched the phone. I have got all but 45 apps back, including the data!!! How awesome is that! It's 9.50 pm here in Australia and I have been sat in front of all this technology for about 15 hours now, so I'm giving up for the night. Perhaps tomorrow, somehow the lost 45 apps will magically appear. I haven't quite worked out which ones I'm missing as I'm so tired.
I want to thank you most sincerely though for taking the time to reply to me. You are wonderful.
Please, Heavenly Technology God, let this all work in the morning. -
After updating my iPhone 4S with the new iOS7, I lost all my games and apps that I downloaded to my phone. How do I get them back?
Hello JeepJackie
Check out the article to download your past purchases to your iPhone.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
how can i get music i bought back that i lost from itunes when water fell on my computer ?
I'm sure if you tell them your problem, they'll let you re-download.
You can email them here. -
Hello, my old pc ran vista o.s. and the mother board died but the hard drive was good. I got a new system running windows7 and installed old hard drive to recover pictures and other data. How do I get my itunes and all my music back up and running.
See Recover your iTunes library from your iPod or iOS device.
tt2
Maybe you are looking for
-
Ok so now I right the novel. Haha. I bought my iPhone 5s and set up the AppleID for iCloud to be the same as the Apple ID I already used for iTunes and the App store. I was using @shaw.ca as part of the emaill address. I changed my ISP to save money
-
Access Sequence Field not recognized in the Account Determination
Hi All, we have created a new table for the account determination access sequence we are using as default. the new table contains the field MVGR2 (VBAP) which we added to the KOMPCV structure as ZZMVGR2. this goes fine in the sales order, however thi
-
How to Remove Decommissioned CA's from PKIVIEW Locations
Hello, I recently decommissioned two of our Enterprise Issuing Certificate Authorities from our PKI environment. I have removed the decommissioned CA http references on each of our existing CA Management Console's Extensions tabs and ensured that my
-
Hi Experts, I am facing problem with Bex Queries in Dashboards.. I am using Bex Queries in the Dashboard. When i go to Preview Mode i am getting an error "Query Result Error". In this dashboard i do have an Hierarchical Data. Please help me in solvin
-
Mac OS System Error Code Not Listed
When I tried to open up an .avi file on my hard drive with Quicktime, (after first downloading the XviD Codec) I received a pop-up that said the following: "The movie could not be opened. Mac OS error -2184" This code isn't listed on the Mac OS Syste