I swtiched from LabView7 to LabView8.2, and now my parallel port on LPT1 is not more recognised (I am not able to use VISA to write on it). Why?
I switched from LabView7 to LabView8.2, and now my parallel port on LPT1 is not more recognised (I am not able to use VISA to write on it). Why?
Hi,
Sorry for the delay,
I need to know more informations about your problem. Have you check the configuration of LPT in MAX? Can you open a VISA session? Do you receive a timeout error when you try to write on that port?
You can find same importants informations about parallel port configuration for different versions of LabVIEW at this link:
http://digital.ni.com/public.nsf/websearch/E6415E8A8376F63D86256C46007592E8?OpenDocument
Let's me know.
Riccardo
Similar Messages
-
I just update my Mac operating system from Snow Leopard to Yosemite and now have to upgrade my Epson Printer WF3540 so that it will be able to scan. Will Adobe be compatible with these softwares?
Hi spiritentrep,
What Adobe software are you referring to? Are you using Acrobat? You should have no problems running Acrobat XI on Yosemite, and as along as you have compatible scanner drivers for your Epson, you should be fine there as well.
Best,
Sara -
Last week I upgraded to ios 6.1 and now wifi is hardcoded 'off' I am not able to set it as on
I upgraded to ios 6.1 and now wifi is hardcoded 'off' I am not able to set it as on
Does any body have solution to above problem.......This is iCloud forum. For iPhone issue go to the Using iPhone forum
Anyway try this
IOS: Wi-Fi or Bluetooth settings greyed out or dim.
http://support.apple.com/kb/TS1559 -
I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?
You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page. -
I rented a movie from itunes on my ipad and now want to play it on my appletv, but cannot get it to show up. What do I need to do?
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer."
http://support.apple.com/kb/ht1657 -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
I just recently tried to update my ipad from ios 4 to 5 and now I am getting an error message when I try to connect it to the computer so that I can download all of my apps, etc. please help! Error message says iTunes could not connect to this iPad. An unknown error occurred (oxE8000000A).
Help!Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.apple.com/nz/itunes/download) -
Hey yall.. I lost everything from my mac from a data encrypted error and now it won't let me download Lightroom off of the disk again onto my new mac. What should I do?
Hi Brennacoyle,
Can you please share the error message that you are getting while trying to download on the new MAC ?
Cheers,
Kartikay Sharma -
I accidentally deleted documents from Pages on my iphone - and now they won't show up on my mac anymore either. I must have saved them just on icloud and not on my mac, too. is there anyway to recover these documents?
On a mac, when you save docs to icloud, a local copy is also saved. It's saved at:
~/Library/Mobile Documents
Note that Library in the user's home folder is now hidden, so you'll have to set Finder to view hidden files.
The Mobile Documents folder has subfolder where copies of the doc/data files are stored.
If the file(s) are no longer there, then use your Time Machine backups to get copies back to the mac. -
I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.
Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti.... -
My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?
It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe. Do not attempt to use the phone, but take it to Apple for evaluation.
-
I bought a used iphone from a friend and I am not able to use it in Ethiopia. It is carrier blocked. Can you please help how could I unlock my iphone 4?.
Unlikely as you do not meet there requirements for unlocking.
Have your friend the provided the phone contact them. Based on your statements I am concluding he was or still is an AT&T customer, that is one of the requirements of getting the device unlocked. -
I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management. Any ideas how I can get access to these now?
Hi Blotontheland,
Thanks for the prompt reply. The interesting thing is that my Macbook Pro was upgraded today to Yosemite and I still have the spinning wheel on the start up screen before the login page comes up. -
Just days ago, I downloaded and created folders for 2 batches of photos I downloaded from my camera to iphotos but now both are missing. They were not deleted and even if they were, were not found in my trashcan. I have looked through every folder and they are not there. Is there a bug that can get into iPhoto to do this? Is there a program Apple offers to retrieve lost photos? Thank you.
debbie5891 wrote: ... They were not deleted and even if they were, were not found in my trashcan...
How do you know they were not deleted? Is it possible that they were moved to the trash and the trash has been emptied, if not by you, perhaps by someone else?
In the best case, you mean they were not deleted from your camera. If so, it will be simple to merely download again from your camera after you have corrected any problem with your Mac or workflow.
If you have a way to be certain that your two folders were not deleted from your Mac, follow the directions provided by your Mac's Disk Utility to repair your Disk (not Disk Permissions.) On more than one occasion, disk repair has restored the visibility of missing folders I knew I had not deleted. If you have trouble with the process, post back which specific Mac OS version ( > About This Mac) you are using so we can offer specific help.
It is also possible that the missing folders might be saved somewhere you do not expect them to be.
It is also possible that they may merely be invisible and, thus, not showing in your Finder windows even after performing a Disk Repair.
Here are some more ideas you can consider:
Restart Mac and then look where you expect the folders to be. They may be visible there now.
If not, try a Spotlight search for the folder name(s) you used. Spotlight may give you a list of places to look. If you don't remember the folder name(s), try a search for the file type your camera uses for saved images. My cameras save "jpg" files, but yours may save other image file types.
You can also open a finder window and use the window's search oval to search. The method allows you to use the search "+" button to add invisible items via the "File Visibility" choice.
debbie5891 wrote:... I have looked through every folder and they are not there....
If you are using any version of Mac OS X, I doubt this statement can be true.
If you select your disk volume name (not the Media item) in the sidebar of your Mac's Disk Utility, you will see that the number of Folders and files on your disk is very large. For example,I keep my startup disk small and write most of my files to other disks. Even so, my startup disk contains more than 195,000 folders.
If you mean you used some software to search each folder, please post back the name of the app you are using.
debbie5891 wrote: ... Is there a bug that can get into iPhoto to do this? ...
I have not had the problem you describe, nor have I heard of such an iPhoto Bug.
I have used every version of iPhoto I have seen including the current new version: iPhoto '11 version 9.5 (902.7). You can find the version you are using by executing the iPhoto > About iPhoto menu command and post it back here.
debbie5891 wrote:... Is there a program Apple offers to retrieve lost photos? ...
I am not aware of any Apple apps that work specifically on photo files. If you know the pathname to the lost files, and if you are comfortable with Unix commands, you might be able to use your Mac's Terminal utility to retrieve at least some of your images. However, it will be MUCH simpler to merely download another copy from your camera.
You can search the Mac App Store for "unerase" to find several apps that can unerase files, including deleted photo files, in certain circumstances even after the trash has been emptied. To determine whether one or more of them may meet your needs, see their product info and reviews for specifics about each one.
debbie5891 wrote:...Thank you.
You're most welcome.
If you need to post back for more information, please provide specifics on your Mac OS, iPhoto version, which of the suggestions offered here you have tried, and any details not already provided about the problem status.
Message was edited by: EZ Jim
Mac OSX 10.9 -
Flash accidentally got uninstalled from my pc laptop (Chrome), and now it won't even load websites so I can't download it. Can I copy it from my desktop? Or how do I get it back onto my laptop?
Hi micha164,
I am curious to know how did Flash Player get uninstalled from Chrome? If you can please share steps to reproduce how your Flash Plugin got Removed?
Also, Can you open chrome application Goto Chrome://plugins and See if Adobe Flash Player Plugin is Disabled? If yes, kindly enable Flash Player Plugin by clicking the [blue colored]enable link and restart the browser to see if the changes have reflected.
Because Flash Player cannot be uninstalled from Chrome using any uninstaller, as it is embedded part of the app installer/update and can only be removed if you remove the plugin reference from the location on disk. Possibility is that your plugin got disabled and did not get enabled after that.
Please see if it helps. If the above does not work then the only resolve is to update Chrome app. Please let us know if your query got resolved or not.
Piyush
Maybe you are looking for
-
My BB Playbook doesn't charge and turn on. Nothing can solve this problem. Please help!!!!
Hi everybody! My BB playbook doesn't charge and turn on. When I tried to charge it, at first ,the red color appears for 10 seconds and after the green color starts blinking several times. And that's all. Every time when I am charging it the same t
-
Report value pass to another Report
From my 1st report I am doing CASE LV_UCOMM. WHEN '&IC1'. READ TABLE DISP INDEX SELFIELD-TABINDEX. CASE SELFIELD-FIELDNAME. WHEN 'TXZ01'. WA_PARAMS-SELNAME = 'TK_MATNR'. WA_PARAMS-KIND = 'S'. WA_PARAMS-SIGN =
-
How can I delete permanently a old Apple id? my devises keep defaulting to my old id.
problem: I originally had a Apple ID that used a different email address. I had to delete that email address as it was not accessable anymore. I created a second Apple ID. But my iphone keeps defaulting and asking me for the password for my first
-
Resetting a for loop counter and restarting the computation
I have a while loop nested inside a for loop to do a calculation of a model. Lets say I am on the for loop counter 4. Suppose I wanted to keep track of the number of iterations on one the while loop, and if it exceeded a certain number say 100, exit
-
Hi All, I have created a SC PO, issued componenets to SC vendor (541), howerver while creating GR for final product, i am getting an error for components (543) "Material xyz do not have enough stock " , but it is there in vendor stock. Thanks in adva