I swear I've read the FAQ and past forum posts

Hello all,
As I said above I have spent time reading the FAQ and past posts, I have found some very useful comments and have learnt a lot (for me anyhow), my problem is this.
I want to connect a soundcard to an external home cinema amp\decoder via a digital connection, either coaxial or optical is fine..
I currently have an Audigy LS but am prepared to trade this in for a better model if that?s what the majority of people think is best..
As I understand it I can pass the stereo signal through my card and digital cable into the external box for decoding into 5. for ac3\dvd movies etc.. Now this is the part where I get lost, apparently this cannot be done for games as EAX is needs to be decoded at the card for the 5. to work, if this is sent via digital I only get stereo, right?
So the big question is, how do I get both to work in 5. with the same external amp\decoder?
Thanks in advance for any help, and as I said I have looked through past posts for an answer but I don?t seam to be able to find a definiti've answer.
K

you can ONLY pass multichannel signals to a receiver if the original signal is multichannel.
basically, what's working: DVD, AC3 files, stereo streams...
what's not working: games (as the stream is computed by the card and isn't ready to be read).

Similar Messages

Already read the FAQ and searched and still have popping in my speake

System is;
AMD Athlon 64 3000
Asus A8N-SLI Premium
ATi X800XL
ATi TV Wonder Pro
SoundBlaster Audigy 2 Platinum
Maxtor 300GB SATA HD
4 Western Digital 80GB HDDs - RAID 0
.5 GB Ram
Klipsch Pro Media 5.
Developed popping/cracking on my Asus A7N8X-Deluxe MOBO. Upgraded to Asus A8N-SLI Premium MOBO along with new CPU and Vid card. Still have popping/crackling in speakers. Even have same problem using headphones. Popping/Crackling is gone when using on-board audio with either MOBO. Card is on IRQ 6 and shared with Texas Instruments OHCI compliant IEEE 394 Host Controller. Is the Audigy toast or what?

I had the same problem after an upgrade to 3.6.3.
I was using password manager for a number of web sites before. Not using cookies but password manager.
After 3.6.3 auto upgrade it did not work.
I could not enter private browsing mode.
When I looked in tools>options>security at my saved passwords the list was blank. The button in the saved passwords dialog that normally says "Show saved passwords" was actually blank (the button was there but there was no text on it).
I did have my old bookmarks and was able to create new ones but oddly the bookmark all tabs menu function wouldn't work.
I decided to reinstall firefox 3.6.3. There is no way something with that many bugs got out!
I was able to get the full firefox executable from http://mozilla.com
I closed all firefox windows and ran the installation.
After re-running the install and starting firefox everything was fine. It must have been a bad download or the original install got messed up somehow.
I hope you have the same good fortune I had!

Firefox will not start, so i read the FAQS and tried the suggestions and it still won't start and instead gives me an error message that says "unable to connect."

Firefox simply doesn't open. It's our favorite browser, so we want it back!
We get the message: "Firefox can't establish a connection to the server at www.yahoo.com.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web."
we tried un/re-installing. i tried to create a new profile, but the browser wouldn't let me. i went into my firewall settings, but nothing looked unusual. i tried restarting in "safe mode" but the same thing happened.
it looks like i'm not connected to internet, but other browsers (the awful things) work just fine.

See these threads about searchqu:
*[[/questions/816181]]
*[[/questions/790833]]

Severe Connection Problems (I've already read the FAQ)

Hello,
I have a Creative Zen 8 GB for quite some time now and I never had any problems until now. They are connection problems, but I decided to make a thread about it (after I read the FAQ and searched through the forum) as I don't know exactly what to also. Also, my excuses for any grammatical errors as English is not my first language (I'm Dutch).
As I said, I have a "Creative Zen 8 GB", version .2.0e and the total 'space' is 7672 MB, from which only 388 MB is unused.
Well, what is the exact problem When I connect my Zen to my PC (via USB port offcourse. Also, there isn't a difference between the ports in the front and back of my PC (something that was suggested in an "Help Thread" )) the ZEN Media Explorer program can find my ZEN but can't find any information on it. This means, when I click "search media" he can't find any and when I want to "change / create a playlist" I get the message Zen Media Explorer can't find my Zen.
However, I've always used Windows Media Explorer (latest version) to copy music on my Zen but also this option gives some problems. While I can select and copy music onto the Zen (or use the 'auto synchronizing' option) but I can't view the music that's on my Zen (Windows Media Explorer simply states that there "is no music on the device" ) or delete any music from it. Also, it doesn't seem to synchronize movies or images, as they don't show up on my ZEN, but do show up at the "system information" on my ZEN. This reads:
Track Count: 702 (seems correct)
Photo Count:53
Video Count 35
The last ones are incorrect (as I probably can't even put 53 videos on my ZEN).
So, to say it in short; I can only remove music on my ZEN (not via any other program) and I can't view it anywhere except on my ZEN. The problem is that I can't really manage the things on my ZEN but also I find it very strange that it notes that there are videos / photo's on my ZEN while there aren't (as I removed the ones that already stood on my ZEN when I recieved it).
I really hope that someone can help me with this problems as for the rest the ZEN is a very good player and I would like to keep it that way..
Best regards,
Jelle de Ruiter
PS: I've already tried to reset the player, but with no succes.

: Thank you for the reply,
Well, I know about this option but I saw it like 'a last hope'. So, I first tried to install the Creative Zen Software on another PC (with Windows XP, Service Pack 2) but that didn't worked out either.
However, I'll perform the Recovery today and see if it works :-)
Regards,
Jelle

I have just upgraded from Lightroom 5 standalone to Lightroom 6 standalone. I ppear to have been automatically enrolled for a 30 day free trial of Lightroom mobile and Creative Cloud. Reading the FAQ, it appears that after the expiry of the free trial I w

I have just upgraded from Lightroom 5 standalone to Lightroom 6 standalone. I appear to have been automatically enrolled for a 30 day free trial of Lightroom Mobile and Creative Cloud. Reading the FAQ, it appears that after the expiry of the free trial, if I do not sign up and pay, I will only be able to view my pictures on the desktop but not edit them - surely this cannot be true. How do I un-enroll for the 30 day free trial of Lightroom Mobile and CC?

When I was signed into Adobe (which was a requirement for installing the upgrade), Lightroom 6 told my at the top right corner that I had 30 days left of my free trial of Lightroom Mobile and Creative Cloud. In parallel with this forum posting, I am chatting with Adobe support. he is away to find out how to prevent any synching with Creative Cloud during the 30 day free trial. I do not think that Creative Cloud is an application that gets installed on your PC. I think Lightroom 6 has it built in, and can use it if if you are signed up to the Creative Cloud and Lightroom Mobile (which I am for 30 days)

I own CS 5Premium. Reading the FAQs, it seems I am eligible to upgrade to CS 6 but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month is too much for me -- I don't use this product for work. The $29 offer seems

I own CS 5 Design Premium. Reading the FAQs, it seems I am eligible to upgrade to CS 6 but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month is too much for me -- I don't use this product for work. The $29 offer seems reasonable but $49 is way too much. I don't need the majority of the programs included in CC, but subscribing to just three of them will cost way more. Really not sure what to do here :-(

Thanks Ned. I did find this page, however it isn't an upgrade. I have been purchasing Adobe products for years so that I could just pay the upgrade price for current products. With the current system, I would be paying much more than I would for an upgrade. For example, I have been using my version of CS for at least three years. The upgrade cost me $750 so that comes out to around $21 per month. I guess I have no options as far as upgrading except for paying for the overpriced CC. Oh well, time to start looking for alternatives. It was just so convenient to have the same programs at home that I use at work.

Reading the Blob and writing it to an external file in an xml tree format

Hi,
We have a table by name clarity_response_log and content of the column(Response_file) is BLOB and we have xml file or xml content in that column. Most probably the column or table may be having more than 5 records and hence we need to read the corresponding blob content and write to an external file.
CREATE TABLE CLARITY_RESPONSE_LOG
REQUEST_CODE NUMBER,
RESPONSE_FILE BLOB,
DATE_CRATED DATE NOT NULL,
CREATED_BY NUMBER NOT NULL,
UPDATED_BY NUMBER DEFAULT 1,
DATE_UPDATED VARCHAR2(20 BYTE) DEFAULT SYSDATE
)The xml content in the insert statement is very small because of some reason and cannot be made public and indeed we have a very big xml file stored in the BLOB column or Response_File column
Insert into CLARITY_RESPONSE_LOG
 (REQUEST_CODE, RESPONSE_FILE, DATE_CRATED, CREATED_BY, UPDATED_BY, DATE_UPDATED)
Values
 (5, '<?xml version="1.0" encoding="UTF-8"?><xml-response><phone-number>1212121212</tracking-number></xml-response>', TO_DATE('09/23/2010 09:01:34', 'MM/DD/YYYY HH24:MI:SS'), 1, 1, '23-SEP-10');
Insert into CLARITY_RESPONSE_LOG
 (REQUEST_CODE, RESPONSE_FILE, DATE_CRATED, CREATED_BY, UPDATED_BY, DATE_UPDATED)
Values
 (6, '<?xml version="1.0" encoding="UTF-8"?><xml-response><phone-number>1212121212</tracking-number></xml-response>', TO_DATE('09/23/2010 09:01:34', 'MM/DD/YYYY HH24:MI:SS'), 1, 1, '23-SEP-10');
Insert into CLARITY_RESPONSE_LOG
 (REQUEST_CODE, RESPONSE_FILE, DATE_CRATED, CREATED_BY, UPDATED_BY, DATE_UPDATED)
Values
 (7, '<?xml version="1.0" encoding="UTF-8"?><xml-response><phone-number>1212121212</tracking-number></xml-response>', TO_DATE('09/23/2010 09:01:34', 'MM/DD/YYYY HH24:MI:SS'), 1, 1, '23-SEP-10');
Insert into CLARITY_RESPONSE_LOG
 (REQUEST_CODE, RESPONSE_FILE, DATE_CRATED, CREATED_BY, UPDATED_BY, DATE_UPDATED)
Values
 (8, '<?xml version="1.0" encoding="UTF-8"?><xml-response><phone-number>1212121212</tracking-number></xml-response>', TO_DATE('09/23/2010 09:01:34', 'MM/DD/YYYY HH24:MI:SS'), 1, 1, '23-SEP-10');
Insert into CLARITY_RESPONSE_LOG
 (REQUEST_CODE, RESPONSE_FILE, DATE_CRATED, CREATED_BY, UPDATED_BY, DATE_UPDATED)
Values
 (9, '<?xml version="1.0" encoding="UTF-8"?><xml-response><phone-number>1212121212</tracking-number></xml-response>', TO_DATE('09/23/2010 09:01:34', 'MM/DD/YYYY HH24:MI:SS'), 1, 1, '23-SEP-10');THe corresponding proc for reading the data and writing the data to an external file goes something like this
SET serveroutput ON
DECLARE
 vstart NUMBER := 1;
 bytelen NUMBER := 32000;
 len NUMBER;
 my_vr RAW (32000);
 x NUMBER;
 l_output UTL_FILE.FILE_TYPE;
BEGIN
-- define output directory
 l_output :=
 UTL_FILE.FOPEN ('CWFSTORE_RESPONCE_XML', 'extract500.txt', 'wb', 32760);
 vstart := 1;
 bytelen := 32000;
---get the Blob locator
 FOR rec IN (SELECT response_file vblob
 FROM clarity_response_log
 WHERE TRUNC (date_crated) = TRUNC (SYSDATE - 1))
 LOOP
--get length of the blob
len := DBMS_LOB.getlength (rec.vblob);
 DBMS_OUTPUT.PUT_LINE (len);
 x := len;
---- If small enough for a single write
IF len < 32760
 THEN
 UTL_FILE.put_raw (l_output, rec.vblob);
 UTL_FILE.FFLUSH (l_output);
 ELSE
-------- write in pieces
 vstart := 1;
 WHILE vstart < len AND bytelen > 0
 LOOP
 DBMS_LOB.READ (rec.vblob, bytelen, vstart, my_vr);
 UTL_FILE.put_raw (l_output, my_vr);
 UTL_FILE.FFLUSH (l_output);
---------------- set the start position for the next cut
 vstart := vstart + bytelen;
---------- set the end position if less than 32000 bytes
 x := x - bytelen;
 IF x < 32000
 THEN
 bytelen := x;
 END IF;
 UTL_FILE.NEW_LINE (l_output);
 END LOOP;
----------------- --- UTL_FILE.NEW_LINE(l_output);
 END IF;
 END LOOP;
 UTL_FILE.FCLOSE (l_output);
END;The above code works well and all the records or xml contents are being written simultaneously adjacent to each other but we each records must be written to a new line or there must be a line gap or a blank line between any two records
the code which I get is as follow all all xml data comes on a single line
<?xml version="1.0" encoding="ISO-8859-1"?><emp><empno>7369</empno><ename>James</ename><job>Manager</job><salary>1000</salary></emp><?xml version="1.0" encoding="ISO-8859-1"?><emp><empno>7370</empno><ename>charles</ename><job>President</job><salary>500</salary></emp>But the code written to an external file has to be something like this.
<?xml version="1.0" encoding="ISO-8859-1"?>
<emp>
<empno>7369</empno>
<ename>James</ename>
<job>Manager</job>
<salary>1000</salary>
</emp>
<?xml version="1.0" encoding="ISO-8859-1"?>
<emp>
<empno>7370</empno>
<ename>charles</ename>
<job>President</job>
<salary>500</salary>
</emp>Please advice

What was wrong with the previous answers given on your other thread:
Export Blob data to text file(-29285-ORA-29285: file write error)
If there's a continuing issue, stay with the same thread, don't just ask the same question again and again, it's really Pi**es people off and causes confusion as not everyone will be familiar with what answers you've already had. You're just wasting people's time by doing that.
As already mentioned before, convert your BLOB to a CLOB and then to XMLTYPE where it can be treated as XML and written out to file in a variety of ways including the way I showed you on the other thread.
You really seem to be struggling to get the worst possible way to work.

When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?!

When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!

hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

Hi. I use Adobe Acrobat XI pro to make a PDF ebook embedded with audio. It works really well on my computer-I can read the book and hear the auto play mp3. The problem is, when I send it to my customers, they have difficulty hearing the audio. A few of th

Hi. I use Adobe Acrobat XI pro to make a PDF ebook embedded with audio. It works really well on my computer-I can read the book and hear the auto play mp3. The problem is, when I send it to my customers, they have difficulty hearing the audio. A few of them say they have Flash player on their PC and somehow they still can't hear, some say their Google Chrome browser tells them they've already got one flash player while they try to download one. For me, I had to download two versions of Flash player to be able to access to the audio. I don't know what the problem is, is it because it's the latest version of Adobe Acrobat XI pro that people with older version of Adobe reader or flash player can't open it properly? Or is it something else? How can I make sure every customer with different system can access to my books? Hope to hear from you ASAP! Thank you very much.

And how are the customers accessing the PDFs?
What devices are they using?
What program or apps with versions are they using?
I this age of other then PDF eBooks formats and reader program and apss for computers and mobile devices for these formats I would look at creating the books in one or more of the eBook formats.
Google Chrome and FireFox both have their own version of a PDF reader plug-in and they are well known to be less capable than Adobe Reader. It is possible to configure these products to use Adobe Reader.

How do I send an iMessage, a step by step answer. I have read the manual and it doesnt explain how

Can someone explain how you send an iMessage. I know how to send texts and emails but I only want to use the iMessage so that my company bill doesnt show text numbers called. I have got iMessage turned on in settings. I have read the manual and it says you can do it but it doesnt say how.

Thanks for your response. It helps a little. I now dont know how to change the send button from green to blue. What determines how the message is sent?
I know in the settings I can turn off "send as sms" so that should stop text messages being sent. I went through my contact list and selected a few people at random and noticed the send button was green for some and blue for others so I am thinking it may be either something they do to let me iMessage them or it is something I have to do in my contact list.
Do you know?

I am trying to send photos to the cloud from my phone to my iPad but they are not appearing in the stream. I have read the instructions and I think I am doing it right or am I missing a part of the process?

I am trying to send photos to the cloud from my phone to my iPad but they are not appearing in the stream. I have read the instructions and I think I am doing it right or am I missing a part of the process?

HI,
Have you done this before ? And if so, is photo stream turned on on your iphone and ipad. and as Alfred DeRose pointed out they must both on the same icloud account.
If you're new to this, you might want to do some research. Photo stream is different from camera roll and albums. Many have been on this sight looking for their photos stored in icloud after restore, etc. and they're not there. Also, after thirty days icloud deletes your photos from photo stream.
So if you're not aware, you might want to google your question. We're using the camera connection kit soon and I am learning about it. From all I've read, I'm also not the biggest icloud fan. I use dropbox. We plan to put photos taken on ipad with a camera/iphones into albums on the ipad. We'll keep all on the sd card until (and after) they can be uploaded to a computer.
An example of an article we can learn from -
http://www.macobserver.com/tmo/article/how-to-understand-and-work-with-your-iclo ud-photo-stream
Hope this helps.

Has had 2 iTunes gift cards and the scratch off strip on the back leaves us unable to read the numbers and we can not retrive anysongs without the correct numbers and letters. What can we do? Please help...

Has had 2 iTunes gift cards and the scratch off strip on the back leaves us unable to read the numbers and we can not retrive any songs without the correct numbers and letters. What can we do? Please help...

iTunes Store: Invalid, inactive, or illegible codes

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes?

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes? The Ipod Touch, by itself does not allow cross-fading, therefore when the stop time is edited short, the song jusst truncates then goes to the next song. I tried the DJay ap and while it would crossfade, it would NOT read the song settings for the stop marker. So now I want to try and Ipad and see if there is an app that will READ the Itune stop settings within the song. I do NOT want an app that will allow me to DO the stop marker. I want an app that will READ the stop marker from the song as it is set in Itunes.

Itunes provides the option for setting the Start and Stop times of each music track. However, the start and stop times do not synchronize to the iPhone. I don't understand why this option is even available as it doesn't work when listening to music on the phone. I have not found another application that will support the start and stop time markets. I have searched quite a bit for this but can't find anything. I hope we can find something.

How do I get the 1121 card to read the switch and make it a 1 or 0 to count pulses?

Hello,
I am developing a test stand to test tires. We have LabView 7.1 and the SCXI chassis with an 1121 transducer card. I am trying to count the rate and total number of revolutions made by the tire. The signal is acquired from a 12V-proximity switch that is actuated once per RPM. The tire turns at 1,000 RPM or a little more.
The signal will have to go through a 100-foot cable to get to the LabView chassis, will this be a problem?
How do I get the 1121 card to read the switch and make it a 1 or 0 to count pulses?
Will LabView be able to read this many pulses per second?
How do I get MPH and a RPM reading out of it?
Thank you,
James Happe

Hi James,
Since you are cabling your DAQ board to an SCXI chassis with an 1121, you will not be able to use your counters without additional hardware.
The 1121 is an analog input signal conditioning module. It performs filtering and attenuation to help measure analog signals. What it does not have is access to your board's counter pins.
In order to use your counter pins you will need to get the necessary hardware. You have two options:
1) Buy and SCB-68. This is a breakout box that will cable directly to your DAQ board replacing your SCXI chassis. You can connect your signals directly to your counter with this. However, I would advise against this because your application has a 12 volt signal. This will overload the 5v maximum voltage for your counter pins.
2) Buy a 1180 feedthrough panel. This will allow you to use all of your DAQ board's functions with the SCXI chassis. Withouth the 1180 feedthrough panel, the SCXI-1121 is the only thing connected to your DAQ board. Since the 1121 only performs conditioning on the analog inputs, that is all you can access. The other pins cannot be used (no access). With the 1180 feedthrough panel, you can put a connector block on and access all of your other pins (including the counter pins). Again, I would advise against this since your 12 volt signal will overload your counter pins.
My suggestion would be to perform an analog input task. Set up your 1121 in MAX and use a LabVIEW shipping example. In the shipping example select an analog input channel from your SCXI-1121 module. Set the appropriate voltage range and take some measurements. Once your signal is connected and you can read it using an analog input example you are half way there.
Take the analog input shipping example and modify it to perform frequency analysis on the voltage readings. You can simply wire the data from the DAQmxRead VI into one of the frequency analysis VI's (noted in my first post). The output if that VI will give you the frequency of your signal.
-Sal

I swear I've read the FAQ and past forum posts

Similar Messages

Maybe you are looking for