I talked with Adobe Yesterday about removing Elements from my Mac, if there were any concerns with Lightroom 5 and Photoshop CS6

The answered no, that all I needed to do with Elements was to drag it to the Trash. I did that. Now in Lightroom 5 do I not see Photoshop in the EDIT IN menu, all my plug-is are missing as well! Ive found two papers on the subject, one for both programs where they say to find the Lightroom fine "com.adobe.Lightroom5.plist" and a similar Photoshop fine in >user>Library>Preferences. Neither exist on my mac! Im in a process of a system search to make sure, but so far, no good!
I'm looking for a fix, PLEASE. To stop and delete both programs, reinstall this and ALL the plug-in's isn't something I want to contemplate if I don't have to!

Sorry Keith, I didn't look at it as a duplicate post since I initually approached it as a Photoshop issue and have since come to see it as a lightroom issue. I've subedquently found the photoshop preference file, deleted it and restarted Photoshop which recreated that file. That didn't help.
SInce my initial concern was with Photoshop I failed to notice than none of the Lightroom plug ins were showing up. Researching that fix, what I found was essentially the same as with Photishop except the Lightroom preference file. Now I'm not finding that file but I'm doing a full system search.
Some caveats to all of this are, the photoshop and Lightroom plug ins are the same. Theyre resident and run in CS6. Additionally in Lightroom if I go to preferances> external edit, I see photoshop and all the plug ins listed there.

Similar Messages

  • Is Lightroom 4 and Photoshop CS6 compatible with OS X Yosemite?

    I do not want to upgrade to Creative cloud as I only use the programs on occasion. I want to upgrade my Mac to OS X Yosemite and don't want to lose access to them.

    Please be careful
    I am an Adobe user CS5 and LR4
    I upgraded this evening and now have no CS5!!
    An Adobe agent has just told me that LR4 is NOT compatible with Yosemite!
    The same agent felt it would be a good idea for me to pay Adobe $400 to upgrade to CS6 and then I could use LR4 and PS!!!!!!!!
    I am disgusted
    RM

  • What tech specs are good for adobe lightroom 5 and photoshop cs6?

    I was planning to change my laptop to a better one as the lightroom and cs6 have been running very slowly recently. It might due to the aging of my laptop.
    I wanted to change one good one for the both programs that i mentioned above. please advise. Thank you.

    Since the RAM on the Retina model can't be upgraded by the user, I would go with the full 16GB.
    I would also look at the 512GB flash storage option - you don't want to lug around an external drive.
    Just my 2¢...
    Clinton

  • 3D issues with 2007 iMac and Photoshop CS6

    Hi,
    Prior to the 13.1 Cloud member update, the 3D engine worked on my 2007 iMac with a 128VRAM video card. With the upgrade it no longer works. Is there a way to return to the pre-update state? From internet searches I performed, the card is soldered to the motherboard, and not easily upgradeable. I know I'm not the only Photoshop user who has this issue. Illustrator's 3D engine still works. Seems like the one for Photoshop should as well. Thanks for your consideration.

    Follow up: I was able to re-install the earlier version of Photoshop CS 6 on my computer.

  • My Adobe Illustrator and Photoshop CS6 aren't opening...

    Hello, I am having issues with my Illustrator and Photoshop CS6.  Both software are encountering different issues. For Illustrator, the issue is that when the software is trying to start up, it crashes unexpectedly (it seems to get stuck on the "ColorHarmony.aip" then quits). Illustrator opens maybe 5% of the time when i sit there and try to open it, but its rare to get it to work.
    For Photoshop, it crashes 50% of the time during start up (similar to Illustrator), but the main issue with Photoshop is that when it actually opens, everything becomes incredibly slow. The mouse glitches and it takes extremely long for anything to actually work, I can't even select tools because the mouse glitches so bad. 
    inDesign however is completely fine.
    I own the Adobe Creative suite : Standard
    My computer is a HP Envy laptop with windows 8.1. It has 16b of RAM, an i7 processor and has a nvidia geforce graphics card.
    I have already un-installed and re-installed the software and even did a system restore and it didn't solve the issue.
    Please help I need this for school.
    Thanks,
    -Eric

    Moving this discussion to the Illustrator forum.
    Eric you have not posted any installation errors thus I moved this discussion to the Illustrator forum.  I would recommend you post any specific launch error or performance inconsistencies in the forum relevant to that software title.  You can find a list of available forums at https://forums.adobe.com/welcome.

  • Strange problem with removing element from node

    Hi,
    I have a problem when I removed elements from a node.
    here is the code:
    String text = "123456";
    IANode nodeA= wdContext.nodeA();
    wdContext.nodeB().invalidate();
    IBNode nodeB = wdContext.nodeB();
    for(int i=0; i<nodeA.size(); i++)
    IAElement e = nodeA.getEt_Emp_RespElementAt(i);
    if (e.getID().compareTo(text)!= 0)
         nodeB.removeElement(e);
    else
    wdComponentAPI.getMessageManager().reportSuccess(e.getID() + " was not removed");
    The node A does have a row with field "ID" equals to 123456.
    When running the application, it does write that "123456" was not removed...but it removes it....In fact my table is now empty.
    How is it possible if it didn't perform the remove operation for ID = 123456 ?
    Thanks in advance.

    David,
    Because you are iterating node in wrong direction: see my reply to your post Re: Loop problem (seems that you assigns me 2 points without reading reply, and mark it as solved just because you stop solving it
    So, in example in this thread, you must iterate node B in reverse direction, get element from B and remove it from B if it has some specific ID.
    Valery Silaev
    EPAM Systems
    http://www.NetWeaverTeam.com

  • Printing with HP B9180 and Photoshop Elements 8 and Color Management

     I've got a bit of confusion about certain settings in the printing process and I've posted a rather long discussion of my 'issues' and confusion.  I hope someone can give me some guidance here.  I've seen a lot of these issues addressed in many places but I can't seem to find an integrated response.  Thanks to anyone who takes the time to read and respond.
    Color Management Questions
    My problems started when I was getting pictures that were too dark from my HP 9180 printer after having gotten very nice prints for a long time.  I had obviously started to do something differently inadvertently.  The only thing I think that is different is that I got a new 23 inch monitor, which does produce much brighter on-screen images.  So, I started to do some research and know just enough about color management to be slightly confused and have some questions that I hope someone can give me some help with.
    Equipment Background
    I use both a Canon 20D and a Canon PowerShot SD600 camera. Both have the default color space as sRGB, although the 20D can be also set as RGB.
    I also use Photoshop Elements 8, where there are a variety of settings possible for printing.
    My monitor is an HP S2331, whose color space is sRGB and cannot be reset to RGB (I think) except for temperature; the default is 6500K.
    My printer is an HP Photosmart Pro B9180 Printer, where there are also a variety of settings possible.
    I’m running XP-Pro.
    Here’s Where I Get Confused
    Everything I have read about color management (various web sites, forums, books, etc) says to have the image, monitor, and printer all in the same color space.
    Everything I read about PSE 8 (same sources) says to set PSE 8 to ‘Always Optimize for Printing’ under Edit>Color Settings in order to get the best prints.  This displays photos based on the Adobe RGB color space. 
    I am taking pictures in sRGB, and telling PSE 8 to process them in RGB by selecting ‘Always Optimize for Printing’.  Is this something I should be concerned about?  Should I reset my camera for RGB?
    Further, by selecting ‘Always Optimize for Printing’, I am setting PSE 8 for RGB while my monitor displays sRGB.  Is this an important issue or is it also much ado about technicalities that an amateur should not worry about?  It does violate the ‘keep them in the same color space’ rule.
    Next, when I go to File>Print and get the Print window and then do the Page Setup and Select Printer, I then go to More Options in the lower left of the window.  Under the More Options window, I select Color management and select Photoshop Elements Manages Colors.  Next, there is Image Space, which is fixed and not subject to selection from a drop down menu. 
    I understand that this is the image space of the image I took with my camera and that information is embedded in the image.  Correct?
    Next, there is Printer Profile.  But, from what I have read, this is where the IEC profile of the paper being printed on is supposed to be selected, isn’t it? 
    Shouldn’t this more appropriately be called Paper Profile, or Printing Media Profile?  Further, this drop down menu appears to be somewhat erratic, sometimes showing all of the paper profiles I believe are loaded, sometimes not. It also shows listings such as Working RGB-Adobe RGB (1988), Adobe RGB 1988, Dot Gain 10%, 15%.... along with a lot of paper profiles.  Aren’t those profiles unnecessary here?
    I’ve used both Relative Colorimetric and Perceptual Rendering and am happy with either one. 
    Next, when I go to Printer Preferences, in order to “…disable color management in the printer preferences dialog”, under the Color Tab, I select Application Managed Colors from the Color management drop down menu, and also have the option of selecting ColorSmart/sRGB and Adobe RGB (1988).  
    Is there any time when I should use either ColorSmart/sRGB or Adobe RGB  (1988)?  If I were staying with my camera’s sRGB setting, given the fact that the monitor is sRGB, would the appropriate selections be ‘Printer Manages Colors’ and ‘ColorSmart/sRGB’?
    Finally, under the Features Tab, I go to look for the same paper I selected under Printer Profile (Question 4 above).  If it is one of the pre-loaded (by HP) profiles, it is there, but if it is a profile I downloaded, say for an Ilford paper, it isn’t listed, and I need to guess at an equivalent type of paper to select.
    Is there any way to get that listing to appear under the Paper Type drop down menu?
    I know that this is a long post, but it helped me to clarify my ‘issues’.  Thank you for any and all suggestions, answers, guidance and help.

    RIK,
    Some printers have long names, esp. HP printers, and PSE gets ":confused." In control panel>devices and printers, right click on the default printer, go to printer properties, and rename the default printer to something short, e.g. "Our Printer." That may fix it..

  • Remove element from xml using dom.

    i want to remove an element from an xml file using dom.
    i remove the element but the whole content of the file is also deleted.
    how can i rewrite the file.

    vij_ay wrote:
    subject :Remove element from xml,but if empty element in input file then output should be <tag></tag>, not like <tag.xml/>I assume you mean <tag/> but why do you want this? Any application that will not accept this valid XML construct is flawed and a bug report should be raised against it.

  • What can I do with Creative Cloud and Photoshop ELEMENTS besides backup my photos?

    What can I do with Creative Cloud and Photoshop ELEMENTS besides backup my photos?

    Umm, seriously? No offense, but what you are saying is basically "I just bought a Mercedes, but don't know how to drive." You can plenty of info what each program in Creative Cloud does by just typing the respective words into a web search...
    Mylenium

  • Adobe User Manual for Elements 6 for Mac

    Good afternoon,
    Can anybody help me and tell where i would a downloadable version of the Photoshop Elements 6 for Mac User Manual please.  I have (somehow) found and downloaded the PC version when i was trialling Elements on my Windows Laptop but cant find Mac version.  I use Elements on my Mac Desktop, hence request.
    I downloaded the software but i am working away from home and thought i would use my spare time to read up.
    Regards
    Alan

    I'm not sure if this will work, but it's worth a try. Go here:
    http://community.adobe.com/help/search.html;jsessionid=92B80DB5BDE130C1D95EC50F0C909623?q= photoshop+elements+6&lbl=photoshopelements_product_adobelr&hl=en_US&lr=en_US&self=1&area=0
    and right-click/control click on the Photoshop Elements 6 link directly beneath the Adobe TV link (the one that says mac in the small print below the link text) and choose to download the linked file.

  • Emergency!! How to remove elements from a set? or..?

    How do I remove elements from a Set?
    If I have Set s1and s2, I want to create a new set which consist of all elements in s1 but not in the s2.
    Which means, I have to s1.union(s2) and then remove elements of s2.
    Is there any method which has this function (remove elment from a set)?
    Or is there any other better way to solve this (which doesn't have to remove anything)?
    If not, how to design a method which will do this job?
    Your help will be very much appreciated.

    Hi
    you can use method removeAll() from set
    s1.removeAll(s2);
    so s1 contains all the element not in s2.
    If you want to lef s1 unmodifyed you have to create a copy.
    Set s3 = s1.clone();
    s3.ramoveAll(s2);
    bye
    Nicola.

  • I just bought a 5g iPod touch and was wondering if there were any ihomes out or coming out soon that are compatible with this device? I know about the lightning adapters but read about their bad reviews and would like to avoid buying one for my ihome

    I just bought a 5g iPod touch and was wondering if there were any ihomes out or coming out soon that are compatible with this device. I know there are adapters and cables you can purchase to use with your existing ihome but read the poor reviews on them and was scared away. I use my ihome very regularly and need this accessory to work with my new iPod. If you have any information on this, please help!

    iHome already makes docks that support the Lightning connector:
    http://www.ihomeaudio.com/products/#/?filter=28
    Regards.

  • HT2577 How do I remove RDC from my mac knowing that my lab programmer has accessed my mac?

    How do I remove RDC from my Mac knowing that the lab programmer has accessed my MacBook Pro from their PC and has been accessing my Mac for several months and downloading my personal files and emails to view?

    1.  You cannot download files with RDC.
    2.  RDC is a Microsoft product, and not related to Apple Remote Desktop..the focus of this forum
    3.  Per #1..clarify what exactly you're talking about.

  • How can I remove iCloud from my Mac Book and iPad and Mac Book Air and then just reload back on the MB Air and iPad only?

    How can I remove iCloud from my Mac Book and iPad and Mac Book Air and then just reload back on the MB Air and iPad only, which have a different user with a separate Apple ID?

    You have quite muddied up the waters, I'm afraid. Assuming you now have a single GUID partition formatted Mac OS Extended, Journaled, you should try reinstalling Lion:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • 32 Bit HDR Problem With Lightroom and Photoshop CS6

    Hello all:
    In following Julieanne's Adobe TV topic here ->  http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/quick-tip-creating-32bi t-hdr-images-in-lr-41/ a problem arises when trying to save from Photoshop CS 6. According to Julieanne you hit ctrl-s so that PS saves the HDR image and then it should show up in Lightroom. What I have found is that hitting crtrl-s saves it as a PSD file which does automatically show up in Lightroom, however Lightroom but  can't read it. If I do a save-as, and select TIFF as the extension Lightroom will not automatically see the TIFF file. I have to synchronize the folder in order to have Lightroom import it.
    Why would Lightroom automatically see a PSD file (that is of no use) and not see the TIFF file?
    Is there a setting in PS that will change the preferences to save as a TIFF instead of a PSD file?
    Using Lightroom 4.2 and Photoshop CS6.
    Thanks,
    Terry

    Go to LR's preferences > External Editing tab and change the top pop-up to TIFF and you should be all set.

Maybe you are looking for