I synched my iPad to my movies library but the movies aren't showing on my ipad

I synched my iPad to my movies library but after I disconnected it the movies aren't there

Are you looking in the videos app?
Did you actually select the movies to sync in iTunes?
Connect the iPad to the Computer and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the MoviesTab on the right.
Click on all of the movies that you want to transfer to the iPad.
Click on the Sync Movies Heading.
Click on Apply in the lower right corner of iTunes

Similar Messages

I bought some songs on my iphone but the song aren't showing up in my music library. I plugged in my iphone to a computer and the songs showed up on the computer but still aren't on my phone.

The songs show up on itunes as bought, on the itunes app they are under the more ---> purchased but not downloaded. So i download them and they still don't showing up in my phones library.

Thanks Stephen! I did indeed miss the "Update iTunes Match". I got my hopes up that this would fix it, but alas, no luck. I clicked that on my computer, and it said it was doing a bunch of updates, looked like it was uploading my new setup to the cloud. I then opened up my music on my phone and sadly, nothing had changed. All my old playlists were still there and none of the new ones. I even went into the settings and turned off Match, then turned it back on; went back into my Music and all my playlists were gone and it started downloading them again (thankfully just the lists, not the music, so it didn't take long). But again, it just brought up the old lists and not the new ones.
Any other ideas?
Anyone?

In imovie11 the finished film shows up in the events library but the project file is missing. Any way to reconstruct it from the finished film?

in imovie11 the finished film shows up in the events library but the project file is missing. A complete search of hard drive fails to find it. Any way to reconstruct the project file from the finished film? I need to re-edit the movie.

Thanks for the info. I do have the Aperture 2 disc so I'll re-install and repair library then give it a go again. It will probably take a few days as I have a HUGE library. I'll let you know the outcome when it completes! Thanks again for the help.
Mark

I desperately to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in in library but the folder is empty. Can anybody help me?

I desperately need to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in library but this folder is empty in my library. Can anybody help me?

I looked for plugs in in my library but the folder internet plugs in is empty

I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.

I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.

Is it possible that the person who sent the message to your phone sent it to your phone # instead? Try sending a message to your phone via the email address and see if it shows up on the iPad.

HT4527 I'm transferring my iTunes library from a PC to my new iMac via home sharing. I've followed all of the steps to "import" my library but the "import" button is greyed out. Any suggestions?

I'm transferring my iTunes library from a PC to my new iMac via home sharing. I've followed all of the steps to "import" my library but the "import" button is greyed out. Any suggestions?

There is no need to import anything or use Home Sharing.
Copy the ENTIRE iTunes folder from the old computer to the new computer, everything will be exactly as it was.

I have a few hundred duplicates in my iPhoto library, but the file sizes are different. So one is 1.3mb and one is 567kb. I want to delete the smaller ones, but short of comparing each duplicate, is there a way to do this?

I have a few hundred duplicates in my iPhoto library, but the file sizes are different. So one is 1.3mb and one is 567kb. I want to delete the smaller ones, but short of comparing each duplicate, is there a way to do this? I've been looking at Duplicate Annhilator but I don't think it can do it.
Thanks!

I just ran a test with iPhoto Library Manager, Duplicate Annihilator, iPhoto Duplicate Cleaner, Duplifinder and Photodedupo. I imported a folder of 5 photos into a test library 3 times, allowing iPhoto to import duplicates. I then ran the 5 photos thru resizer to reduce their jpeg compression but all other aspects of the file the same.
None of the duplicate removal apps found set that was reduced in the file resizer. That's probably due to the fact that the file creation date was being used as a criteria and the resized photo would have a different file creation date even though the Image Capture date was the same.
They all found the 3 regular duplicates and some of them would mark two and leave the 3rd unmarked. iPhoto Duplicate Cleaner can sort the found duplicates by file size but if the file was edited to get the reduced file size it might not be found as it would have a different file creation/modification date.
iPhoto Library Manage was able to find all duplicates and mark them as such if the file names were the same the the filename option was selected. Otherwise it also missed the modified, resized version. It allowed one to select the one photo to save before going to work on the library.
So if a photo has been reduced in image quality or pixel size it will not be considered a duplicate.
OT

My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

TS3989 When I try to add photos from PhotoStream into my iPhoto Library a message appears asking to view the photo in the library (as if it were already imported). When I click View it brings me to my iPhoto library but the photo(s) are not there?

Hopefully someone can help me with my question. When I try to add photos from PhotoStream into my iPhoto Library a message appears asking to view the photo in the library (as if it were already imported). When I click View it brings me to my iPhoto library but the photo(s) are not there?

When I try to add photos from PhotoStream into my iPhoto Library a message appears asking to view the photo in the library (as if it were already imported).
How exacly are you trying to import from the Photo Stream? Dragging from the stream to the events? Ctrl-clicking or right clicking?
If "Show in Library" does not show the event, then your iPhoto Library may need repairing or rebuilding; try to run the iPhoto Library First Aid Tools, if you have not already done so. See this post by Old Toad on how to do it: Rebuild iPhoto Library Version 11:
Regards
Léonie

I m trying to import some picture from my iphoto library but element 12 don't show me the iphoto dialog box , as I can see on my classroom book and in many tutorial.any one can help please

I m trying to import some picture from my iphoto library but element 12 don't show me the iphoto dialog box ,where i choose what i want to import, as I can see on my classroom book and in many tutorial.any one can help please ? thanks

I have the same problem... but the photo library is neither on my iPhone or my Computer!! Please help.. its taking too much space.

TS4006 My iphone & ipad mini are both here w/ me at my home. But the findme app is showing my ipad mini on the other side of town, how can i get that corrected?

My iphone & ipad mini are both here w/ me at my home. But the findme app is showing my ipad mini on the other side of town, how can i get that corrected?

Hello Krazyboutgolf,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS 7: Understanding Location Services
http://support.apple.com/kb/HT5594
Improving GPS accuracy2,4
GPS accuracy varies depending on the number of visible GPS satellites. Locating all visible satellites can take several minutes, with accuracy gradually increasing over time. Use these tips to improve GPS accuracy:
Ensure the date, time, and time zone are correctly set on the device in Settings > General > Date & Time. If possible, use Set Automatically.
Important: Incorrect settings on your computer can sync to your device. Verify the date, time, and time zone on any computer that syncs with your device.
Restart your device.
Verify that you have a cellular or Wi-Fi network connection. This allows the Assisted GPS (A-GPS) on the device to locate visible GPS satellites faster, in addition to providing initial location information using the Wi-Fi or cellular networks.
Note: Microcells (sometimes called Femtocells) aren't supported with Location Services.
Maintain a clear view of the horizon in several directions. Keep in mind that walls, vehicle roofs, tall buildings, mountains, and other obstructions can block line of sight to GPS satellites. When this occurs, your device will automatically use Wi-Fi or cellular networks to determine your position until the GPS satellites are visible again.
Best of luck,
Mario

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get the right profile available?

First, the required profile needs to be present. LR 5.4 supports the X-T1 in terms of understanding its Raw format, but will not come with a profile for every lens which can be mounted onto that.
A profile is made for each specific lens, as mounted on a certain camera. It can also be used with pictures taken on a different (reasonably similar) camera body than the one originally used during profiling. This is subject to the sensor format: you can employ a given lens profile made for full frame, on an image from a crop sensor behind the same lens - but not vice versa.
Next, the image type needs to correspond to the image type which has been built into the profile: Raw, or non-Raw.
Lightroom offers only profiles of the right type for the image(s) concerned. There are many more provided for correcting camera Raw, than for correcting camera JPG. That is also the case with additional profiles, e.g. those accessed via the Adobe lens profile downloader utility.
Finally, in the event that there simply is no profile out there for a given lens, it is not particularly difficult (though a little tedious) for the end user to generate one, using a further Adobe utility which is downloadable as a package, including a range of checkerboard calibration targets, each of which needs to be printed at a stated physical size.

This VI claims to be part of a library, but the library does not claim to own this VI.

I am having a reoccurring issue with "This VI claims to be part of a library, but the library does not claim to own this VI." I can work around this by disconnecting the vi from the library and then saving it back.
However, I cannot access some vi because I don't have a password. Sub-vi's are not executable and I am thinking this is due to the issue first mentioned. For example, after relinking to a library the vi in question is now having class conflicts. I cannot modify this vi to fix it.
I believe this issue is responsible for certain functionality of my project to work for months on end and then suddenly the functionality stops working. After investigating, I find that there is an issue with some .lvlib, and using a different vi from that library will solve the issue (for example, switching from standard report to html report). I think this may be related to "This VI claims to be part of a library, but the library does not claim to own this VI."
This seems to be happening since installation of version 10.
Help!
Attachments:
linkage issue.JPG ‏82 KB
after re-link to library.JPG ‏130 KB

Hello,
What version of Labview were you using before you upgraded to Labview 2010?
Eric
Eric Liauw
AE Specialist - Automated Test | CLD | CTD
National Instruments

I want to add a CD to my IPod Classic, the CD has been loaded into my library but my iPod is not showing on i-tunes and I can't get the CD onto my iPod.

I want to add a CD to my IPod Classic, the CD has been loaded into my library but my iPod is not showing on i-tunes and I can't get the CD onto my iPod.

Well if your iPod is not appearing under Devices in iTunes when you have it plugged into a high powered USB 2.0 port, then that would explain why this newly loaded CD has not synced to it yet.
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

How can i transfer the entire itunes program (not the library,but the actual program itself) from one cpu to another? I have the older version that has the slide feature. I can't stand the new itunes.

HOW CAN I TRANSFER THE ITUNES PROGRAM ( NOT THE LIBRARIES,BUT THE ACTUALLY EXE PROGRAM ) FROM ONE CPU TO ANOTHER. I CAN'T
STAND THE NEW ITUNES. I WANT TO TRANSFER MY OLD ONE THAT STILL HAS THE SLIDER FEATURE. THANKS

Sounds like you've already installed iTunes 11 and are now trying to downgrade. To do so successfully you will also need access to a pre-upgrade copy of your library as set out below...
The main differences between iTunes 11 and earlier versions are the loss of coverflow and ability to have multiple windows open.
In Windows, you can restore much of the look & feel of iTunes 10.7 with these shortcuts:
ALT to temporarily display the menu bar
CTRL+B to show or hide the menu bar
CTRL+S to show or hide the sidebar
CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
If you don't like having different coloured background & text in the Album (Grid) view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
With iTunes 11.0.3 you can enable artwork in the Songs & List views from View > Show View Options (CTRL+J) making it more like the old Album List view.
If you still feel the need to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and supporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2

I synched my iPad to my movies library but the movies aren't showing on my ipad

Similar Messages

Maybe you are looking for