I-Support and Service integration

Hello,
I would like to install I-Support and Service together. However, I would like to switch on I-Support functionality little later in the project. Are there any licensing or any other issues with it?
Thanks
Vaishali Belsare

Hi,
as a short dump has been triggered check transaction ST22 in your CRM for further details about your problem... no one can "solve" this problem without any further information!
Hth,
Michael

Similar Messages

Verizon technical support and services

I don't even know where to start but first I couldn't find place to provide feedback to Verizon on thier websiet about my terrible experience.
I came home yesterday afternoon to find out that my entire verizon service was out. No TV, No internet, No phone. I called tech support and got very rude attitude guy telling me to be quiet so he can help me when I was asking him a questions. Because I didn't udnerdatnd what he was asking me to do. I'm not a technical person so I asked him to speak to me with the way I can understand then he didn' like that. He keep saying the same thing. I really think he didn't know what he was talking about. Probably he was just reading thier manual so that is the only way to say it. Anyway after we went throught everything, he told me that he'll have to send someone to my house. O.K. then when would that be? He said that Thursday. I said you kidding me. Today is Tuesday and I work from home meaning that I will not be able to work for 3 days? I asked him to speak to his supervisor then he came up with several excusees then finaly he put me on the hold for 10 minutes before I was able to speak to his supervisor. However, you guested, there were no help here. I've chceked with my neighbors and I'm the only one having this issue so it is verizon's equipment issue but because my issue is not consider as a medical emergency so I'll have to wait for 72 hours. In the mean time, we are expecting incremental weather tonight and tomorrow. So I'll be lucky if I get someone to fix my issue tomorrow after 3 days without any service. And by the way I'm paying for these days.
By the way, I got a new phone in January and there are some set up that Verizon did, I wasn't getting 4G connection until I complained that I can't send and/or receive pictures. Then I recieved my bill yesterday and found out that there are error on the bill for $250. I'm just so disappointed and frustrated about Verizon and luck of service and integrity of service personal. This is a perfect storm for me and there are noone there to help me. Every issue that I have, I had to spend mor ethan 30 minutes to talk to someone. And most of the time you'll get run around between departments. In the mean time, I really don't know what to do because I can't work. They are expectimg me to camp out at Starbacks.......
It is not fair that because Verizon can bully us around, we as small consumer has to pay for it.

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

Is anyone satisfied with Verison customer support and service?

Verizon has the worst customer support organization
I've ever dealt with in over 30 years of commercial
activity in the US and abroad.
I tried accessing support via live chat or telephone
twice. Neither works. I am not really looking for
answers, just voicing my frustration and spreading
the word.

Hi peterfarkas02 - We strive to offer you the highest level of support! I apologize for any inconvenience that may have been caused when previously reaching out. I would be more than happy to offer my assistance here and work to restore your confidence in us!
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Re: tired of this worthless support AND service

Tracing route to comcast.net [69.252.80.75]
over a maximum of 30 hops:1 2 ms 4 ms 3 ms 10.0.0.1
2 12 ms 31 ms 17 ms 50.174.98.1
3 16 ms 14 ms 21 ms te-0-7-0-11-sur03.pinole.ca.sfba.comcast.net [68
.87.196.9]
4 23 ms 16 ms 19 ms be-224-rar01.pinole.ca.sfba.comcast.net [162.151
.78.185]
5 18 ms 19 ms 19 ms be-101-ar01.santaclara.ca.sfba.comcast.net [68.8
5.154.105]
6 * * * Request timed out.
7 176 ms 176 ms 169 ms be-10919-cr01.1601milehigh.co.ibone.comcast.net
[68.86.85.154]
8 181 ms 185 ms * he-0-13-0-0-ar01.area4.il.chicago.comcast.net [6
8.86.94.126]
9 44 ms 49 ms 54 ms te-3-1-ur03-d.cmc.co.ndcwest.comcast.net [68.86.
132.46]
10 158 ms 159 ms 169 ms urlrw01.cable.comcast.com [69.252.80.75]Trace complete. THIS IS A 100% COMCAST BACKBONE HERE. I'M TIRED OF HEARING THE "it's not on our end, this is happening after the 4th jump so it's not comcast's fault anymore" excuse. IT'S YOUR FAULT. FIX IT.

jeffheftyhorn wrote:
How can I reach tech support? Link?
Jeff ~ For requesting help from Apple regarding publishing to .Mac, there's a form half-way down this page:
http://www.apple.com/support/dotmac/publishing/
iWeb's support page is here:
http://www.apple.com/support/iweb/
Apple phone support numbers are here:
http://www.apple.com/support/contact/phone_contacts.html

Tired of this worthless support AND service

Post removed due to a deliberate forum language filter circumvention violation. Please do not try to bypass the filter. thank you. Forum Guidelines (which everyone should read before making his/her first post) state Please Don't 2. Use Profanity Please keep your posts clean. Our forums have an automated profanity filter to block out inappropriate language. Please do not circumvent it by finding colorful ways to approximate or disguise those words. If you are caught trying to bypass the filters in any way, your posting privileges may be revoked.

jeffheftyhorn wrote:
How can I reach tech support? Link?
Jeff ~ For requesting help from Apple regarding publishing to .Mac, there's a form half-way down this page:
http://www.apple.com/support/dotmac/publishing/
iWeb's support page is here:
http://www.apple.com/support/iweb/
Apple phone support numbers are here:
http://www.apple.com/support/contact/phone_contacts.html

Is there a way to actually open a ticket with BB support and get an answer?

Ok, so I haven't been here long, and only a few times, yet I see a lot of posts with no actual answer, or help, or information on specific problems. I am having trouble, created a post, and there are no responses. Does BB actually have a support team, or trouble ticket process, or is this the only avenue?
Solved!
Go to Solution.

Hello.
FYI -- these forums are a user-to-user support channel, not a user-to-RIM conduit. Front line support for BB's is, by contract, not provided by RIM. The carriers and authorized resellers are responsible for front line formal support to end users. It is possible to bypass your carrier and seek assistance direct from RIM, but such involves fees since you are bypassing your support agreement with your carrier. The "Support and Services" tab toward the top of these forum pages provide information about that. But, if you do go through your carrier for support, they can escalate into RIM at no fee to you if they so choose to.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BI Publisher and Presentation services integration

Hi,
I have configured BI publisher and done the presentation services integration also. When I try to build a query by connecting to RPD, I am able to generate a query and design the report.
But when I select BI Answers as a data source, I am not listed out the reports. When I click on browse button, it opens the popup window and dispays BI Catalog and nothing else. when I check saw log, it has authentication error.
We have enabled LDAP authentication. I have used Administrator user to configure BI publisher. I have enabled the BI Publisher security type for BI Publisher authentication.
I have used the Administrator user while executing the cryptotools utility.
The following is the error.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 13024] Successful completion of init block 'LDAP Authentication' is required. (08004)
I am loogin in using administrator user and trying to use BI answers as a data source.
If anyone have any idea on this issue. Kindly help on the same.
Thanks & Regards
Rajesh J

Hi,
Yes Seriously , the documentation at this link http://docs.oracle.com/cd/E15586_01/fusionapps.1111/e20838/jdev.htm shows clearly there is a out-of-box region called "BI Publisher Region " to be integrated with ADF UI.
But after installing the extensions also I am not able to find that option.
I have installed "Oracle Fusion Applications Companion 11g (11.1.1.5.3) " updates as mentioned here "https://blogs.oracle.com/jdevextensions/entry/setting_up_a_fusion_applications"
After installing we see "BI ADF Components" in Technology Scope but If we open a jspx/jsff we don't see "BI Publisher" region option in component palette. Looks like there is something seriously missing.
One thing to note is I installed Jdev 11.1.1.5 downloaded from OTN and installed the updates from "http://edelivery.oracle.com" will that be a problem?
Any body from ORACLE ACE directors pls help us. We need this region looks like it has more options to save the document etc..
Thanks for your help!!

My Iphone4 Home button sometimes work nicely and sometimes it stop working. India Apple care says they cant give me even paid support because i bought phone from Australia. i don't know what to do. i m disappointed with the product and service support

My Iphone4 Home button sometimes work nicely and sometimes it stop working. India Apple care says they cant give me even paid support because i bought phone from Australia. i don't know what to do. i m disappointed with the product and service support

When you buy an iPhone in the U.S. it's locked to that country with the carrier you bought it for.
If you bought the device unlocked in the U.S. it's unlocked, you can use it on any carrier. Even one's outside the country.
If you want to do a repair on a device you bought in the U.S. and your using it in another country, you must send it back to the U.S. Why? That's where you bought it from.
AppleCare Protection Plans and AppleCare Limited Warranties are registered to your hardware.
Your hardware is your iPhone.
Wherever hardware that was bought then that's the country it was designed to be used in and that's where it was manufactured.
Apple is very localized - if you call U.S. tech support, you'll speak to somone in your country.
So, what does all this mean?
In order to do a repair, you need to send it back to the country you got it from.
And we're all customers like you. We understand that you're upset, but Apple isn't gonna bend the rules to one individual.
Policy is policy. Get over it.

Report service Integration (sql 2012 and SharePoint 2013) error Report Server WMI Provider error: Invalid namespace

Report Server WMI Provider Error: Invalid namespace
Domain Server, Sql2012 server and SP2013 Server (3 vm servers)
the sql server reporting services service application and applications Proxy are installed and started (SP2013 Sever)
the sql server PowerPivot system Service and SQL server Reporting Services Service are Started (in Services on Server)
in sql server 2012 sp1 reporting service configured (web service URL and Report Manager URL are configured and tested, the database report server mode is native) (SQl 2012 Server)
under general Application Settings .. trying to setup the "Reporting Service Integration" give us the above error message (Report Server WMI Provider Error: Invalid namespace)
I was looking for all blogs and TechNet material but without success.

Follow these steps:
1) Uninstall SSRS from the Database Engine server (MSSQLSERVER instance).
2) Install SSRS on the SharePoint server using the "Reporting Services - SharePoint" install option during SQL Feature selection, no other services are required (e.g. you do not need to install Database Engine services).
3) You should then see SSRS as a Service Instance in Central Admin -> Manage Services on Server, at which point you can also create an SSRS Service Application.
While this guide (http://msdn.microsoft.com/en-us/library/jj219068.aspx#bkmk_install_SSRS) walks you through it, this is for a single server install where the Database Engine is also installed on SharePoint, not something you want to do.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Service order and Logistics Integration

How to do service order and logistic integration for availability check and reservation of material

hi
are you talking about ERP CS service order or CRM service order?

OSB and SAP integration using XML web services

Hi Team,
We are designing solution for asynchronous and synchronous scenarios integration between OSB and SAP using web services.
Can you please provide some pointers which tells about how OSB and SAP integration works.
For an example:
If we are designing the above scenario between SAP PI and SAP ECC, we know the below communication protocols are avilable:
1.Proxy
2.RFC
3.IDOCs
And also we know how adapters will get connect.
Now ODB wants to connect to SAP to send and receive data. Please help me with information like:
1. Is Proxy, RFC or IDOCs are applicable for OSB as well?
2. How webservice scenarios can be implemented?
Thanks in Advance.
regards,
Vicky

Hi,
>>>and what are the Forms ? for SAP Business Connector Related Postings ??
try WM (webmethods forums) or here since this is the only middleware related forum on SDN
>>> I have a requirement to integrate sap to non-sap with Business Connector !!
excellent
>>>We need to Generate the SAP Data In xml Format ? and the Non-sap System can Understand Only XML Formated data.
fairly easy
>>>>Is there any way Business Connector Box can Pull the XML file from R/3 Application Server and store the file in the Business Connector Server. from that How do we Sent XML file to Non-sap. How do we Integrate ??
business connector has both IDOC and RFC adapters so it can
receive data from SAP (IDOC, RFC), send data to SAP (IDOC, RFC)
and pull data from SAP (RFC only)
>>>>what transaction code will trigger this event ? I mean is ther any SAP Transaction Code to Integrate Business Connector?
either transaction from SAP (for sending IDOCs for example) or you can schedule (via BC scheduler)
an RFC call to SAP that will fetch the data and put it in an XML file
good luck,
Regards,
Michal Krawczyk

[ANN] Databases, Portals, Web Services, and XML Integration Magic (Boston, July 29)

Recently added to DCI's Corporate and e-Business Portals
Conference:
Databases, Portals, Web Services, and XML Integration Magic
When: July 29, 2001, 9:00 AM - 5:00 PM
Where: Hynes Convention Center, Boston
http://www.dci.com/brochure/porbos/seminars.asp

Recently added to DCI's Corporate and e-Business Portals
Conference:
Databases, Portals, Web Services, and XML Integration Magic
When: July 29, 2001, 9:00 AM - 5:00 PM
Where: Hynes Convention Center, Boston
http://www.dci.com/brochure/porbos/seminars.asp

Integration between Finance and service management

Hi,
Does anybody know integration between Finance and Service management? If you have any documentation please send to [email protected] It is urgent!! Please help me I will reward you with points.
Thanks,
Neeli

Hello
Check this link.
http://help.sap.com/erp2005_ehp_02/helpdata/en/3c/05ce40c3e10366e10000000a1550b0/frameset.htm
Reg
*assign points if useful

I am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error

i am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
here is my listener file
lsn =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.125.128)(PORT = 1575))
#ADR_BASE_LISTENER = /u01/app/oracle
(SID_LIST_LISTENER=
(SERVICE_NAME=kull)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
tnsnames.ora
to_lsn=
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = kull )
my database name is kull
please somebody help

Biswaranjan wrote:
i have two database one is kull and another is kk
i configured listener.ora in kull
and tnsnames.ora in kk
when i am running lsnrctl start listener in database kull
This makes no sense. You don't configure a listener nor a tnsnames.ora "in a database".   I hope this is just a language issue and not reflective of a fundamental misunderstanding of how tns works.
read: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ Help! I can’t connect to my database
read: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ Help! I can’t connect to my database (part duex)
it is showing the message
Alias                     lsn
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                05-JUL-2013 19:08:06
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/product/11.2.0/db_1/log/diag/tnslsnr/server1/lsn/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1575)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1575)))
The listener supports no services
The command completed successfully
and in another database in kk when i am giving the command tnsping to_lsn
it is giving this message
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = kull)))
OK (0 msec)
but when i am cross check sqlplus system/manager@ to_lsn
it is giving the following error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor

BPEL web service and siebel integration

We are trying to deploy a web service in bpel - the web service takes xml as an input and calls a pl//sql api in a database to execute a piece of code.
We deployed the wsdl file - in siebel (creats a new business service and 2 integration objects) - and are trying to call the web service (business service) by passing an xml file from siebel (using EAI Siebel Adapter business service).
We are able to call the web service but - unable to pass the input xml -
Any help would be apprieciated.
Regards,
Siddharth

Hi Siddarth,
We are doing similar kind of POC where Siebel team will expose a WSDL at some URL and it need to be called in an ESB or BPEL. We are facing a problem in validating the provided WSDL and not able to generate XSD out of it. Can you tell me how u r able to call the webservice in an ESB(in detail) ??? Siebel and oracle fusion are at different locations.
Quick response would be appriciated.

I-Support and Service integration

Similar Messages

Maybe you are looking for