I there a problem with email notifications?

Hi.Since yesterday morning, I am no longer receiving email notifications through my email provider regarding new postings on threads that I've commented on in this forum, although I can still see them under my profile on this website.I haven't edited my preferences or my spam controls but they don't appear in the spam either.Anybody experiencing the same?

You're telling me! I made the mistake of clicking on "receive email notifications" for every community so ended up with about 300 emails! But of course it was a website problem, not my settings.To top it all, as soon as I deleted all the emails, the Wi-Fi on my W995 decided it had enough and couldn't even find my router in the same room.I've just handed it in for a warranty repair (hopefully) as it's less than 3 months old and no amount of troubleshooting (update service, soft reset, hard reset,update service no 2, phone repair and update service no 3) could fix it.They say it comes in threes....

Similar Messages

  • Problem with email notifications?

    I don't seem to be getting the email notifications after about 11 am EST today.
    I've not changed my profile, or my email address (a dot-mac address), and am receiving other mail in that account.
    There are at least 3 threads in the Time Machine forum, and one in Leopard/Installation and setup, that have had responses since then, but I've not seen the emails.
    Is it just me?

    I finally got one (8:40 pm EDT), so I guess it's working again. Never did get the missing ones . . .

  • Problem with Email-notification

    Hi all,
    I have the following problem:
    When a user has problems to logon he can request help via a button on the logon page. By clicking the button an email is sent to the administrators of the system. My problem is that we have several users with administrator role assigned but not all of them should get those emails. I checked the value ume.notification.admin_email and set a single email adress but still all users with assigned admin role get these "problem emails". Is there any way to set which specific users get those emails ?
    My system is WebAS 6.40.
    Thanks for the help.
    Regards,
    Oliver Krehan

    Hi,
    We saw this issue quite sometime ago and i believe it was supposed to be fixed but we never did see that.  We disabled (hid) that function as being availabe from the Get Support link.
    Did you ever get a solution?
    Scott

  • Problem with Email Notification in Oracle 10g

    Hello Guys,
    I have the following simple stored procedure for notifying emails.The procedure is getting executed successfully, but no email is being sent to mailbox, any help is appreciable.!! I'm very new to write this pl/sql stuff..!!! This is a very Urgent issue, need help ASAP.Thanks
    Source Code:
    CREATE OR REPLACE PROCEDURE Test_mail (sender IN VARCHAR2,
    recipient IN VARCHAR2,
    message IN VARCHAR2)
    IS
    mailhost VARCHAR2(30) := 'mail.sfsu.edu';
    mail_conn utl_smtp.connection;
    BEGIN
    mail_conn := utl_smtp.open_connection(mailhost, 25);
    utl_smtp.helo(mail_conn, mailhost);
    utl_smtp.mail(mail_conn, sender);
    utl_smtp.rcpt(mail_conn, recipient);
    utl_smtp.data(mail_conn, message);
    utl_smtp.quit(mail_conn);
    EXCEPTION
    WHEN OTHERS THEN
    dbms_output.put_line('error');
    END Test_mail;

    Thanks for ur help,
    I got the below msg in command prompt when I fired telnet mailserver 25
    ..could not open connection to host, connection failed.
    So how to sort out this problem?
    How does mailserver 25 points to my smtp server (mail.sfsu.edu)?
    is there any otherway to test? either yahoo or gmail?
    Thanks, looking farward to ur reply, appreciate ur help.

  • Problem with Email notifications in SOA 11g

    Exception: java.util.ArrayList cannot be cast to org.w3c.dom.Element
    i'm getting the follwoing error while trying to use the email acitivity in SOA 11g. I'm using the 11.1.1.3.0 version...Is there any solution for this?
    Thanks,
    Satish

    Go to soa-infra under SOA in EM console, now go to SOA Administration, then go to workflow notification properties...
    now set the notification mode to email, and also under the notification service...fill email addresses in from address, reply address and actionable address...
    Let me know how it goes...
    Thanks,
    N

  • I am having a problem with email, when I delete messages from my Ipad, they come back into trash whether they are on my PC or not. The only way I can delete them is to to my providers site and delete everything there.

    I am having a problem with email. I can receive and send, but when I delete, the deleted messages return into either Trash or Bin or both whether or not I have deleted them from my PC.
    The only way I can get rid of them permanently, is to go into my area of my providers site(Sky) and empty all of the boxes there. I imagine it's a setting, please advise.

    For IMAP mail only.
    Settings>Mail, Contacts, Calendars>tap on mail account>Archieve Messages>OFF

  • Is there a problem with ios 5.1 and gmail?  No email has downloaded since 7-18.

    Is there a problem with ios 5.1 and gmail?  No email has downloaded since 7-18.

    No. Try deleting the account and re-adding it.

  • Is there a problem with this latest update?

    I have tried several times to instal latest player and for some reason it will not get past step 2 of 3. I can download and hit save, run and then nothing. Is there a problem with this latest update? I use Vista and run Firefox

    I tried to install the one you just suggested on 4/14 and it got as far as opening the installer box then went to white screen for 15min till i had to restart computer. And this morning windows updated and again flash wanted an update so after cleaning flash memory and running a cleaner i tried again. and this time got to step 2of 3 again. I am still running 16.0.0.30.5 It will not update any further
          From: m_vargas <[email protected]>
    To: John Ockajik <[email protected]>
    Sent: Tuesday, April 14, 2015 10:50 AM
    Subject:  Is there a problem with this latest update?
    Is there a problem with this latest update?
    created by m_vargas in Installing Flash Player - View the full discussionHi, We have several different installer files.  Having the file name narrows down which one is being problematic. There was a Flash Player release earlier this morning and several files have been updated.  Please try downloading again.  If you experience the same problem, please clear the browser cache, as the old one may still be downloading.  If the issue persists after clearing the browser cache, please post the name of the file that is being downloaded. Thank you. --Maria If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7437403#7437403 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7437403#7437403 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
    Start a new discussion in Installing Flash Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Problems with email and SMS after 1.3.5

    Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
    I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send. 
    The same for messaging. I don't use it very often. But yesterday I get a text message  and tried to respond and got the error message.
    I power the phone off every night because I have a landline and use that as the primary phone at home.
    I have been looking around message boards trying to find a fix for this.  Has anyone had this issue and resolved it?
    Thank you.
    Post relates to: Pre p100eww (Sprint)
    Message Edited by starburst42 on 01-05-2010 07:06 AM
    This question was solved.
    View Solution.

    I forgot to add that this is a stock Pre. There are no patches or homebrew apps. 
    Edit:
    I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating.  Here is the info, and the link.  I really wish Palm would put info about this work around on their site, or at least make it easy for people to find.  The solution is the last message in the thread linked below:
    Had the same problem.  Checked with Earthlink - no help.  Checked with Sprint - no help.  Checked with Palm - no help.  Here is what finally worked:
    Delete the earthlink account and start over.  When you do - this is the key - set up the account manually!  If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
    "smtpauth.earthlink.net"
    Use Authentication set to "on"
    username is your email address
    your email password
    port set to "587"
    encryption "none"
    Again, the key is to set up manually.
    smtp email fix
    Message Edited by starburst42 on 01-06-2010 12:08 PM
    Message Edited by starburst42 on 01-06-2010 12:09 PM

  • Is there a problem with Apple Mail using IMAP

    Is there a problem with Apple Mail using IMAP?  Having a problem syncing to our mail server: doesn't sync properly when multiple devices use same mail acct.  Spoken w/ mail hosting provider who says Apple Mail doesn't follow IMAP protocol properly leaving Apple Mail users to experience a variety of problems when connecting to IMAP accounts.  Among them:
    - Improper syncing
    - Proliferation of drafts during composition of an email.
    - Connections on the mail host do not close automatically and proliferate over time until the host rejects further connection requests.
    Hosting provider goes on to suggest turning off IDLE command.  In my experience turning this feature off did not improve the situation.  In fact, it created a few.
    Question: Is the hosting provider correct in faulting Apple Mail?
    Been fielding the question with a number of people.  I'm aware of three people who are experiencing similar problems, each using different mail hosts.  Tech reps at inmotionhosting.com and nexcess.com point the finger at a Apple Mail, along with an IT specialist in Los Angeles, CA, and a tech support rep at an Apple Store in Arizona who said that Apple and Google mail are aware of and coordinating to resolve the problem.
    Anyone out there have any insights into this?

    Is there a problem with Apple Mail using IMAP?  Having a problem syncing to our mail server: doesn't sync properly when multiple devices use same mail acct.  Spoken w/ mail hosting provider who says Apple Mail doesn't follow IMAP protocol properly leaving Apple Mail users to experience a variety of problems when connecting to IMAP accounts.  Among them:
    - Improper syncing
    - Proliferation of drafts during composition of an email.
    - Connections on the mail host do not close automatically and proliferate over time until the host rejects further connection requests.
    Hosting provider goes on to suggest turning off IDLE command.  In my experience turning this feature off did not improve the situation.  In fact, it created a few.
    Question: Is the hosting provider correct in faulting Apple Mail?
    Been fielding the question with a number of people.  I'm aware of three people who are experiencing similar problems, each using different mail hosts.  Tech reps at inmotionhosting.com and nexcess.com point the finger at a Apple Mail, along with an IT specialist in Los Angeles, CA, and a tech support rep at an Apple Store in Arizona who said that Apple and Google mail are aware of and coordinating to resolve the problem.
    Anyone out there have any insights into this?

  • Dear Fellows. Is there a problem with iPhones mail in general retrieved mail ?

    Is there a problem with iPhones mail in general retrieved mail ?

    My error message reads....  "Cannot get mail"...the mail server imap.gmail.com<http://imap.gmail.com> is not responding"
    John J. Divers https://discussions.apple.com/Roof Logo Small
    Chief Operating Officer and
    Chief Financial Officer
    ******<x-apple-msg-load://8778A9C9-0671-419A-B2DB-CD4A3315BA86/*****>
        https://discussions.apple.com/CDT Logo for Email Signature <http://www.cdt.biz/>
    tel:  212-271-5084<tel:212-271-5084>
    fax: 212-271-5079<tel:212-271-5079>
    *****<x-apple-data-detectors://1/2>
    New York, NY 10018-7702<x-apple-data-detectors://1/2>
    <Personal Information Edited By Host>

  • Problem with Emailing the Internal table data as an excel attachment

    Hi Friends,
    I am facing problem with Emailing an internal table data as an excel file. I am using standard function module "SO_NEW_DOCUMENT_ATT_SEND_API1" which is using SOLI structure can have record with 255 character length. But my Internal table having each record means after concatenating all the fields it is going to be morethan 450 characters. so i t is not displaying all the data in excel file.
    Can somebody help me if there is any other function module or any other way that i need to follow.
    thanks for help
    venkat.

    You must use the the :
    CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB as a field seperator and
    CL_ABAP_CHAR_UTILITIES=>CR_LF as a record seperator.
    Check this example:
    http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
    Regards,
    Naimesh Patel

  • Is there a problem with skype at the moment?

    Hello folks.
    I'm running a G4 and 10.411 using an old version of skype with a software patch that I found in one of the skype topics on this site. It has been working fine for months now. I don't use video just audio. I have a subscription to call land lines. The problem I am having is that I can call out and hear the person I am calling, but they can't hear me. Is there a problem with skype today? Or have they made changes as of today that do not permit people to use the patch and an old version of skype? Any information would be much appreciated.
    Solved!
    Go to Solution.

    The problem has seemed to have gone away. The problem started yesterday on two different computers. Today, on one of the computers I ran a utility called Mcjanitor that I had installed years ago but very rarely ran it. I neglected to try skype prior to running the utility. On computer #2 I tried booting from an old utility disk called techtoolpro. I was unable to boot from the disk after several attempts and restarts. Both computers are running better and skype now works again on both. I sent an email earlier today to a tech support guy from my ISP about my recent problems with skype. In conclusion I can't explain why skype now works on both computers. I can only guess that I reset something when I used (attempted to use) a utility disk. The other possibility is that my ISP guy did something on his end. Or, lastly, that skype had problems that were remedied by skype today.

  • Several problems with email

    I've been having several problems with email.  
    1. I sent email on Dec 10 and the people didn't receive them until Dec 16.
    2. I often get two, three or even four copies of the same email in my Thunderbird client.
    3. My Moto X (2nd gen) phone sometimes says it can't connect to email. 
    What's the problem?

    Thanks for reaching out to us JoAnn108. We'll do everything possible to address this for you.
    Could you tell me how long this has been an issue? I noticed you mentnioned Thunderbird; do you experience the same problems when working with your emails directly from the Verizon webmail portal? Also, are there any error messages you notice when the issue occurs? If we can get some answers to these questions it'll help determine our troubleshooting path.
    Thanks,
    ^FCN

  • Problem with email being tagged as spam

    We recently changed our ISP, and up to this point we had no problems with emails to partners being tagged as spam. I've setup the send and receive connectors as the public FQDN, but we're seeing the following NDR:
    p01c12m113.mxlogic.net #554 Denied[CS] [50e56f35.0.4929.00-2377.9578.p01c12m113.mxlogic.net]
    (Mode: normal) ##
    I've emailed McAfee to see what the problem is, but I haven't heard back. When I do a query on their web site, the web interface doesn't indicate there is a problem with this mail server, but it's continued to reject messages today. Even though the send
    and receive connectors are set to mail.domain.com, but there still a portion of the header with the domain.local. I'm wondering if that might be causing a problem. Can anyone help me out here? Thank you.
    Return-path: <[email protected]>
    Envelope-to: [email protected]
    Delivery-date: Thu, 21 Aug 2014 16:16:30 -0500
    Received: from mail.domain.com ([68.106.69.243]:51586)
    by server.rcvdomain.com with esmtps (TLSv1:AES128-SHA:128)
    (Exim 4.82)
    (envelope-from <[email protected]>)
    id 1XKZiX-00065C-Kj
    for [email protected]; Thu, 21 Aug 2014 16:16:21 -0500
    Received: from server.domain.local ([fe80::69d5:9cfa:1b4e:dfa3]) by
     server.domain.local ([fe80::69d5:9cfa:1b4e:dfa3%10]) with mapi id
     14.01.0438.000; Thu, 21 Aug 2014 16:16:21 -0500
    From: User <[email protected]>
    To: "[email protected]" <[email protected]>
    Subject: Help
    Thread-Topic: Help
    Thread-Index: Ac+9hSb9q5a7FGZpQG2YPEX62Lunhw==
    Date: Thu, 21 Aug 2014 21:16:20 +0000
    <o:p></o:p>

    ok lets start one by one.. to rule out the problem with your Email system go to www.testexchangeconnectivity.com and perform the exchange tests like inbound/ outbound and other relevant tests and share the results. once this is confirmed then come to Mcafee
    Let me know which Exchange and which Mcafee versions you are using as i also have Mcafee and it needs some tuning. May be i can help you. but need to know the info and if you can paste a NDR which are tagged as SPAM
    MARK AS USEFUL/ANSWER IF IT DID
    Thanks
    Happiness Always
    Jatin

Maybe you are looking for

  • How to create CO-PA objects in 7.0 (0G_Qx)?

    I'm trying to create a CO-PA model in our BI 7.0 system. I've succesfully created a datasource in the source system and replicated it (not as a 3.x datasource). According to the "performance assistant" in the source system, the next step is to create

  • Column name problem

    Hi all.... I have a little strange problem.. I hope you all can help me in solving this. for brief intro, I have an web application on MySQL written entirely in JAVA. Now we want to migrate from MySQL to Oracle... We have used Oracle Migration Workbe

  • Iphoto - restoring events/albums

    I am using OSX 10.6.8 and Iphoto 11 9.2.1. It was not responding so I did the alt and create new album thing - its works now. But I have nothing in it. How do I restore all my events/ albums and slideshows??? I found iphoto in time machine and tried

  • Putting messages direct to OracleAS JMS

    Hi Folks, I'm developing a .NET Application and I need to send messages to a destination(queue) in the Oracle Application Server using OracleAS JMS. Does anyone know how to do that? Thanks in advance, Patrick

  • Multi-lingual String Shortening

    Hey all, I've got a program that allows the user to name certain objects. These names need to be displayed in a variety of places and there may different amounts of space. I didn't like JLabel's default way of displaying names that are too long to fi